Polish Airports vol.2 X
Latest version: v4.5 (2020)
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Polish Airports vol.2 X
Polish Airports vol.2 X by Drzewiecki Design
More info at/Więcej na: http://www.drzewiecki-design.net/prodPAv2_X.htm
English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
More info at/Więcej na: http://www.drzewiecki-design.net/prodPAv2_X.htm
English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Polish Airports vol.2 for FSX is not compatible with Simdesign's VFR Poland 3D Landmarks. You need to either unactivate this product in the Scenery Library while using our EPLL airport or remove the LODZ_Landmarks.bgl file from Main FS folder\Addon Scenery\Polish Airports vol.2\EPLL_X\Scenery folder. However this will remove all landmarks from Lodz city. If you use both products with no changes some objects like power plants with chimneys may be doubled.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Polish Airports v.2 FSX
Hi Dev. team.
I bought this scenery today from Simarked, very nice scenery , but i have one question to you, dev. team, it's about color on photoscenery!!
Is it possible to make that a little more green at spring and summer time, so it will "match" surrounding textures in FSX?
Now i think it's to blue, all over, that's the only thing that first touch me when i fired up my sim today.
But over all nice scenery, keep up the good work.
BRGDS
Stein-Ove
Hamar
Norway
I bought this scenery today from Simarked, very nice scenery , but i have one question to you, dev. team, it's about color on photoscenery!!
Is it possible to make that a little more green at spring and summer time, so it will "match" surrounding textures in FSX?
Now i think it's to blue, all over, that's the only thing that first touch me when i fired up my sim today.
But over all nice scenery, keep up the good work.
BRGDS
Stein-Ove
Hamar
Norway
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hello.
I think that there was no point to match the colour of our photoscenery to the default FSX scenery, because a lot of people use various custom made ground textures. Our textures were matched to the VFR Poland project. Anyway I am glad that you liked our scenery and thank you for purchasing it!
Best regards
Stanislaw
I think that there was no point to match the colour of our photoscenery to the default FSX scenery, because a lot of people use various custom made ground textures. Our textures were matched to the VFR Poland project. Anyway I am glad that you liked our scenery and thank you for purchasing it!
Best regards
Stanislaw
-
- 0-1 posts
- Posts: 1
- Joined: Friday 29 Apr 2011, 20:35
- Location: Pertshire
static aircraft
Hi,
I really enjoy your scenery, thanks for your hard work.
I am rather anti- static aircraft, since I have my own AI running to schedules.
Can I get rid of the ryanair at Lodz?
Ideally I don't want to loose the helicopters and smaller ai- the best layout for me personally would be to have static aircraft in twos bgls- one airliner and one for the specialist military and gai stuff.
Once again thanks for the scenery, look forward to future releases
Keith
I really enjoy your scenery, thanks for your hard work.
I am rather anti- static aircraft, since I have my own AI running to schedules.
Can I get rid of the ryanair at Lodz?
Ideally I don't want to loose the helicopters and smaller ai- the best layout for me personally would be to have static aircraft in twos bgls- one airliner and one for the specialist military and gai stuff.
Once again thanks for the scenery, look forward to future releases
Keith
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hello Keith.
In all our sceneries since Polish Airports vol.1 static aircrafts are compiled into a file named (...)_st.blg . However the Ryanair in Łodź will not harm your AI traffic at all, as the AFCAD file does not allow AI aircrafts to use it.
Personally I was anti-static for a long time, especially when I was flying on Vatsim, however these are not very poular airports and not many people have and AI traffic there at all. That is why we decided to provided some more "life" on that airport. The same is done in EPSC.
Best regards
Stanislaw
In all our sceneries since Polish Airports vol.1 static aircrafts are compiled into a file named (...)_st.blg . However the Ryanair in Łodź will not harm your AI traffic at all, as the AFCAD file does not allow AI aircrafts to use it.
Personally I was anti-static for a long time, especially when I was flying on Vatsim, however these are not very poular airports and not many people have and AI traffic there at all. That is why we decided to provided some more "life" on that airport. The same is done in EPSC.
Best regards
Stanislaw
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
It is a pleasure for me to inform you that the new version 3.0 of our Polish Airports vol.2 for FSX is now available for download. It will include new, fully automatic installer, new control tower in EPLL Łódź Lublinek, new VOR ZLG in EPZG Zielona Góra and new charts for those airports. The update is free for those who purchased the scenery (you simply need to download it again - Simmarket has issues an e-mail with all details). DEMO version has also been updated with the above changes.
________________
Miło mi poinformować, iż została opublikowana nowa wersja 3.0 naszego pakietu Polish Airports vol.2 pod FSX. Zawiera ona całkowicie zautomatyzowany installer, nową wieżę kontrolną w EPLL Łodzi Lublinku, nowy VOR ZLG w EPZG Zielonej Gorze oraz nowe mapki dla tych lotnisk. Update jest darmowy dla posiadaczy pełnej wersji (należy po prostu ściągnąć produkt ponownie - Simmarket roześle informacje ze szczegółami).
Wersja DEMO również została wzbogacona o powyższe zmiany a mapki można jak zawsze za darmo ściągnąć tu: http://drzewiecki-design.net/forum/viewtopic.php?t=158
________________
Miło mi poinformować, iż została opublikowana nowa wersja 3.0 naszego pakietu Polish Airports vol.2 pod FSX. Zawiera ona całkowicie zautomatyzowany installer, nową wieżę kontrolną w EPLL Łodzi Lublinku, nowy VOR ZLG w EPZG Zielonej Gorze oraz nowe mapki dla tych lotnisk. Update jest darmowy dla posiadaczy pełnej wersji (należy po prostu ściągnąć produkt ponownie - Simmarket roześle informacje ze szczegółami).
Wersja DEMO również została wzbogacona o powyższe zmiany a mapki można jak zawsze za darmo ściągnąć tu: http://drzewiecki-design.net/forum/viewtopic.php?t=158
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Uninstall Polish Airports Vol.2 X
Hi,
I just recognized that there is no uninstallation procedure for Pol. Airports Vol.2 (V3.0).
For the case (as happend related Krakow) there is a new main-release (no upgrade-file) I have to uninstall the old version first before I can reinstall the newer release.
Are there only the files in the scenery-folder to delete in this case?
BR
Heinz
I just recognized that there is no uninstallation procedure for Pol. Airports Vol.2 (V3.0).
For the case (as happend related Krakow) there is a new main-release (no upgrade-file) I have to uninstall the old version first before I can reinstall the newer release.
Are there only the files in the scenery-folder to delete in this case?
BR
Heinz
Thielo
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland