Polish Airports vol.1/2/3 for FS2004
All Polish Airports products for FS2004
Problem z EPWR
Witam mam problem z EPWR. Jest tak samo jak w EPPO przed aktualizacja czyli problem z ATC. Co mozna z tym zrobic??
Re: Problem z EPWR
Ewidentnie są powpisywane złe częstotliwości dla ATC. Staszku zróbcie coś z tym proszę. Ja sobie poradzę, ale nie wiem czy wszyscy. Nie każdy lata online.kamil484 wrote:Witam mam problem z EPWR. Jest tak samo jak w EPPO przed aktualizacja czyli problem z ATC. Co mozna z tym zrobic??
[ Dodano: Sro Lis 28, 2012 15:34 ]
Druga sprawa to kolejność pasów startowych. Np, Wrocław. Pogoda: EPWR 271400Z 00000KT 3000 -RA BR SCT025 BKN033 09/08 Q1007, dla leniwych: Wind: 360 True, 0 Kts
Vis: 2998 Meters, 2 SM
Clouds: 2500 Scattered, 3300 Broken
Precip: Light Rain
Temp: 9C Dew: 8C
Pressure: 1007 mb, 29.74 inches
A ATC daje mi ILS29 CTL11
Holo
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Latanie z default ATC jest tak samo realistyczne jak latanie z default sceneriami. Jeśli ktoś na poważnie lata offline (a skoro kupuje dodatki, to znaczy, że na poważnie) zdecydowanie polecam http://www.jdtllc.com/ .
Kusisz Stanisławie. Może na gwiazdkę sobie sprawię, bo teraz nie dam rady ściągnąć przez mojego neta służbowego. Kraków zakupiony po promocji też czeka na powrót z delegacji.
A żeby nie było tak OT, to poprawiłem sobie częstotliwość APP we WRO (z .220 na .225), bo FS tej rzeczywistej nie łyka i odwróciłem pasy w Poznaniu i Wrocławiu. Teraz można lepiej trochę się pobawić.
A żeby nie było tak OT, to poprawiłem sobie częstotliwość APP we WRO (z .220 na .225), bo FS tej rzeczywistej nie łyka i odwróciłem pasy w Poznaniu i Wrocławiu. Teraz można lepiej trochę się pobawić.
Holo
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Jesli polecasz Staszku ten produkt to rzeczywiscie musi byc dobry wiec sprobuje .Ja tez latam na defaultowym i czasem podaje dziwne dane ,wiec najwyzszy czas sprobowac czegos nowego.
ps:jako firma DD zdobyliscie zaufanie na swiecie wydajac produkty najwyzszej klasy,wiec gdzie kolwiek bede mial stycznosc z ludzmi ktorzy kochaja samoloty,symulatory etc.,bede polecal Wasz produkt ,bo jestem dumny z tego jak Polska i nasze lotniska sa tak realistycznie odtworzone w virtualnym swiecie.
Pozdrawiam
Slawek
ps:jako firma DD zdobyliscie zaufanie na swiecie wydajac produkty najwyzszej klasy,wiec gdzie kolwiek bede mial stycznosc z ludzmi ktorzy kochaja samoloty,symulatory etc.,bede polecal Wasz produkt ,bo jestem dumny z tego jak Polska i nasze lotniska sa tak realistycznie odtworzone w virtualnym swiecie.
Pozdrawiam
Slawek
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Do znów ja...
Leciałem sobie dziś jak biały człowiek do Poznania (DD) z Fraknfurtu (AS) Embraerem 190 (FD). Jakież było moje zdziwienie, gdy na podejściu zobaczyłem autogen (UTE).
Gdy wczytam Poznań po uruchomieniu symulatora jest ok.
Można coś z tym zrobić?
Obrazek poglądowy w załączeniu.
http://img96.imageshack.us/img96/9719/eppo.jpg
Leciałem sobie dziś jak biały człowiek do Poznania (DD) z Fraknfurtu (AS) Embraerem 190 (FD). Jakież było moje zdziwienie, gdy na podejściu zobaczyłem autogen (UTE).
Gdy wczytam Poznań po uruchomieniu symulatora jest ok.
Można coś z tym zrobić?
Obrazek poglądowy w załączeniu.
http://img96.imageshack.us/img96/9719/eppo.jpg
Holo
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Version 1.8 of this product (update from 1.5 to 1. is now published.
The update corrects all known issues with the product. It also adds new navaids and corrects some other AFCAD stuff.
VOR WCL
DME "WCW"
51*04'58.0" / 16*57'06.5"
Freq: 117.2 MHz
Range: 110 nm
http://drzewiecki-design.net/forum/view ... =1950#1950
The update corrects all known issues with the product. It also adds new navaids and corrects some other AFCAD stuff.
VOR WCL
DME "WCW"
51*04'58.0" / 16*57'06.5"
Freq: 117.2 MHz
Range: 110 nm
http://drzewiecki-design.net/forum/view ... =1950#1950
Hi.
Thanks for update.
Can I install this update 1.8 if I have already update 1.7 installed? I installed update 1.8 but in manual still is V 1.7 so I'm not sure is it installed correctly
Because it said (update from 1.5 to 1..
Or I must uninstall all and then install 1.5 with 1.8 update.
Few months ago I installed update 1.7.
Thanks
Edin
Thanks for update.
Can I install this update 1.8 if I have already update 1.7 installed? I installed update 1.8 but in manual still is V 1.7 so I'm not sure is it installed correctly
Because it said (update from 1.5 to 1..
Or I must uninstall all and then install 1.5 with 1.8 update.
Few months ago I installed update 1.7.
Thanks
Edin
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hello Stanislaw,
I purchased Polish Airports vol.3 for FS2004 at Simmarket's Easter Sale but there is a problem with AES v.2.30 at EPWR.
At apron 2 the gates A8 till A13 are not connected to the building.
I thought it was a AES related but i got an reaction from Oliver Pabst at the Aerosoft forum and he wrote that he can't reproduce the issue with his installer.
See the whole topic with pictures etc at: http://goo.gl/nPyyq
Anyway he wrote: Maybe there is a difference between the Aerosoft Version and the Version provided by Drzewiecki Design.
I'm not the only one with this problem because other costumers wrote at Aerosofts forum that they have the same issue.
So, i hope you have the solution for us.
Many thanks in advance.
Best regards,
Ad Ording
The Netherlands
I purchased Polish Airports vol.3 for FS2004 at Simmarket's Easter Sale but there is a problem with AES v.2.30 at EPWR.
At apron 2 the gates A8 till A13 are not connected to the building.
I thought it was a AES related but i got an reaction from Oliver Pabst at the Aerosoft forum and he wrote that he can't reproduce the issue with his installer.
See the whole topic with pictures etc at: http://goo.gl/nPyyq
Anyway he wrote: Maybe there is a difference between the Aerosoft Version and the Version provided by Drzewiecki Design.
I'm not the only one with this problem because other costumers wrote at Aerosofts forum that they have the same issue.
So, i hope you have the solution for us.
Many thanks in advance.
Best regards,
Ad Ording
The Netherlands