English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
Known issues: Autogen is usually automatically excluded from all areas where 3D custom abjects are located. We have tried for the first time to force FS to display autogen in such areas, however there is still a limitation we could not remove. When flying from an area with the above features, an autogen will be displayed correctly. When arriving at an area with such features, autogen will probably be removed. It means that departing from EPBC airport you should have all city's downtown autogen visible, but when arriving from another airport only custom 3D objects might be visible. You may treat this as an advantage since at the end of flights a system needs more resources to operate smoothly... however I admit this is an issue we could not find a solution to anyway.
Znane problemy:
Autogen jest standardowo usuwany z obszarów, gdzie umieszczone są obiekty 3D. Po raz pierwszy spróbowaliśmy oszukać FS aby wyświetlał autogen w takich miejscach, jednak nadal występują pewne ograniczenia. Autogen będzie prawdopodobnie wyświetlany tylko wówczas, gdy startujesz z miejsca w którym on się znajduje. Jeśli przylatujesz z innego miejsca, autogen będzie usuwany. Oznacza to, iż (prawdopodobnie) jedynie startując z lotniska EPBC będzie wyświetlany pełny autogen centrum miasta, gdy tymczasem będzie on usuwany, jeśli przylecisz z innego lotniska. Możesz traktować to jako zaletę, gdyż pod koniec lotów dla komputera mniejsza ilość obiektów powoduje bardziej płynne wyświetlanie symulacji, jednak przyznaję, iż jest to problem, którego nie daliśmy rady rozwiązać.
If you have experienced problems with different seasons displayed for airports and the rest of the scenery ground, please install this patch. There is no way of an exact control in FS2004 of what season is displayed for the default ground textures (those 4.8m/pix resolution) and sometimes this might look weird, even though we did our best in maching all layers of ground textures. You can however change seasons of those ground textures manually.
The patch will install a new folder into your Warsaw City 2013 installation directory (FS2004/Addon Scenery/Warsaw City 2013), called Ground Seasons. It will consist of 2 more folders - "NORMAL" and "NO SNOW". Each of them will have *.bmp files. To get a no-snow settings (most usable during Fall season), simply copy all *bmp. files from the NO SNOW folder to FS2004/Addon Scenery/Warsaw City 2013/Texture folder. As soon as you wish to go back to the normal settings, simply copy all *.bmp files from the NORMAL folder to FS2004/Addon Scenery/Warsaw City 2013/Texture folder. Please remember that "no snow" files will probably remove snow also from the winter season.
Jeśli występuje u ciebie problem z wyświetlaniem innej pory roku na lotniskach niż w scenerii okolicy, zainstaluj tę poprawkę. W FS2004 nie ma możliwości całkowitej kontroli nad wyświetlaniem groundu (tego o rozdzielczości 4.8m/pix) i w niektórych przypadkach (możliwe, że przez kilkanaście dni w roku ale możliwe też, że wcale!) wyświetlane pory roku nie będą się zgadzać.
Powyższa poprawka utworzy nowy folder w docelowej ścieżce instalacyjnej scenerii Warsaw City 2013 (FS2004/Addon Scenery/Warsaw City 2013), nazwany Ground Seasons. Będzie on zawierał dwa następujące foldery - "NORMAL" i "NO SNOW". Każdy z nich będzie zawierał pliki *.bmp. Aby otrzymać ustawienia bez śniegu (prawdopodobnie najbardziej przyda się jesienią), należy zwyczajnie skopiować wszystkie pliki *bmp. z folderu NO SNOW do folderu FS2004/Addon Scenery/Warsaw City 2013/Texture . Aby przywrócić pierwotne ustawienia, należy skopiować wszystkie pliki *.bmp z folderu NORMAL do folderu FS2004/Addon Scenery/Warsaw City 2013/Texture . Proszę pamiętać, iż ustawienia "no snow" prawdopodobnie usuną również śnieg występujący zimą.
Nie - tylko bezpośrednio w miejscach, gdzie są dodatkowe obiekty 3D, czyli np. centrum miasta. Zdarza się to jednak różnie - czasem przy przylocie z innego lotniska autogen się pojawia a czasem nie. Powiedziałbym, że jest tak samo jak w EPKK ale lepiej pod tym względem, iż da się autogen w ogóle oglądać przy starcie w jego pobliżu (myślę, że centrum powinno działać również w przypadku EPWA).
EPWA kiedy będzie nie wiem, ale jak będzie to zapewne w cenie EPKK.
Kilkanaście głównych budynków miasta i tak jak pisałeś, lotniska w postaci lite bez tekstur groundu i z teksturami budynków zmniejszonymi z 1024 do 256pix.
Being a happy user of your other products I purchased Warsaw 2013 from Simmarket soon after it was released. I have some problems with the scenery. Please see the images because they best illustrate the problem. I am a UT Europe user and I had previously installed your Warsaw 2009 airports (EPBC and EPMO). I am also running the MB Studio EPWA Warsaw 2010 airport. The older Warsaw airports were disabled so they would not conflict with the newer versions of the airports in Warsaw 2013. I also disabled the EPWA airport. There does seem to be some issues with UT as you can see. As an experiment, I installed Warsaw 2013 on an older computer that does not have UT installed. Everything seemed to work fine and the scenery looks like screen shots of the product on your site. As you can see from these images, not so much on my main computer. Looking forward to your assistance.
Hello.
The ground photoscenery is not working. Please check if you have:
WAWmapsatE.bgl
WAWmapsatN.bgl
WAWmapsatW.bgl
files installed in the:
FS2004\Addon Scenery\Warsaw City 2013\scenery
directory. As for now I would suggest reinstalling the whole package - sometimes such things happen without a reason (as you saw on your second PC). I don't thing UT has anything to do with this since I use it too... but you can try deactivating it in Scenery Library as a test.
Thank you for your quick reply. All the files you noted are present, so that is not the source of the problem. You are correct about UT not being the problem. I deactivated it and that did not solve the problem. So, I completely unistalled it but that did not solve the problem either. I removed Warsaw 2013 and reinstalled it again but that did not solve the problem. I had previously deactived your Warsaw 2009 airports and now I have completely removed both so that potential conflict has been eliminated. I removed MK Studio EPWA airport completely but that also did not solve the problem. I have no other addons or landclass files running in the Warsaw area. Obviously there is something preventing the ground photoscenery files from displaying but what could it be? I really hope you have another idea for me to try.
Hi. I will return from a trip in the end of the week and maybe we can try teamspeak so I could better see what is going on - currently no ideas.
I solved the problem. After our discussion I concluded that the problem must be a conflict in my set up. With just under 1000 addon scenery files it was like finding a needle in a hay stack but I did it. Through a process of elimination the problem was traced to Aerosoft German Airports 2 - 2012 EDDG Münster Osnabrück International Airport landclass folder. If the file "GermanyLC.bgl" is disabled the problem at Warsaw disappears. Eventhough my Warsaw 2013 was my most recent installation, it was at a lower layer level than EDDG because I had moved it after installation to be with the other Polish sceneries that had been installed a while ago. So I moved all my Drzewiecki airports so they were at a layer higher than the Aerosoft German airports and that solved the problem -- the Warsaw photo scenery now shows as it is supposed to.
This solution took hours to finds. I wanted to share it in case anyone ends up with the same problem. I would have not expected such a conflict. I am curious to know how that landclass file for an airport no where close to Warsaw could have caused such a problem.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Usergroups
Register
Log in
