Please check few post above on the same page: http://drzewiecki-design.net/forum/view ... 435#p20320
Chicago Airports X
Latest version: v1.4 (2020)
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Re: Chicago Airports X
The above-attached file did not fix the runway lights issue for me, but I suspect I didn't install it correctly? Inside C:\ProgramData\12bPilot\SODE there was no sdx folder, so I created one, with the folder DrzewieckiDesign underneath, and extracted the above-attached file into it. Nothing changed. So what did I do wrong?
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
It seems that your installation was wrong indeed.
What folders / data do you have in C:\ProgramData\12bPilot\SODE?
SODE is working good with others sceneries?
Maybe our installer was not able to copy the respective files to SODE folder - have you run the installer with admin rights?
What folders / data do you have in C:\ProgramData\12bPilot\SODE?
SODE is working good with others sceneries?
Maybe our installer was not able to copy the respective files to SODE folder - have you run the installer with admin rights?
Re: Chicago Airports X
Yeah, I had been uninstalling and reinstalling SODE as I was discussing the runway lights issue with the SODE developer. Reinstalled Chicago Airports and now the folder is there. Thanks.
-
- 2-4 posts
- Posts: 4
- Joined: Sunday 26 May 2019, 01:14
- Name: Bill
Re: Chicago Airports X
Hi I was wondering I have 3 major city x.. Washington X, Chicago X, and New York X City.. Is there a config file stand alone that I am either missing finding, if so where does it put it which file does it normally put it with ? Cause as I've right now the only config I see you have to take the scenery off and put it back on again just to get those selections you get in the beginning.. Most scenery places been having a config place you can go too in order adjust scenery accordingly so it don't hit your fps so hard by unwanted items.. If not already implemented be nice to have with these sceneries as well.. To have a stand alone config file that comes with it and drops in either primary folder with the scenery or one of the ones that go to C:/users/ yourname/ where that file may go..
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Chicago Airports X
Bill, you simply run the installer of a particular product. This also helps to keep all of them up-to-date.
Re: Chicago Airports X
Anyone else had this issue after installing blackmarble?
This is KORD and only have this issue at my installed DD airports
This is KORD and only have this issue at my installed DD airports
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
From our side we can only say that we have never tested our products with this addon, so probably you need to contact with the author of add-on that affects our add-on.
-
- 2-4 posts
- Posts: 3
- Joined: Monday 22 Jun 2020, 14:54
- Name: Tony
Re: Chicago Airports X
Hello,
I bought Chicago X City Scenery a few months ago and it worked fine. Recently I availed of the free airports package but every time I try to fly from Midway (I haven't tried O'Hare) I I get repeated warning tones and FSX crashes. I thought SODE was the problem so deactivated (issue remained) then uninstalled it, but the problem persists. I tried disabling the airports in Scenery Library but discovered they are in the same entry as the City. Unless I get a solution then I'll have to uninstall all of Chicago X and reinstall the City and forget about the airports which will be a disappointment. I have no problems with any other addons, either scenery, airports or aircraft.
Are there minimum specifications to run these airports?
My specs are:
Windows 10 Home 64 bit
Processor: 3.60 gigahertz AMD Ryzen 7 3700X 8-Core
Graphics Card: AMD Radeon RX 5700 [Display adapter]
RAM: 16 Gb
FSX with SP1 & SP2
No other USA scenery installed.
Regards,
Tony
I bought Chicago X City Scenery a few months ago and it worked fine. Recently I availed of the free airports package but every time I try to fly from Midway (I haven't tried O'Hare) I I get repeated warning tones and FSX crashes. I thought SODE was the problem so deactivated (issue remained) then uninstalled it, but the problem persists. I tried disabling the airports in Scenery Library but discovered they are in the same entry as the City. Unless I get a solution then I'll have to uninstall all of Chicago X and reinstall the City and forget about the airports which will be a disappointment. I have no problems with any other addons, either scenery, airports or aircraft.
Are there minimum specifications to run these airports?
My specs are:
Windows 10 Home 64 bit
Processor: 3.60 gigahertz AMD Ryzen 7 3700X 8-Core
Graphics Card: AMD Radeon RX 5700 [Display adapter]
RAM: 16 Gb
FSX with SP1 & SP2
No other USA scenery installed.
Regards,
Tony
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
-
- 2-4 posts
- Posts: 3
- Joined: Monday 22 Jun 2020, 14:54
- Name: Tony
Re: Chicago Airports X
Hi,
Thanks for the quick reply. Did you look at my specs? I am considering increasing my RAM - would this help? I assume that to install the Lite Textures I'll have to uninstall the Airports first? My problem with this is that Chicago X does n ot appear in the list of Start Menu Programs nor does it appear in the Uninstall Apps in Windows Settings. Can I just delete the folder with the scenery? I wouldl like to use the higher quality textures hence my question about the specs.Since installing these airports I am also getting FSX crashes on a particular add on aircraft but not in every airport. Does the Chicago X Scenery load into memory even if I'm not flying in the Chicago area - I normally fly in Ireland.
Regards,
Tony
Thanks for the quick reply. Did you look at my specs? I am considering increasing my RAM - would this help? I assume that to install the Lite Textures I'll have to uninstall the Airports first? My problem with this is that Chicago X does n ot appear in the list of Start Menu Programs nor does it appear in the Uninstall Apps in Windows Settings. Can I just delete the folder with the scenery? I wouldl like to use the higher quality textures hence my question about the specs.Since installing these airports I am also getting FSX crashes on a particular add on aircraft but not in every airport. Does the Chicago X Scenery load into memory even if I'm not flying in the Chicago area - I normally fly in Ireland.
Regards,
Tony
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Chicago Airports X
Tony, unfortunately in case of FSX (which is a 32-bit platform) increasing your RAM will not help.
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
No - you can run the installer again and mark the respective options, then install.TonyWaldron wrote: ↑Wednesday 24 Jun 2020, 19:29 I assume that to install the Lite Textures I'll have to uninstall the Airports first?
Firstly you need to remember that It is also very demanding area with a lot of autogen - detailed scenery requires more resources than a less detailed scenery... even if it is optimized as much as possible.TonyWaldron wrote: ↑Wednesday 24 Jun 2020, 19:29 Does the Chicago X Scenery load into memory even if I'm not flying in the Chicago area - I normally fly in Ireland.
The "out of memory" problem is something that is related to FSX engine, which is 32bit - in P3D v4 or P3D v5, which are 64bit, such problem shouldn't exist.
High AI traffic makes a huge difference too, so you may reduce it too.
Have you also tried to leave only the airports from the package that you want to use - it may be worth deactivating the ones which you are not going to use.
And finally - have you ever modified your fsx.cfg? Some changes may have the influence to such problems. For example you can make sure that your MAX_TEXTURE_LOAD=1024
-
- 2-4 posts
- Posts: 3
- Joined: Monday 22 Jun 2020, 14:54
- Name: Tony
Re: Chicago Airports X
Thanks - I will try out the options you've suggested.
Regards,
Tony
Regards,
Tony
Re: Chicago Airports X
Hello In Prepar3d 4.5 I have no O'Hare conflicting scenery, mesh slider 5m, and at the south part of the Bravo bridge after G2 taxiway my airplane bounces and falls through the map.
David
David