UUEE Moscow Sheremetyevo 2015

Latest version: v1.8 (2016)

Archive only - support discontinued
Locked
Stary
5-12 posts
5-12 posts
Posts: 5
Joined: Saturday 20 Sep 2014, 06:47
Location: Moscow

Post by Stary »

Stas, please! Make movement on airfield! Don't assimilate to a scene of Dubai from FlyTampa! The scene looks boring without movement! :cry: Start up couple of cars at least :)
GeyerH
26-49 posts
26-49 posts
Posts: 38
Joined: Tuesday 26 Nov 2013, 10:33
Location: Dresden, Germany

Post by GeyerH »

Good evening,
here are some screenshots:
At day
http://i92.photobucket.com/albums/l2/Ge ... 43fdc4.jpg

at night (FPS significantly higher)
http://i92.photobucket.com/albums/l2/Ge ... ee4a3b.jpg

these are the lines mentioned above - a minor problem IMHO
http://i92.photobucket.com/albums/l2/Ge ... 7fd8c2.jpg

Spotter's paradise
http://i92.photobucket.com/albums/l2/Ge ... 420ce3.jpg

Regards,
Harald
bankii
5-12 posts
5-12 posts
Posts: 7
Joined: Tuesday 23 Sep 2014, 21:56
Location: Hungary

Post by bankii »

Hi Stanislaw!

My problem is that the new scenery after 5-7 minutes of the restart FS9 error message, and if I'm using an older UUEE it will run without problems in the FS.

The operating system is Win7, Nvidia GeForce GTX 465 typ. video card, Intel iCore i7-2600 3,4GHz, 12GM RAM, 1280x1014 / 60Hz.

Pls HELP me!
Of course, genuine full version.

THX, Istvan.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

bankii wrote:FS9 error message
DD Stanislaw wrote:FS9's crashes are usually related to no 9.1 update installed or to wrongly assigned graphic settings in your graphic card. Any edge smoothing (AA / Anizo filtering) done by your graphic card instead of your sim, might lead to its crash. The balance is very delicate and it is not related to our scenery in particular. And the VAS memory usage is marginal (obviously it is always nice to have 4-6 GB of RAM onboard).
I've tried the same thing with NVIDIA 3D settings (Quadro K5000M) and the result was an FS9 crash each 5 minutes (no 9.1 update though).
Image
Patrick Chaieb
26-49 posts
26-49 posts
Posts: 49
Joined: Sunday 22 Sep 2013, 08:29
Location: Switzerland

Post by Patrick Chaieb »

Hi Stan

Unfortunately for me the same. My fs9 crashes every time at UUEE. Don't have this problem with other addons, although my PC is a bit old, other addons are working well.
It crashes also with the lowest version installed(all 4possible boxes activated) and without Ai traffic. But strange, the Fps are ok. Fs9.1 patch is installed.
Regards
Best Regards
Patrick
madetvik
2-4 posts
2-4 posts
Posts: 2
Joined: Monday 03 Feb 2014, 22:34
Location: Prague, Czech Republic

Post by madetvik »

bankii wrote:Hi Stanislaw!

My problem is that the new scenery after 5-7 minutes of the restart FS9 error message, and if I'm using an older UUEE it will run without problems in the FS.

The operating system is Win7, Nvidia GeForce GTX 465 typ. video card, Intel iCore i7-2600 3,4GHz, 12GM RAM, 1280x1014 / 60Hz.

Pls HELP me!
Of course, genuine full version.

THX, Istvan.
Hi Stаnislаw

I hаve sаme problem. 7-10 minutes scenery working. Аfter 10 minutes crаsh. But your scenery EETN is very good working, hаve not problem. Аnd i hаve more scenery from FSDreаm, Cloud9, Аerosofts, аll sceneries is prefect working, but UUEE is working for 7-10 min аnd sim crаsh((((. Mаy be repаir UUEE to light scenery?)))) I hаve а FS9.1 version.

Thx
Image
Petrovich
13-25 posts
13-25 posts
Posts: 22
Joined: Wednesday 24 Sep 2014, 12:04
Location: MOW | RU

Post by Petrovich »

For those who have an OOM error with the brand new UUEE 2015 scenery please do the following:
1. Create new folder ('UUEE_2015_LC' for example) with 'scenery' subfolder inside
2. Move two LD_*.bgl files into the 'UUEE_2015_LC\scenery' folder
3. Add UUEE_2015_LC to the FS9 Scenery Library below UUEE 2015 scenery
4. Run FS


The method above works for me.


Stan, I have noticed two minor bugs:
- blurred textures of the hangar near to RWY 07L threshold
- flickering textures of the hangar close to terminals C and B

Btw afcad is terrible :) but it should be easily fixed on my own.
Patrick Chaieb
26-49 posts
26-49 posts
Posts: 49
Joined: Sunday 22 Sep 2013, 08:29
Location: Switzerland

Post by Patrick Chaieb »

Thanks for the possible solution. Will try it asap and report.
With the Afcad I'm not happy too but first priority is now to solve the Ooms

Patrick
Best Regards
Patrick
Petrovich
13-25 posts
13-25 posts
Posts: 22
Joined: Wednesday 24 Sep 2014, 12:04
Location: MOW | RU

Post by Petrovich »

Guys,
I would recommend you to install (...)

Please do not advertise here.
Patrick Chaieb
26-49 posts
26-49 posts
Posts: 49
Joined: Sunday 22 Sep 2013, 08:29
Location: Switzerland

Post by Patrick Chaieb »

First of all, thank you again Petrovich for the OOM solution. After I did this, I could do a test flight without OOM. Will try to do some several more this evening.

@all
After I arrived, I had flickering ground textures. I loaded my flight att UUEE (the ground textures were ok, took off, did a short trip at around 12'000 ft and landed back after app.20min on RWY 25L. After vacating from the Runway, this is how it looks like:
http://img.webme.com/pic/p/patrickc/afcad.jpg

There is no other AFCAD included.
Regards
Patrick
Best Regards
Patrick
madetvik
2-4 posts
2-4 posts
Posts: 2
Joined: Monday 03 Feb 2014, 22:34
Location: Prague, Czech Republic

Post by madetvik »

Greаt!!! Super!!! Very good working!!! Thx!!!
Image
Petrovich
13-25 posts
13-25 posts
Posts: 22
Joined: Wednesday 24 Sep 2014, 12:04
Location: MOW | RU

Post by Petrovich »

Patrick Chaieb wrote:After I arrived, I had flickering ground textures.
I confirm flickering ground textures after landing either pilot or AI if you following traffic.
I have an idea, let me check.
Patrick Chaieb
26-49 posts
26-49 posts
Posts: 49
Joined: Sunday 22 Sep 2013, 08:29
Location: Switzerland

Post by Patrick Chaieb »

Petrovich wrote:I confirm flickering ground textures after landing either pilot or AI if you following traffic.
I have an idea, let me check.
Thank you.

2nd flight without OOM even with the UUEEExtra.bgl active. Seems as this was the problem :-).

Regards
Patrick
Best Regards
Patrick
Felix
2-4 posts
2-4 posts
Posts: 4
Joined: Monday 08 Sep 2014, 13:08
Location: Germany

Post by Felix »

All at all a great scenery. It would be nice if you can fix the mentioned issues. An other point I want to ask for is the performance-optimisation. During the approach with my Level D 767 I don't reach the level of 24 frames, most of the time my frames are between 18 and 22. Deactivating the AI-Traffic brings one/two additional frames... But it's also stuttering in the end.

Compared with the MAP Paris CDG it's absolutely confusing. Same conditions (time, settings and LevelD-aircraft), more buidlings, more AI-aircrafts and still frames between 30 and 45...
I can't remember any other scenery whose framerate is as terrible as UUEE.
In my UUEE installation I've removed the static cars and airplanes. But when I deactivate all the details I've enough frames, but then the airport isn't comparable with any other scenery at the moment.
Therefore I want to aks, if there are any further performance-fixes planed or is this issue a mistake caused by myself?

Thank you very much!

Greetings
Felix
Petrovich
13-25 posts
13-25 posts
Posts: 22
Joined: Wednesday 24 Sep 2014, 12:04
Location: MOW | RU

Post by Petrovich »

How to resolve flickering ground textures issue:

1. Download file linked below
https://www.dropbox.com/s/u7aso2qe7mj1b ... t.bgl?dl=0
2. Put it into FS2004/Scenery/World/Scenery
3. Run FS9 and check ground textures
4. Post a short report here
Locked