EETN Tallinn v2 XP

Latest version: v2.05 (2018)

Post Reply
User avatar
DD Stanislaw

Administrator
Posts: 4179
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw » Monday 12 Feb 2018, 14:29

A, rozumiem.
Update do nowej wersji będzie kosztować 50% dla użytkowników starej, a więc:
Ze starą: 14.5 eur + (25eur / 2) = 14.5 + 12.5 = 27eur
Tylko nowa: 25eur

Sugeruję zatem poczekać na nową, choć różnica będzie niewielka.
Image

Mrsogmor

0-1 posts
Posts: 1
Joined: Wednesday 01 Aug 2018, 12:17
Name: Mike

Re: EETN Tallinn v2 XP

Post by Mrsogmor » Wednesday 01 Aug 2018, 12:27

I am enjoying the Tallinn airport very much.I flew into to Tallinn on a Baltic air Dash last december and thought I would like this configuartion to learn X-plane so I bought the X-plane 11 FlyJSim Dash 8 Q400 XP11 and your EETN Tallinn Airport v2 XP with both of which I was very pleased.All was working well until I updated X-plane steam on 30.07.18 and now the pushback doesn't work on X-plane 11 FlyJSim Dash 8 Q400 XP11and i can't select any other start point iother than the gate so I can't get the aircraft off the stand.I wait and wait and the pushback never comes.It was all working well before the update.I'm a complete beginner so is this a rather niaeve question :shock: .Should I suspect the Aircraft, Xplane or the EETN Tallinn Airport? Also I only have one option to start at the gate which is probably where I started the last flight beofre the Xplane was updated.There is no option to choose runway as I could previously and also I could choose to start on a 10 mile approach to either runway and this is no longer available!? Any advice is very welcome.

Cheers michael

User avatar
DD Stanislaw

Administrator
Posts: 4179
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Re: EETN Tallinn v2 XP

Post by DD Stanislaw » Wednesday 01 Aug 2018, 13:59

Hi.
After each update you need to remove the scenery_packs.ini to correctly reorder all sceneries (or reinstall our scenery).
Image

Post Reply