Washington X
Latest version: v1.5 (2020)
-
- 2-4 posts
- Posts: 4
- Joined: Saturday 18 Feb 2017, 15:05
- Location: Philadelphia, PA
Dziêkujê Stanislaw, they work perfecly now. Paolo, to get GSX to recognize them you have to tell GSX a jetway is available through the customize airport menu. Once you do that, restart the SODE and COATL modules and the jetways should work through the GSX "operate jetway" command.Fardel wrote:Hi,
Yhank you now I have the jetways but not animated and never GSX recognizes any jetways.
Paolo
Edit:
I have just received the update warning from Simmarket but there is the ver. 1.0 jet
Thank you I will tryFlyboy0284 wrote:Dziêkujê Stanislaw, they work perfecly now. Paolo, to get GSX to recognize them you have to tell GSX a jetway is available through the customize airport menu. Once you do that, restart the SODE and COATL modules and the jetways should work through the GSX "operate jetway" command.Fardel wrote:Hi,
Yhank you now I have the jetways but not animated and never GSX recognizes any jetways.
Paolo
Edit:
I have just received the update warning from Simmarket but there is the ver. 1.0 jet
[ Added: Sun Feb 19, 2017 18:33 ]
Now all works.
Stanislaw please check if on Simmarket is loaded the version 1.01
Thank you for all
Paolo
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Is it just me or this scenery could use some VAS optimization? There are some VAS spike. I was doing the flight from PHX to DCA with only DCA and PHX check with latest Nvidia driver and FSL. I was having 88% of VAS and then during final for the ILS rwy 1, it jumped up to 94 for a good minute or two then back to 85% and same when i'm on the ground. it's up and down and unpredictable for the most part.
If you need more information, please let me know.
If you need more information, please let me know.
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
GHP, this might be relatel to LOD models being loaded. Hard to do anything with that - objects need to be loaded at some point, although most customers are reporting a very good performance of the product. Please try the Lite Texture Pack too.
PGDE, you can remove all static aircraft using the installer and switch to AI traffic for example.
PGDE, you can remove all static aircraft using the installer and switch to AI traffic for example.
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland