Chicago Airports X
Latest version: v1.4 (2020)
-
- 0-1 posts
- Posts: 1
- Joined: Saturday 08 Feb 2020, 05:45
- Name: Scott
Re: Chicago Airports X
I need technical support! Who do I contact?
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Chicago Airports X
Hi,
For performance reasons I deselected airport details at KORD when installing however all taxi signs disappear. I do not miss the small details such as moving vehicles etc however the taxi signs are important. Is there a file that can be activated which allows the taxi signs to load even when airport details are not selected during the installation?
Thanks
For performance reasons I deselected airport details at KORD when installing however all taxi signs disappear. I do not miss the small details such as moving vehicles etc however the taxi signs are important. Is there a file that can be activated which allows the taxi signs to load even when airport details are not selected during the installation?
Thanks
- Martin_Starski
- 200+ posts
- Posts: 3428
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Hi, It has to be checked. Can you please post the screenshot including your selected options in the installer? When you reinstall the scenery with marked "airport details", taxi signs are visible again, right?
Re: Chicago Airports X
I thought that may be the case, yes taxi signs are visible when the selection is checked so I will reinstall and enable airport details.
Thanks
Thanks
Re: Chicago Airports X
Hello,
I recently bought Chicago X, and installed it under FSX and P3D. I noticed that the installation created an ORBX folder in both simulators. Now, I do not have any ORBX products, so can I safely remove that folder?
Thanks -
Jorgen
I recently bought Chicago X, and installed it under FSX and P3D. I noticed that the installation created an ORBX folder in both simulators. Now, I do not have any ORBX products, so can I safely remove that folder?
Thanks -
Jorgen
- Martin_Starski
- 200+ posts
- Posts: 3428
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Probably it's caused by the fact that our installer wanted to adapt the ORBX scenery in your sim. You can remove it or leave it.
Re: Chicago Airports X
I am having an issue with the bridge on taxiway B. The aircraft falls straight through and cannot be recovered. This is with the FSLabs A321. Mesh is set at 1m.
-
- 13-25 posts
- Posts: 16
- Joined: Thursday 20 Jun 2019, 01:39
- Name: Doug
- Location: KMKE
Re: Chicago Airports X
Hello
Runways 9R and 10L - it appears the runway coordinates are inaccurate - when departing either runway, RAAS will say on taxiway and then about half way down the runway, RAAS will announce correct runway. I've updated to makerunways to 4.891 but the callout is still the same ...any thoughts?? Thx Doug
Runways 9R and 10L - it appears the runway coordinates are inaccurate - when departing either runway, RAAS will say on taxiway and then about half way down the runway, RAAS will announce correct runway. I've updated to makerunways to 4.891 but the callout is still the same ...any thoughts?? Thx Doug
- Martin_Starski
- 200+ posts
- Posts: 3428
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
My suggestion would be to contact the authors of the software which has the issue. Our products are built according to P3Dv4 SDK and we do not have any idea what that RAAS software might search for in i.a. AFCAD files to display correct data.
-
- 2-4 posts
- Posts: 4
- Joined: Saturday 04 Mar 2017, 19:20
- Location: Chicago, IL
Re: Chicago Airports X
I am missing taxiway and runway markings at least at MDW. I've had Chicago Airports since nearly release (and updated to 1.2 along the way), but am only just getting back in to flight sim and noticing this. Any thoughts as to what I could do to fix this? I do have Orbx KCGX and FSDT ORD v2 installed as well, but I'm not sure I'd expect these to interfere.
- Martin_Starski
- 200+ posts
- Posts: 3428
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Do you mean signs? Horizontal or vertical markings? Can you post the screenshot to show how does it look like?ESzczesniak wrote: ↑Monday 23 Mar 2020, 21:53 I am missing taxiway and runway markings at least at MDW.
-
- 2-4 posts
- Posts: 3
- Joined: Saturday 04 Apr 2020, 17:01
- Name: Archie
Re: Chicago Airports X
Hi,
Is there any way to remove static aircraft from the Demo version of the product?
Thanks,
Archie.
Is there any way to remove static aircraft from the Demo version of the product?
Thanks,
Archie.
- Martin_Starski
- 200+ posts
- Posts: 3428
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
In our full version such option can be choosed during the installation process. In case of demo you may try to deactivate / remove the respective bgl file in the scenery folder (in its name there is a word "static").
-
- 2-4 posts
- Posts: 3
- Joined: Saturday 04 Apr 2020, 17:01
- Name: Archie
Re: Chicago Airports X
Hi,
Thanks for the reply. I have several files with 'Stat' in - KMDW_JWStat_PLC.bgl, KMDW_STAT_LIB.bgl, KORD_STAT_PLC.bgl, KORD_STAT_LIB.bgl, KORD_JWStat_PLC.bgl, KORD_JWStat_PLC.bgl, KMDW_STAT_PLC.bgl, KPWK_STAT_PLC.bgl and KPWK_STAT_LIB.bgl. I have just one that has 'static' in - KORD_JWStatic.bgl. Do I delete just the KORD_JWStatic.bgl or all the files with 'Stat' or 'static' in?:)
Thanks,
Archie.
Thanks for the reply. I have several files with 'Stat' in - KMDW_JWStat_PLC.bgl, KMDW_STAT_LIB.bgl, KORD_STAT_PLC.bgl, KORD_STAT_LIB.bgl, KORD_JWStat_PLC.bgl, KORD_JWStat_PLC.bgl, KMDW_STAT_PLC.bgl, KPWK_STAT_PLC.bgl and KPWK_STAT_LIB.bgl. I have just one that has 'static' in - KORD_JWStatic.bgl. Do I delete just the KORD_JWStatic.bgl or all the files with 'Stat' or 'static' in?:)
Thanks,
Archie.