NY Airports v2 X

[Martin_Starski]

BTW: What other addons do you have? Are you using GSX2?

Maybe another AFCADs are in conflict, which you don't know about. Have you tried to find them in the main P3D root folder?

[jetsetterace]

BTW: What other addons do you have? Are you using GSX2?

Maybe another AFCADs are in conflict, which you don't know about. Have you tried to find them in the main P3D root folder?

FTX Global, FTX Vector, and FTX Open LC North America. I have the demo version of GSX (I think this might include GSX2) installed so I can run FSDreamTeam KIAH, but do not own the full version.

I know for a fact that I do not have any other AFCADs for any of the New York airports. Did a search of my P3D root folder, and another drive where I have scenery for other airports installed just to be sure. No other AFCAD/ADE file for an airport anywhere near New York is installed.

[Martin_Starski]

Please only confirm that you tried to reinstall our scenery with admin rights and turned off antivirus?

Can you check and send the logs from SODE? Maybe we will be able to find something here.

If you are trying to run the jetways via Shift+D, is there any message?

[Sgt_Tailor]

I have been having the same issue, reinstalling the airport and deleting the SODE folders does nothing to fix it unfortunately.

[jetsetterace]

Please only confirm that you tried to reinstall our scenery with admin rights and turned off antivirus?

Can you check and send the logs from SODE? Maybe we will be able to find something here.

If you are trying to run the jetways via Shift+D, is there any message?

Installed/reinstalled with admin rights and with antivirus off, to no avail. However, I did notice that not every terminal at the airports has this issue. At JFK, the jetways at Terminals 5, 7, and 8 all have objects connecting them to the terminal building. Terminals 1 and 2 seem to be most severely afflicted with floating gates, as well as a few gates at Terminal 4.

I had a look at my SODE log, and noticed this section that could be a culprit for my missing jetway links. Can't post the entire log as it would take up my character limit:

[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B32'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B33'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B34'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B35'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B37'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B38'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B39'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B40'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B41'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B43'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B45'. Must be 'CustomDesignator;Number'!
[09:33:09.306] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B50'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B52'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B56'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B58'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B59'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate B60'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C61'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C62'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C63'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C67'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C68'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C69'. Must be 'CustomDesignator;Number'!
[09:33:09.307] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C72'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C73'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C76'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C77'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C78'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C79'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C81'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C82'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C83'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C84'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C85'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C87'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C88'. Must be 'CustomDesignator;Number'!
[09:33:09.308] WARN SODE.XML : <Stand> CustomDesignator Attribute invalid format 'Gate C90'. Must be 'CustomDesignator;Number'!

[Martin_Starski]

Ok, once again we need to check this internally - I hope to come back to you soon.

BTW: if you deactivate the SODE files for NY Airports, the jetways are not visible, right?

[jetsetterace]

Ok, once again we need to check this internally - I hope to come back to you soon.

BTW: if you deactivate the SODE files for NY Airports, the jetways are not visible, right?

Thank you Martin. Hope you are able to figure out what the issue is!

To answer your question, no jetways are visible when I deactivate the SODE files for New York airports. Also, I noticed that there is not a file in the XML folder for NY Airports, while the other sceneries I own that utilize SODE have one. Could this be part of the problem?

[Martin_Starski]

Hi, our files should be included in sdx folder, not in XML folder.

Something has disrupted our files and thus we need to figure out where the problem is.

Can you send me your file with SODE logs to my Email marcin@drzewiecki-design.net or attach it here?

[t.aviation]

Hallo,

First of all: I know that this topic has already been featured in this forum, but I paied quite a bit of money and so I am taking the freedom to take advantage of a personal treat of my problem.
But let`s start at the beginning. A couple of days ago, I bought NY Airports v2 X (for FSX) AND New York City X via Aerosoft. I decided to ask this question here, but it`s also concerning NY City X.
I installed everything, all 6 airports and the city and started FSX. A couple of seconds later, I got a OOM message. After that, I deactivated airport details.- same problem.
Then, I deinstalled New York City X and started FSX again. This time it worked pretty well, but after 2 minutes, again the OOM message.
I have read your manual, about how to handle performance issues, but decreasing the water quality, etc. brought no positive effect and leads to, what a surprise, extremely ugly water textures.
I could try to set all settings to low and deactivate MyTraffic, but to be honest, that`s not the way I want to go, as my computer completely fullfills the minimum system requirements and other sceneries, featuring a lot of buildings with a lot of deatil, like Fly Tampa´s Dubai Rebooted, are working perfectly.
In my oppinion it is annoying that it`s nessecary to set all settings to minimum in order to get it working for at least a few minutes.
I am sure, you designed a wonderfull scenery, but it can`t be that all sceneries on my PC are perfectly working, except yours.
I paied much money, at least for me as a student it is much money, and I don`t want to accept that I paied it for nothing. So just in case it won`t be possible to fix my problem: Is there the possibility to get my money back?
I hope for a helpfull support.

With kind regards
Tom

PC specs:
GPU: NVIDIA GeForce GTX1050 Ti
CPU: Intel Core i5-66010 CPU @ 3.30GHz
RAM: 16GB

[Martin_Starski]

Is there the possibility to get my money back?

Such request should be sent to the store where you have bought the scenery.

Please remember that New York area is very demanding - detailed scenery requires more resources than a less detailed scenery... even if it is optimized as much as possible.

The OOM problem is something that is related to FSX engine, which is 32bit - in P3D v4, which is 64bit, such problem doesn't exist.

Have you installed the scenery with "Lite texture pack"?
What texture resolution is set in your sim? Please share your sim settings.
High AI traffic makes a huge difference too.
Have you also tried to leave only the airports from the package that you want to use - it may be worth deactivating the ones which you are not going to use.
And finally - have you ever modified your fsx.cfg? Some changes may have the influence to such problems.

[t.aviation]

Eve

Such request should be sent to the store where you have bought the scenery.

So if it doesn't work in the end, nobody will pay me my money back... just saying.

Please remember that New York area is very demanding - detailed scenery requires more resources than a less detailed scenery... even if it is optimized as much as possible.

Fly Tampa Dubai Rebooted is also a very detailed scenery and works perfect on my system

The OOM problem is something that is related to FSX engine, which is 32bit - in P3D v4, which is 64bit, such problem doesn't exist.

But why do you offer the product for FSX when it's not working with FSX???

Have you installed the scenery with "Lite texture pack"?
What texture resolution is set in your sim? Please share your sim settings.
High AI traffic makes a huge difference too.
Have you also tried to leave only the airports from the package that you want to use - it may be worth deactivating the ones which you are not going to use.
And finally - have you ever modified your fsx.cfg? Some changes may have the influence to such problems.

I have tried the lite scenery textures without any success. My sim settings are shared in this post. But I will absolutely try how it works with the not needed airports deactivated. Do you know certain modifications for the fsx.cfg?

I hope we will stay in contact about my problem. Thank you for the quick response!

Tom

FSX settings: https://imgur.com/a/Hkn9jDF

[DD Stanislaw]

Hi.

So if it doesn't work in the end, nobody will pay me my money back... just saying.

Our priority is our customers' satisfaction but if you do returns regularly a store might discard such a request (a piracy-related policy). In other case there should not be a problem.

Fly Tampa Dubai Rebooted is also a very detailed scenery and works perfect on my system. / But why do you offer the product for FSX when it's not working with FSX???

Consider the number of airports (in our NY we have 6) as well as the amount of custom buildings (6000+. each has individual textures). There has to be a performance difference but even though performance problems occur rarely.

FSX settings:

Please try the following:
Szenerie -> Radius (...) = Medium
Verkehr -> Fluglinien (...) = 15%
Verkehr -> Schiffe (...) = 0%

Additionally please double-check that both Lite Texture Packs are installed for the city.
As the last step you may limit the amount of NY airports installed only to those which you are planning to use during a flight.

[t.aviation]

I tested a lot of options now...
When I am using the settings you recomended and deactivate NY City X completely and also activate one airport only, I dont get the OOM error.
This solution actually works fine for me. But I am a bit disapointed that I can't use NY city X. But now at least the airports are working and it's not very comlicated to install the airport that is needed before doing a flight.
I would actually love to change to P3D but I would have to rebuy all of my airplane addons.
I will try to get my money back for the NY city X from Aerosoft.
Even though I am happy to use the airports now, it's not a perfect solution and my oppinion is still that you should not release a product for FSX that is not working with FSX. You should have released it for P3D only.
But thank you for the friendly support.

[DD Stanislaw]

you should not release a product for FSX that is not working with FSX. You should have released it for P3D only.

Hi. This is not exactly the case. New York City X has been released in 2013, in 2013 only P3Dv2 was available and it worked exactly as FSX, there were only 32-bit programs on the market. Nevertheless thousands of customers were able to use the product successfully. If you do not believe me, you can check it by yourself f/e on YT:
https://www.youtube.com/results?search_ ... +york+city

[Viggo Edbom]

Hi!

So I have made a lot of testing regarding my issue with the autogen being spawned where it shouldn't be spawned. What I found out was that the payware version has this issue while the DEMO version didn't. I'm suspecting that there is an issue with the afcad file or the KLGA_LIB file. I loaded the afcads from the payware & the DEMO version, but they looked the same. The LIB file couldn't be loaded into ADE due to not being an afcad file, so I'm not really sure if that's the core to this problem. I still replaced the afcad of the payware version with the afcad of the DEMO one hoping that the problem would be solved, but the airport buildings wouldn't load. I'm out of ideas by now.
Screenshot:
https://imgur.com/a/gbYAK2G

Regards
Viggo