EPWA Warsaw Chopin Airport X
Latest version: v1.97 (2020)
- Kuba Pa
- 200+ posts
- Posts: 471
- Joined: Wednesday 22 Sep 2010, 12:17
- Name: Jakub
- Location: Kolbuszowa, Poland
To nie nie zmienia faktu że coś jest nie tak, rękawy które były zmieniane są w pozycji "podniesionej" tak jakby były stare pliki w Simobjects/Misc/DrzewieckiDesign_EPWA natomiast nowy plik w SODE/sdx/DrzewieckiDesign. Może spróbuj odinstalować całkowicie scenerię i wszystkie jej składniki i zainstaluj ponownie nową wersje. Pliki EPWA_Jetway_3DB.MDL EPWA_Jetway_2DB.MDL powinny mieć datę modyfikacji 13.07.2015. Możesz też spróbować ręcznie nadpisać pliki z tej paczki która była wrzucana wcześniej. Jetway777
- Kuba Pa
- 200+ posts
- Posts: 471
- Joined: Wednesday 22 Sep 2010, 12:17
- Name: Jakub
- Location: Kolbuszowa, Poland
Kreski są ustawione tak jak w realu i tak też opisane, niekoniecznie odpowiadają możliwością rękawa. Czyli działa teraz musisz ustawić dobrą wysokość drzwi tego modelu bo widocznie jest za wysoko ustawione.
Trzeba zmniejszyć tą wartość, pewnie około 8-10
777-200LR
[exits]
number_of_exits = 4
exit.0 = 0.4, 33.864, -9.607, 12.298, 0 //Door 2L
exit.1 = 0.4, 49.639, 10.121, -3.736, 1 //Fwd Cargo
exit.2 = 0.4, -46.387, 10.121, -3.736, 1 //Aft Cargo
exit.3 = 0.4, -61.272, 5.341, 2.906, 1 //Bulk Cargo
Trzeba zmniejszyć tą wartość, pewnie około 8-10
777-200LR
[exits]
number_of_exits = 4
exit.0 = 0.4, 33.864, -9.607, 12.298, 0 //Door 2L
exit.1 = 0.4, 49.639, 10.121, -3.736, 1 //Fwd Cargo
exit.2 = 0.4, -46.387, 10.121, -3.736, 1 //Aft Cargo
exit.3 = 0.4, -61.272, 5.341, 2.906, 1 //Bulk Cargo
-
- 2-4 posts
- Posts: 2
- Joined: Monday 27 Jul 2015, 10:16
- Location: Dusseldorf, Germany
I have a problem using the SODE system.
The jetways do not move, but i don't get any error message. I tried various aircraft types and gates. Sometimes I get an error message: "No door parameters found for aircraft type. Hood will not extend". But sometimes I don't get any message.
However the Hangar Doors can be opened.
I tried it with the Aerosoft Airbus, PMDG 777, standard 321 & 737. Do i need to change any settings?
The jetways do not move, but i don't get any error message. I tried various aircraft types and gates. Sometimes I get an error message: "No door parameters found for aircraft type. Hood will not extend". But sometimes I don't get any message.
However the Hangar Doors can be opened.
I tried it with the Aerosoft Airbus, PMDG 777, standard 321 & 737. Do i need to change any settings?
W tym przypadku problem jest z modelem -300, dwusetkę zmodyfikowałem zgodnie z wcześniejszym postem:Kuba Pa wrote:Trzeba zmniejszyć tą wartość, pewnie około 8-10
Ale coś mi mówi, że dane do lokalizacji drzwi trzeba testować metodą prób i błędów, "na czuja" ?mkma wrote:[exits]
number_of_exits = 5
exit.0 = 0.4, 62864, -8607, 6298, 0 // Door 1L
exit.1 = 0.4, 33864, -11607, 6298, 0 // Door 2L
777-300
[exits]
number_of_exits = 5
exit.0 = 0.4, 79.179, -9.607, 6.298, 0 //Door 1L
exit.1 = 0.4, 50.179, -9.607, 6.298, 0 //Door 2L
exit.2 = 0.4, 65.954, 10.121, -3.736, 1 //Fwd Cargo
exit.3 = 0.4, -62.184, 10.121, -3.736, 1 //Aft Cargo
exit.4 = 0.4, -77.069, 5.341, 2.906, 1 //Bulk Cargo
http://i.imgur.com/3EjUg1m.jpg
[exits]
number_of_exits = 5
exit.0 = 0.4, 79.179, -9.607, 6.298, 0 //Door 1L
exit.1 = 0.4, 50.179, -9.607, 6.298, 0 //Door 2L
exit.2 = 0.4, 65.954, 10.121, -3.736, 1 //Fwd Cargo
exit.3 = 0.4, -62.184, 10.121, -3.736, 1 //Aft Cargo
exit.4 = 0.4, -77.069, 5.341, 2.906, 1 //Bulk Cargo
http://i.imgur.com/3EjUg1m.jpg
Czy informacje podane przez Lotnisko Chopina są już zawarte w scenerii? Nie wiem gdzie tego szukać i czy w ogóle coś bym znalazł, także zostawiam link poniżej, by zapoznać się z postem.
---> Facebook <---
---> Facebook <---
Can you check your exe.xml and dll.xml for any double entries concerning SimObjectDisplayEngine.exe and SimObjectAnimationModule.dll? If there are double entries, the behaviour is not predictable. Delete a duplicate entry. This is something the installer should take care of...martimolti wrote:I have a problem using the SODE system.
The jetways do not move, but i don't get any error message. I tried various aircraft types and gates. Sometimes I get an error message:
"No door parameters found for aircraft type. Hood will not extend". But sometimes I don't get any message.
However the Hangar Doors can be opened.
I tried it with the Aerosoft Airbus, PMDG 777, standard 321 & 737. Do i need to change any settings?
-
- 2-4 posts
- Posts: 2
- Joined: Monday 27 Jul 2015, 10:16
- Location: Dusseldorf, Germany
Thank you It works12bPilot wrote:Can you check your exe.xml and dll.xml for any double entries concerning SimObjectDisplayEngine.exe and SimObjectAnimationModule.dll? If there are double entries, the behaviour is not predictable. Delete a duplicate entry. This is something the installer should take care of...martimolti wrote:I have a problem using the SODE system.
The jetways do not move, but i don't get any error message. I tried various aircraft types and gates. Sometimes I get an error message:
"No door parameters found for aircraft type. Hood will not extend". But sometimes I don't get any message.
However the Hangar Doors can be opened.
I tried it with the Aerosoft Airbus, PMDG 777, standard 321 & 737. Do i need to change any settings?