NY Airports v2 X
Latest version: v2.6 (2020)
Re: NY Airports v2 X
That makes total sense, I'll mess around with some things and see what I come up with, thank you so much.
-
- 5-12 posts
- Posts: 9
- Joined: Monday 01 Jun 2020, 10:10
- Name: Bob
Re: NY Airports v2 X
Hi I have these content errors:
[error.156]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH\aircraft.cfg
Section:Flaps.0
Key:system_type
[error.157]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_LANDED\aircraft.cfg
Section:contact_points
Key:max_number_of_points
[error.158]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_LANDING\aircraft.cfg
Section:contact_points
Key:max_number_of_points
[error.159]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_WAT\aircraft.cfg
Section:contact_points
Key:max_number_of_points
[error.156]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH\aircraft.cfg
Section:Flaps.0
Key:system_type
[error.157]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_LANDED\aircraft.cfg
Section:contact_points
Key:max_number_of_points
[error.158]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_LANDING\aircraft.cfg
Section:contact_points
Key:max_number_of_points
[error.159]
error=Found Duplicate Key Name
File:E:\Prepar3D Addons\DrzewieckiDesign\SimObjects\Misc\RDJ_EXTREME_AL_2X_JETCRASH_WAT\aircraft.cfg
Section:contact_points
Key:max_number_of_points
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Can you let me know where such content errors are being generated? As far as I heard - it was relating to the special mission that was the part of this scenery.
Despite these errors, do you see any problems in the sceneries?
Despite these errors, do you see any problems in the sceneries?
-
- 5-12 posts
- Posts: 9
- Joined: Monday 01 Jun 2020, 10:10
- Name: Bob
Re: NY Airports v2 X
If you enable content error logging in P3D it will output a textfile contenterrors after closing of the sim.Martin_Starski wrote: ↑Wednesday 03 Jun 2020, 17:24 Can you let me know where such content errors are being generated? As far as I heard - it was relating to the special mission that was the part of this scenery.
Despite these errors, do you see any problems in the sceneries?
I haven't flown the scenario, I'm just try to get rid of errors.
For that files it is an easy fix.
remove the second line "max_number_of_points=21"
remove the second line "system_type=1"
Re: NY Airports v2 X
I am having issue getting KTEB (from the NYC Airports v2) to load up in p3dv4.5 and 5.1....What I get is the generic crappy p3d default fsx airport with sunken elevation and black asphalt with 2 planes.....If I use Super traffic Board and i click on an aircraft to see it taxi, etc..I can see the scenery.
Any help apprecioated,
BobM.
https://imgur.com/18qV5x7
https://imgur.com/x1OWdcI
Any help apprecioated,
BobM.
https://imgur.com/18qV5x7
https://imgur.com/x1OWdcI
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Super Traffic Board is an AI traffic Board that shows ai's...http://www.supertrafficboard.com/been out for years..anyway..
OS=Windows 10
Date=06/04/2020
Time=15:38:51
[PRODUCT]
Product Name=NY Airports v2 X
Product Version=: KJFK, KLGA, KTEB v2.5
Product path=S:\Addon Scenery\NY Airports v2 X
addonXMLpath=C:\Users\CAROLINAP3DSERVER\Documents\Prepar3D v5 Add-ons\NY Airports v2 X\add-on.xml
[FLIGHTSIM]
Sim main Folder=S:
Sim Selection=611
CFG file path=%simcfgpath%
add-on.cfg folder path=%add-ons.cfg%
scenery.cfg path=C:\ProgramData\Lockheed Martin\Prepar3D v5\scenery.cfg
[SODE]
SODE files=C:\ProgramData\12bPilot\SODE
BTW..I haven't seen of your sode xml's for 12bPilot/SODE/xml folder? where are they?
I have disabled FSDreamteam.. I finally after messing around for hours got NY Airports KTEB to show up in p3dv4.5 hf3 but LM P3dv5.1 HF1 have changed something..read this post:
I'm certainly no guru and don't know the particulars on it but V5 has that weird need to have excludes added to previous p3d version ade's. Luckily ADE does this on its own now when you load stock data. What I have found however is that I also delete the freshly imported scenery objects and taxi signs, leaving behind the micro excludes. Seems to work fine so far with about 80 ADE's that I've moved over from V4....
Have you done anything with the sceneries to bring it up to v5 or simply added an installer and left the rest to us to figure out?
Thank you for any assistance. I really don't like messing around with ADE cause I know nothing...lol
Very Best to you all..
Bob Morehead
2089011 DRZEWIECKI DESIGN - NY AIRPORTS V2 X : KJFK, KLGA, KTEB FSX P3D (Simmarket order) and have Seattle and UUEE
https://imgur.com/WsjgOUT Scenery Order
OS=Windows 10
Date=06/04/2020
Time=15:38:51
[PRODUCT]
Product Name=NY Airports v2 X
Product Version=: KJFK, KLGA, KTEB v2.5
Product path=S:\Addon Scenery\NY Airports v2 X
addonXMLpath=C:\Users\CAROLINAP3DSERVER\Documents\Prepar3D v5 Add-ons\NY Airports v2 X\add-on.xml
[FLIGHTSIM]
Sim main Folder=S:
Sim Selection=611
CFG file path=%simcfgpath%
add-on.cfg folder path=%add-ons.cfg%
scenery.cfg path=C:\ProgramData\Lockheed Martin\Prepar3D v5\scenery.cfg
[SODE]
SODE files=C:\ProgramData\12bPilot\SODE
BTW..I haven't seen of your sode xml's for 12bPilot/SODE/xml folder? where are they?
I have disabled FSDreamteam.. I finally after messing around for hours got NY Airports KTEB to show up in p3dv4.5 hf3 but LM P3dv5.1 HF1 have changed something..read this post:
I'm certainly no guru and don't know the particulars on it but V5 has that weird need to have excludes added to previous p3d version ade's. Luckily ADE does this on its own now when you load stock data. What I have found however is that I also delete the freshly imported scenery objects and taxi signs, leaving behind the micro excludes. Seems to work fine so far with about 80 ADE's that I've moved over from V4....
Have you done anything with the sceneries to bring it up to v5 or simply added an installer and left the rest to us to figure out?
Thank you for any assistance. I really don't like messing around with ADE cause I know nothing...lol
Very Best to you all..
Bob Morehead
2089011 DRZEWIECKI DESIGN - NY AIRPORTS V2 X : KJFK, KLGA, KTEB FSX P3D (Simmarket order) and have Seattle and UUEE
https://imgur.com/WsjgOUT Scenery Order
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
So, you have the last version - good to know.
We do not use xml - only sdx files should be exported to the respective SODE folder.
Should I understand that everything seems to be ok with KTEB already? It can be that FSDT is excluding something, but in such case you need to ask FSDT to provide compatibility.
We checked all our sceneries to provide the compatibility with P3D v5, so this was not only the installer but everything which wasn't working fine in v5, for example lighting. But there are no visual changes - only compatibility issues were solved.
Re: NY Airports v2 X
Thank you for your help
BobM.
BobM.
Re: NY Airports v2 X
Hi,
I just installed the program along with the SODE program. I went to start up FSX steam and when i loaded KEWR it still showed default scenery with jetways spread out in random areas of the airport. any suggestions?
I just installed the program along with the SODE program. I went to start up FSX steam and when i loaded KEWR it still showed default scenery with jetways spread out in random areas of the airport. any suggestions?
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Which sim have you choosed during the installation process?
Please bear in mind that FSX Steam should be choosed for Dual Mode only - otherwise you need to choose Microsoft Flight Simulator X as your sim in the installer.
Secondly - please remember to run the installer with admin rights.
Please bear in mind that FSX Steam should be choosed for Dual Mode only - otherwise you need to choose Microsoft Flight Simulator X as your sim in the installer.
Secondly - please remember to run the installer with admin rights.
Re: NY Airports v2 X ILS 4L & 4R Issues
Hello,
When i am on approach at JFK runways 4L or 4R, the moment the aircraft "grabs" the localizer, it turns the aircraft in the complete opposite direction of the runways.
Has anyone had this same issue.
Please let me know if you all need any pictures and if so, of what exactly.
Much appricatied,
Gabe.
When i am on approach at JFK runways 4L or 4R, the moment the aircraft "grabs" the localizer, it turns the aircraft in the complete opposite direction of the runways.
Has anyone had this same issue.
Please let me know if you all need any pictures and if so, of what exactly.
Much appricatied,
Gabe.
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Which sim are we talking about? Do you have the last version of the scenery? Have you tried to reinstall it with admin rights?
You need to know that there is a problem with airport navaid database in FSX / P3D, because is hopelessly out of date. However there is a donationware update for navaids and ILS data here:
http://www.aero.sors.fr/navaids3.html
which maybe help you to solve the problem in your case.
There is also a more elaborate payware version - fsaerodata.
Either of these will match up the ILS frequencies to the latest AIRAC release.
BTW: As far as I remember, FS default airports / navaids have their LOC back courses enabled. In addition, if the same LOC frequency is shared at both ends of the runway in FS you will receive the incorrect one until about within two degrees of center-line. This also results in a false GS if present. You need to pay attention to the LOC ID on the PFD before engaging VOR/LOC and APP.
You need to know that there is a problem with airport navaid database in FSX / P3D, because is hopelessly out of date. However there is a donationware update for navaids and ILS data here:
http://www.aero.sors.fr/navaids3.html
which maybe help you to solve the problem in your case.
There is also a more elaborate payware version - fsaerodata.
Either of these will match up the ILS frequencies to the latest AIRAC release.
BTW: As far as I remember, FS default airports / navaids have their LOC back courses enabled. In addition, if the same LOC frequency is shared at both ends of the runway in FS you will receive the incorrect one until about within two degrees of center-line. This also results in a false GS if present. You need to pay attention to the LOC ID on the PFD before engaging VOR/LOC and APP.
Re: NY Airports v2 X
Ill check it out. Thank you!!