NY Airports v2 X

[DD Stanislaw]

Hi. As far as I know there are such lights at KJFK but I honestly do not remember which runways are equipped with those.

[mmk71]

I've purchased and installed NY Airports 2 recently. Unfortunately, the KTEB AFD file does not contain any ILS data for Rwys 06 and 19. These runways should have the ILS localizer ITEB and ITJL.

I also checked with ILS Inspector, same result. The data is missing. What went wrong and how can I solve this issue ?

Regards, Manuel

[DD Stanislaw]

Hi.
This information appears to be false, since all navaids are correctly assigned in the AFD file.

[mmk71]

This sounds very strange because all my aircrafts cannot capture the ILS frequencies for KTEB. It works perfectly for KJFK and KLGA. But not for KTEB.

I tried a couple of tools to read out the ILS frequencies. Always the same. It works for KJFK and KLGA but not for KTEB. So I definitely think that something is wrong at least with my copy of KTEB_AFD.bgl

Any idea what I can do ?

[DD Stanislaw]

But the airport installed correctly, right? As a first step I would try reinstalling the product.

[mmk71]

Yes, installation is correct except the problem with KTEB AFD. Reinstallation did not change anything.

I also checked that the correct AFD is active, but that's the case. The AFD that has been installed is from July 29th 2017. Maybe there is a newer one I can try ? Or any other suggestions ?

[DD Stanislaw]

Here is the file that should have been installed:
https://www.dropbox.com/s/usq4zwtm0it0c ... D.bgl?dl=1
It definitely contains all navaids.

[mmk71]

This is exacetly the file that has been installed. Needless to say that this file doesn't work either. I have checked this file again with MakeRwys: For the ILS of KTEB you get the following record:

Runway 1 /19 centre: N40:50:53.8064 W074:03:34.8110 9ft
Start 1 : N40:50:20.2458 W074:03:37.2313 9ft Hdg: 3.2T, Length 7014ft
Computed start 1 : Lat 40.838673 Long -74.060375
Offset Threshold primary: 771 feet
Start 19 : N40:51:27.4965 W074:03:32.3037 9ft Hdg: 183.2T, Length 7014ft
Computed start 19 : Lat 40.857883 Long -74.058964
Offset Threshold secondary: 770 feet
Hdg: 3.180 true (MagVar -13.200), Asphalt, 7014 x 141 ft
Secondary ILS ID = ITJL
*** No matching ILS record - assume provided by another layer
*** Runway *** KTEB0010 Lat 40.838673 Long -74.060371 Alt 9 Hdg 16 Len 7014 Wid 141
*** Runway *** KTEB0190 Lat 40.857883 Long -74.058968 Alt 9 Hdg 196 Len 7014 Wid 141
Runway 6 /24 centre: N40:51:07.9951 W074:03:43.9165 9ft
Start 6 : N40:50:48.8500 W074:04:12.0959 9ft Hdg: 48.1T, Length 6009ft
Computed start 6 : Lat 40.846714 Long -74.070306
Start 24 : N40:51:27.3345 W074:03:15.5377 9ft Hdg: 228.1T, Length 6009ft
Computed start 24 : Lat 40.857731 Long -74.054099
Hdg: 48.050 true (MagVar -13.200), Asphalt, 6009 x 141 ft
Primary ILS ID = ITEB
*** No matching ILS record - assume provided by another layer
*** Runway *** KTEB0060 Lat 40.846714 Long -74.070305 Alt 9 Hdg 61 Len 6009 Wid 141
*** Runway *** KTEB0240 Lat 40.857731 Long -74.054100 Alt 9 Hdg 241 Len 6009 Wid 141

You see, there is nothing. And that is what all the other tools and the aircrafts also say. Maybe it's in the file as you showed in your first post but something is probably wrong with this entry.

[Scandinavian]

JFK is missing taxiway EE at the rwy 22R end. Is this something that you guys are going to add?

[DD Stanislaw]

JFK is missing taxiway EE at the rwy 22R end

Got it, thanks for the info.

This is exacetly the file that has been installed. Needless to say that this file doesn't work either. I have checked this file again with MakeRwys

I have honestly no idea why it does not show up in the MakeRwys program. We will investigate that further.

[mmk71]

Thanks. Let me know what the outcome is. RNAV seems to work by the way.

[trisho0]

Found a problem with KJFK rwy04L texture in P3D v4 as viewed in screenshot. Any ideas to fix it?

http://www.fsfiles.org/flightsimshotsv2 ... rwy04L.jpg

[EPS]

Have the missing REIL lights for Runway 29 and Runway 11 at Newark been added yet?

I just installed 2.3 so I'll have to check.

If not I'll modify the AFCAD and add them there... assuming that will work?

Speaking of which at KEWR that default AFCAD with the scenery needs a lot of work on correct gate sizes and airline assignments. I'm gonna modify it correcting airline gate assignments and changing gates at the UAL terminal that should be Medium or Large, currently 90% are oddly categorized as small.

I'll inform when done. Especially For those that use detailed AI. If someone wants to try it out that has great detailed AI, please do and let me know how it looks at EWR, the airlines should park exactly where they are supposed to.

AFCAD will be adjusted according to my own knowledge as a local, satellite imagery for gate confirmation and Port Authority website.

Thanks,
Emil S.

[DD Stanislaw]

Hi.
Please note there there are 3 versions of AFD files - with static AC, without static AC and FSW-dedicated. Each of one needs to be adjusted exactly the same otherwise there will be conflicts. If you have this done, I would be glad to have a look and maybe use it for a future update if you agree.

[truthknown]

Found a problem with KJFK rwy04L texture in P3D v4 as viewed in screenshot. Any ideas to fix it?

http://www.fsfiles.org/flightsimshotsv2 ... rwy04L.jpg

I have the same problem. Any ideas on what could be causing this or a fix?