New York City XP

Latest version: v1.6 (2018)

Post Reply
mikeaday
2-4 posts
2-4 posts
Posts: 2
Joined: Sunday 29 Jan 2017, 00:40
Location: Mesquite, Texas

Post by mikeaday »

The floating object problem has already been previously posted under your section dealing with your New York City scenery. It is not a new problem. Several comments were posted dealing with the issue. I am just one of many. Doesn't matter now since I have removed your scenery and replaced it with freeware. Your solution was to wait on the X-Plane developers to fix it. That won't be happening. Another $36.00 wasted unless I can revert to an earlier version of X-Plane.

[ Added: Mon Feb 13, 2017 19:33 ]
Here is a link to the scenery problem: http://drzewiecki-design.net/forum/viewtopic.php?p=8004
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

This scenery is designed to be viewed at a normal flying altitude, not from the ground level in the middle of the Manhattan. There are 6500+ custom buildings and it is possible that some 5% of those are floating. Obviously you won't have this problem with 100 buildings or in an autogen-only scenery.
mikeaday wrote:Another $36.00 wasted unless I can revert to an earlier version of X-Plane.
What do you mean by the earlier version of XP?
Image
billmi40
0-1 posts
0-1 posts
Posts: 1
Joined: Tuesday 10 Jan 2017, 20:13
Location: usa

Post by billmi40 »

how do i unistall new york city and airports scenery? i am gettin g 10 fps in xplane 11 very disappointed
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Simply remove all product's folders from Custom Scenery and the scenery_packs.ini file from the same location.
Image
olafsc
0-1 posts
0-1 posts
Posts: 1
Joined: Saturday 08 Apr 2017, 21:25
Location: Germany

Helipads issues and Reflection issues

Post by olafsc »

Hi,

wonderful scenery, two small issues: I use the scenery primarily to fly Helicopter.

- many helipads are in bad shape, except your high detailed ones, I suggest you Access all through the map, check them and fix them (under Buildings, under roads, misshaped, trees on helipad autogenerated etc).

- the reflections on the Buildings look really bad, as they update too slow (980 TI in most current PC Setup otherwise).
Is there a way to turn just the reflections on Buildings off?

thanks,
Olaf

[ Added: Tue Apr 11, 2017 19:22 ]
A few more Bugs like flying Buildings (not sure if you Need a specific mesh over what the package contains?), road going into the river and helipads in water or under Buildings examples:

https://www.dropbox.com/pri/get/NewYork ... FyfBnUiq0w
salajander
5-12 posts
5-12 posts
Posts: 7
Joined: Tuesday 10 Jan 2017, 03:19
Location: Jersey City, USA

Post by salajander »

Hello!

I'm wondering about compatibility with Ortho4XP?

I've generated ortho tiles for the whole northeast US region, but I've found some areas (notably in Central NJ) where it seems the default terrain textures are showing. If I disable DD NYC scenery, the orthophoto textures re-appear.

Is there a known incompatibility with Ortho4XP and the DD NYC scenery? Is there a method I can use to get the best of both?

Both screen caps below were taken about 7800 feet directly above the threshold of rwy 42 at Solberg Hunterdon Airport (N51), with a heading of 42 degrees.

With DD NYC installed:
https://lh3.googleusercontent.com/flhUC ... 96-h873-no

With DD NYC disbled:
https://lh3.googleusercontent.com/DudIH ... 0-h1200-no
Andryl
0-1 posts
0-1 posts
Posts: 1
Joined: Tuesday 18 Apr 2017, 09:13
Location: Italy

Post by Andryl »

Hi there,
I've just bought this excepional add-on, but I've encountered a weird problem:

some buildings looks as they should, like these:
http://i.imgur.com/bkI6gGj.png

but others are completely distorted ad covered with very low quality textures. Here some examples:
http://i.imgur.com/69juFQi.png
http://i.imgur.com/B2OxmoJ.png
http://i.imgur.com/q1tGIUu.png
http://i.imgur.com/ldg8g6U.png
http://i.imgur.com/s2oOUih.png

I've correctly installed the add-on and I didn't see any related error in x-plane log file.
In the manual there are no instructions about how to change texture resolution, so I'm a bit lost :(
Any clue or advice?

Thanks in advance.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Hello.
The product should look exactly as on promo screenshots/movies: http://www.drzewiecki-design.net/prodNYCity_XP.htm . The product is designed for normal aerial operations on flight routes and proper altitudes, like this: http://www.drzewiecki-design.net/images ... Cxp_05.jpg . It is not designed for extreme close-ups and flying between the buildings. For example try the Hudson River route at 1000ft agl.
Image
salajander
5-12 posts
5-12 posts
Posts: 7
Joined: Tuesday 10 Jan 2017, 03:19
Location: Jersey City, USA

Post by salajander »

Hey there,

Any ideas about my Ortho4XP problem a few posts back?

Thanks!
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Hi.
I do not see your post. Please remind of the problem.
Image
salajander
5-12 posts
5-12 posts
Posts: 7
Joined: Tuesday 10 Jan 2017, 03:19
Location: Jersey City, USA

Post by salajander »

It's just a few posts up. Here it is again:
salajander wrote:Hello!

I'm wondering about compatibility with Ortho4XP?

I've generated ortho tiles for the whole northeast US region, but I've found some areas (notably in Central NJ) where it seems the default terrain textures are showing. If I disable DD NYC scenery, the orthophoto textures re-appear.

Is there a known incompatibility with Ortho4XP and the DD NYC scenery? Is there a method I can use to get the best of both?

Both screen caps below were taken about 7800 feet directly above the threshold of rwy 42 at Solberg Hunterdon Airport (N51), with a heading of 42 degrees.

With DD NYC installed:
https://lh3.googleusercontent.com/flhUC ... 96-h873-no

With DD NYC disbled:
https://lh3.googleusercontent.com/DudIH ... 0-h1200-no
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Got it, thanks.
[edit] You will get a reply to this possibly in a few days, probably next week. This requires some tweaking of the product but can be done.
Image
salajander
5-12 posts
5-12 posts
Posts: 7
Joined: Tuesday 10 Jan 2017, 03:19
Location: Jersey City, USA

Post by salajander »

Great, thank you.
Elite Aviator
2-4 posts
2-4 posts
Posts: 3
Joined: Wednesday 19 Apr 2017, 21:40
Location: U.S.

Help

Post by Elite Aviator »

Greetings all. I know that im probably posting this in the wrong place but Ive been trying to get a hold of someone who can help me regarding New York Airports. I dont thing im able to make a new post so I only can reply to discussions. My LGA airport is acting up and im out of options. Someome please help. Thanks and sorry for posting this in wrong location.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6259
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Hello Ron. There is a dedicated topic for NY Airports XP product. Please describe your problem there. This topic is for another product.

Clay, the vendor promised to provide the newest version of the product to Customers as soon as possible and confirmed, that they received the newest version in December 2016 but failed to upload it due to their mistake.
Image
Post Reply