EPWA Warsaw Chopin Airport X

Latest version: v1.97 (2020)

Post Reply
esemi
0-1 posts
0-1 posts
Posts: 1
Joined: Saturday 07 Nov 2015, 14:04
Location: In the web...

Post by esemi »

Hello,

I have bought EPWA Warsaw Chopin Airport X (FSX/P3D) via www.simw.com. Unfortunately when I run the setup downloaded from there it says it's version 1.2. How can I upgrade to version 1.4?
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Image
boeing_787
2-4 posts
2-4 posts
Posts: 3
Joined: Saturday 07 Nov 2015, 18:12
Location: Warszawa

AES problem

Post by boeing_787 »

Hallo Stas, i use in Warsaw Chopin AES, how to deactivate SODE finger? i see double finger on the gate. Thanks
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Hello. All needed files were provided to AES designers and should be included together with AES. If this is not the case, please contact AES support.
Image
boeing_787
2-4 posts
2-4 posts
Posts: 3
Joined: Saturday 07 Nov 2015, 18:12
Location: Warszawa

SODE

Post by boeing_787 »

Iknow, but you're the developer, and you must know. the jetways SODE are inside one bgl, could you tell my the name of this file? so i deactivate manually.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Negative, you can't do it by removing any files.

Simply put THIS FILE into FSX\SODE\sdx\DrzewieckiDesign .
Image
boeing_787
2-4 posts
2-4 posts
Posts: 3
Joined: Saturday 07 Nov 2015, 18:12
Location: Warszawa

Post by boeing_787 »

I resolved, i deleted all jetways mdl from sode in drzewieki design folder.
Sebol
26-49 posts
26-49 posts
Posts: 35
Joined: Thursday 16 Jul 2015, 09:04
Location: Warsaw

Post by Sebol »

Hejka. Czy to normalne, ¿e podczas gorszej pogody (ostatnie dni mgliste) rêkawy oddalone dalej od samolotu "znikaj±" i "pojawiaj±" siê gdy siê do nich zbli¿ê?
paazik
0-1 posts
0-1 posts
Posts: 1
Joined: Thursday 19 Nov 2015, 15:09
Location: polska

Post by paazik »

Witam.

Mam pewne problemy za scenerią zainstalowana do P3D v3.

Pierwszy problem.
Brak działającego systemu "dokowania". Nie wyświetlają się "naprowadzacze" na stanowiskach postojowych.

http://skrin.pl/mPFa

Drugi problem.
Brak możliwości sterowania rękawami. Po wywołaniu SODE jedyne opcje to otwarcie drzwi hangaru i wypychanie dreama z hangaru, brak opcji dla rękawów.

http://skrin.pl/Qq_I

http://skrin.pl/mBMB

Trzeci problem.
W menu addons mam zduplikowane menu dla SODE, oba z identycznymi komendami i oba działające. Sprawdziłem pliki DLL.XML oraz EXE.XML i nie mam zduplikowanych wpisów.

http://skrin.pl/FWVr

Dodatkowo zauważyłem braki rękawów na niektórych stanowiskach. Stanowisko 15 ma tylko jeden rękaw a stanowiska 11, 12 są bez rękawów.
Wszystko dzieje się na świeżo zainstalowanym systemie i P3D. Z dodatków mam zainstalowane ORBX Global, Vector, Europe, PMDG 777.

Z góry dziękuję za pomoc.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Proszę o kontakt mailowy, zobaczę przez TeamViewer. Ewidentnie coś jest nie tak z SODE.
Image
Tenala
13-25 posts
13-25 posts
Posts: 16
Joined: Saturday 13 Sep 2014, 06:47
Location: Zurich, Switzerland

Post by Tenala »

Martin_Starski wrote:If in your P3D library the path is correct, please open the Prepar3d scenery.cfg file and find the entry referring to EPWA. If there is the word "REMOTE", please change it into the word "LOCAL", save and let us know if the problem is solved.
add local=addon scenery\EPWA Warsaw Chopin Ariport X and than the scenery runs.
trig2015
2-4 posts
2-4 posts
Posts: 2
Joined: Wednesday 25 Nov 2015, 10:56
Location: herts

active gates

Post by trig2015 »

hi am trying to get the active gates to work i have followed the sod and on stand and I have pressed ctr J and the air gates don't move i couldn't found anything in the manual about it
is there a way to move them please
thanks
martin
User avatar
Mariusz Napora
100-199 posts
100-199 posts
Posts: 107
Joined: Tuesday 13 Jul 2010, 17:02
Name: Mariusz
Location: Warsaw, Poland

Post by Mariusz Napora »

I think You have to press SHIFT + D.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Re: active gates

Post by DD Stanislaw »

trig2015 wrote:couldn't found anything in the manual
Hi Martin.
Please use punctuation.
There is a manual included specifially describing jetway control.
Image
trig2015
2-4 posts
2-4 posts
Posts: 2
Joined: Wednesday 25 Nov 2015, 10:56
Location: herts

Post by trig2015 »

Ok thanks I'll try when I get home
Got the e mail thanks for that too
Martin
Post Reply