Moscow City X
Latest version: v1.6 (2020)
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi.
Well, I believe that the GSX designers should solve that issue. We are using a standard AFD file, there is nothing "strange" about that file so GSX should also work fine with it. You can also check that you are using the latest update of the GSX as some older versions did not support our products.
Well, I believe that the GSX designers should solve that issue. We are using a standard AFD file, there is nothing "strange" about that file so GSX should also work fine with it. You can also check that you are using the latest update of the GSX as some older versions did not support our products.
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: 1.25
It could happen f/e because no much content was introduced in v1.25 in comparison to f/e v1.2 (I do not remember now, it was long time ago as Marek said).IgorMos wrote:I had no notification e-mail from them.
Moscow City X elivation issue
Hi All,
I have searched and searched on the internet about this issue, but I decided to come here to try to get it sorted. I have issues with the Moscow City X scenery.
The only scenery conflictions I could possibly have are with ORBX FTX Global and FTX Vector. I have ran the Vector config tool dozens of times and tried tweaking my scenery library as well, elivation issues are not new to me but this one I just can't crack, I have also tried running through suggestions earlier in this thread.
https://ibb.co/c0zuKm
https://ibb.co/j3pGX6
https://ibb.co/b1Q1zm
https://ibb.co/mTybX6
I have searched and searched on the internet about this issue, but I decided to come here to try to get it sorted. I have issues with the Moscow City X scenery.
The only scenery conflictions I could possibly have are with ORBX FTX Global and FTX Vector. I have ran the Vector config tool dozens of times and tried tweaking my scenery library as well, elivation issues are not new to me but this one I just can't crack, I have also tried running through suggestions earlier in this thread.
https://ibb.co/c0zuKm
https://ibb.co/j3pGX6
https://ibb.co/b1Q1zm
https://ibb.co/mTybX6
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi.
Go to FS\Scenery\EURE\scenery . There is a file called moscow.bgl which should have been disabled during install. Change its name to moscow.off or move to any inactive folder.
Regarding FTX Vector - you need to manually enter all ICAO codes that you want to disable. It does not seem to work automatically (at least sometimes).
Go to FS\Scenery\EURE\scenery . There is a file called moscow.bgl which should have been disabled during install. Change its name to moscow.off or move to any inactive folder.
Regarding FTX Vector - you need to manually enter all ICAO codes that you want to disable. It does not seem to work automatically (at least sometimes).
Hi Stanislaw,
Thanks for your reply, I made the change to the moscow.bgl file in the EURE folder and also manually disabled the moscow region airports in FTX config tool.
This is the result, the huge elivation issue has mostly been corrected except for one of the smaller airports in the region, and there seem to be some minor buildings in the center of the city that go into the river as seen below, these arn't huge deals for me as I will mainly be flying into the larger airports but still thought I would update the thread. Also one of the airports has a runway duplication thing happening. Thanks for your help
https://ibb.co/hPgKn6
https://ibb.co/iG9TfR
https://ibb.co/gbR8fR
https://ibb.co/nxvJfR
Thanks for your reply, I made the change to the moscow.bgl file in the EURE folder and also manually disabled the moscow region airports in FTX config tool.
This is the result, the huge elivation issue has mostly been corrected except for one of the smaller airports in the region, and there seem to be some minor buildings in the center of the city that go into the river as seen below, these arn't huge deals for me as I will mainly be flying into the larger airports but still thought I would update the thread. Also one of the airports has a runway duplication thing happening. Thanks for your help
https://ibb.co/hPgKn6
https://ibb.co/iG9TfR
https://ibb.co/gbR8fR
https://ibb.co/nxvJfR
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi Peter.
So from the extra software you use only Global and Vector, is that correct? Is our product on the top of the Scenery Library list? Did you try to simply remove it and make a reinstall? Anyway, I will look into the issues you've mentioned. Thank you for providing the screenshots.
[edit] OK, I was able to replicate this issue. Working on the fix.
So from the extra software you use only Global and Vector, is that correct? Is our product on the top of the Scenery Library list? Did you try to simply remove it and make a reinstall? Anyway, I will look into the issues you've mentioned. Thank you for providing the screenshots.
[edit] OK, I was able to replicate this issue. Working on the fix.
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
A new version of UUEE Moscow Sheremetyevo X v1.3 has been sent to stores. Customers will be notified when the update is available at the store you used to purchase the product. You simply need to log-in and download the newest version. It is not required to uninstall the previous one. The update is free.
• Seasons now match those in the simulator and in the UUEE Moscow Sheremetyevo X product
• GSX compatibility improved
• FSW compatibility added
• UUWW autogen fixes
• Upgraded installer script
• Seasons now match those in the simulator and in the UUEE Moscow Sheremetyevo X product
• GSX compatibility improved
• FSW compatibility added
• UUWW autogen fixes
• Upgraded installer script
Just to give you some feedback on your new update of 1.3
After installing and tweaking the FTX Vector configuration the scenery elivation issues seem to have been fixed!!!!!
Thank you for your help. I am super happy that you persisted in fixing the product. Here are some happy screenshots from me.
https://ibb.co/jtV2S6
https://ibb.co/bMGnum
https://ibb.co/iPBnum
After installing and tweaking the FTX Vector configuration the scenery elivation issues seem to have been fixed!!!!!
Thank you for your help. I am super happy that you persisted in fixing the product. Here are some happy screenshots from me.
https://ibb.co/jtV2S6
https://ibb.co/bMGnum
https://ibb.co/iPBnum
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
How to correctly uninstall and then update to v1.3 (P3D 4.1)
Hello, Stanislav.
Can You tell Me please, how correctly to uninstall the previous version of Moscow City and Sheremetyevo before updating to current v1.3?
I didn't find any uninstaller or uninstall function inside the installer.
Do I need first of all manually delete Moscow and Sheremetyevo entries using Prepar 3D world scenery tab and then manually delete Folders inside Addon Scenery and delete sections in C:\Users\.......\Documents\Prepar3D v4 Add-ons?
Or There is a simple way to update to current V1.3 version?
The products were purchased from Simmarket and current updates were downloaded from there
Thanks a lot
Merry Christmas
Can You tell Me please, how correctly to uninstall the previous version of Moscow City and Sheremetyevo before updating to current v1.3?
I didn't find any uninstaller or uninstall function inside the installer.
Do I need first of all manually delete Moscow and Sheremetyevo entries using Prepar 3D world scenery tab and then manually delete Folders inside Addon Scenery and delete sections in C:\Users\.......\Documents\Prepar3D v4 Add-ons?
Or There is a simple way to update to current V1.3 version?
The products were purchased from Simmarket and current updates were downloaded from there
Thanks a lot
Merry Christmas
- Martin_Starski
- 200+ posts
- Posts: 3405
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Hello,
Firstly it's mentioned by Stanislaw that:
Your way of thinking seems to be right - please delete Moscow and UUEE Sheremetyevo entries from C:\Users\.......\Documents\Prepar3D v4 Add-ons and then delete Moscow nad UUEE Sheremetyevo folders from Addon Scenery. You may also delete the appropriate files from SODE folder C:\ProgramData\12bPilot\SODE - and voilà
Before making the new installation I suggest loading Prepar3d to rebuild all files and then close it.
Firstly it's mentioned by Stanislaw that:
The uninstaller is not provided.It is not required to uninstall the previous one
Your way of thinking seems to be right - please delete Moscow and UUEE Sheremetyevo entries from C:\Users\.......\Documents\Prepar3D v4 Add-ons and then delete Moscow nad UUEE Sheremetyevo folders from Addon Scenery. You may also delete the appropriate files from SODE folder C:\ProgramData\12bPilot\SODE - and voilà
Before making the new installation I suggest loading Prepar3d to rebuild all files and then close it.
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: How to correctly uninstall and then update to v1.3 (P3D
Hey.Nemmo wrote:Hello, Stanislav.
Can You tell Me please, how correctly to uninstall the previous version of Moscow City and Sheremetyevo before updating to current v1.3?
The answer is 4 posts above, written in red.
Merry Christmas!