Polish Airports vol.1 X

Latest version: v5.0 (2020)

Post Reply
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 1417
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.1 X

Post by Martin_Starski » Wednesday 20 May 2020, 19:43

Super - dzieki za potwierdzenie.

prezes_wojtek
5-12 posts
5-12 posts
Posts: 10
Joined: Friday 05 May 2017, 09:03
Location: EPBC

Re: Polish Airports vol.1 X

Post by prezes_wojtek » Saturday 23 May 2020, 22:15

Mam podobny problem ze światłami w całym PAvol1_X_v5.0 - nie są włączone w nocy.
Mam dziewiczą instalację P3D v5, SODE 1.7 od Orbx i komplet waszych scenerii. Jestem tuż po formacie dysku ze względu na problemy z aktywacją PMDG, więc na pewno nic tam nie zostało ze starych rzeczy.
EPWA i EPPO było OK, wygląda więc że faktycznie problem dotyka tylko PAvol1_X_v5.0 i UUEE_v2.3
Podmieniłem plik SODE, ale nic to nie dało (screeny z tego co sprawdzałem zrobione już po podmianie pliku SODE).
Documents.zip
You do not have the required permissions to view the files attached to this post.

User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 1417
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.1 X

Post by Martin_Starski » Saturday 23 May 2020, 22:43

Ta funkcja rzeczywiście dotyczy bodajże 4 naszych produktów, w tym PA vol.1 v5 i UUEE v2. Wiemy jaka była przyczyna braku wyświetlania świateł przez SODE i owe pliki sdx opublikowane na forum problem rozwiązują. Nie tylko potwierdziliśmy to u siebie ale również potwierdzili to użytkownicy tych scenerii. Czy światła działają jak się wybierze w instalatorze opcje "Airport lights always on"? Bo jeżeli nie to znaczy że SODE jest źle zainstalowane / skonfigurowane - wówczas sugeruje przejrzeć możliwe opcje zgodnie z SODE User Guide -> https://sode.12bpilot.ch/?page_id=9

prezes_wojtek
5-12 posts
5-12 posts
Posts: 10
Joined: Friday 05 May 2017, 09:03
Location: EPBC

Re: Polish Airports vol.1 X

Post by prezes_wojtek » Sunday 24 May 2020, 08:27

Dzięki!

Rzeczywiście to czego brakowało po zainstalowaniu czystego P3D na czystym systemie to instalacja FSX-SP2/X-PACK SimConnect. Teraz już światełka w Rzeszowie świecą aż miło.
No nic, lecę z Rzeszowa do Miami - przy okazji szacun za udostępnienie go za darmo z komentarzem że konkurencja zrobiła lepszy produkt!

User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 1417
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.1 X

Post by Martin_Starski » Sunday 24 May 2020, 10:13

Super - dzięki za miłe słowa :)

jimr
2-4 posts
2-4 posts
Posts: 4
Joined: Thursday 28 May 2020, 18:41
Name: James

Re: Polish Airports vol.1 X

Post by jimr » Friday 29 May 2020, 12:04

Hi I had same issue with Polish airports v1 following installation of SODE 1.7 so downloaded the attached and the log errors disappeared to be replaced with the following:

Code: Select all

[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_HEMS_Door2': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_HEMS_TR2': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPRZ_Jetway_Static_0': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_Static_0': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_Static_1': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_2': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_Static_2': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_Static_1': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_2': 'UNDEFINED.MDL' does NOT exist! 
[15:48:40.880] WARN SODE.FOLDERMANAGER : SimObject with SimTitle 'Drzewiecki_EPGD_Jetway_Static_2': 'UNDEFINED.MDL' does NOT exist! 

[15:51:29.814] ERROR SODE.FOLDERMANAGER : 'jetway.cfg' not found for Model '12bPilot_SODE_MissingObj' of SimObject 'PAvol1_X:Jetway 1 GATE 21'! Path='C:\Program Files (x86)\12bPilot\SODE\data\SimObjects\SODE_HLPR\model.MissingObj\jetway.cfg', Code(2)
[15:51:29.814] ERROR SODE.FOLDERMANAGER : 'jetway.cfg' not found for Model '12bPilot_SODE_MissingObj' of SimObject 'PAvol1_X:Jetway 1 GATE 21'! Path='C:\Program Files (x86)\12bPilot\SODE\data\SimObjects\SODE_HLPR\model.MissingObj\jetway.cfg', Code(2)
[15:51:29.819] ERROR SODE.FOLDERMANAGER : 'jetway.cfg' not found for Model '12bPilot_SODE_MissingObj' of SimObject 'PAvol1_X:Jetway 1 GATE 23'! Path='C:\Program Files (x86)\12bPilot\SODE\data\SimObjects\SODE_HLPR\model.MissingObj\jetway.cfg', Code(2)
[15:51:29.819] ERROR SODE.FOLDERMANAGER : 'jetway.cfg' not found for Model '12bPilot_SODE_MissingObj' of SimObject 'PAvol1_X:Jetway 1 GATE 23'! Path='C:\Program Files (x86)\12bPilot\SODE\data\SimObjects\SODE_HLPR\model.MissingObj\jetway.cfg', Code(2)
Please advise how I restore the jetways?

Thanks

User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 1417
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.1 X

Post by Martin_Starski » Friday 29 May 2020, 21:02

Let's start from basic information...
Which sim are we talking about?
Which scenery version have you installed?
Despite the errors in logs - what is the issue with the scenery?

For sure first advise would be to reinstall SODE and making sure that the SODE configuration is checked in accordance to the SODE user guide (https://sode.12bpilot.ch/?page_id=9). If it doesn't help, then I would try to do a clean install of our scenery and please remember to run the installer with admin rights. And finally please copy the new sdx file according to this post: viewtopic.php?f=23&t=260&start=975#p20188

jimr
2-4 posts
2-4 posts
Posts: 4
Joined: Thursday 28 May 2020, 18:41
Name: James

Re: Polish Airports vol.1 X

Post by jimr » Saturday 30 May 2020, 12:10

Apologies for the lack of info. Am running FSX SP2 with Polish Airports v1 5.0. Scenery was fine until I updated to SODE 1.7 and I received lots of log errors related to the Data probe at the 4 Polish Airports and other scenerys. I installed the sdx file related to same issue from this forum and from that point all the previous log errors related to the EDP disappeared to be replaced with the jetway issues shown in the log in my previous post. At EPGD for example the jetways are replaced with a big red X. Am reinstalling as you recommended and will advise. Appreciate the help.
Regards

jimr
2-4 posts
2-4 posts
Posts: 4
Joined: Thursday 28 May 2020, 18:41
Name: James

Re: Polish Airports vol.1 X

Post by jimr » Saturday 30 May 2020, 13:52

Further apologies....I am running FSX Sp2 with Polish Airports 1 v 4.6 and SODE 1.7.
Previously I had SODE 1.68 and no issues with this scenery or any other. Last week I got an update alert to V1.7 from my ORBX account and updated without considering the consequences. Subsequently I noted some sceneries were missing windsocks so I checked the SODE log to find numerous errors for many sceneries all related to the EDP including Polish Airports:

[16:53:53.044] ERROR SODE.XML : Environmental Data Probe SimObject 'EDP_EPKT' must have absolute value for altitude, not AGL! EDP not added!
[16:53:53.044] ERROR SODE.XML : Environmental Data Probe SimObject 'EDP_EPLB' must have absolute value for altitude, not AGL! EDP not added!
[16:53:53.044] ERROR SODE.XML : Environmental Data Probe SimObject 'EDP_EPGD' must have absolute value for altitude, not AGL! EDP not added!
[16:53:53.044] ERROR SODE.XML : Environmental Data Probe SimObject 'EDP_EPRZ' must have absolute value for altitude, not AGL! EDP not added!

As far as I could tell for Polish airports the scenery displayed correctly but for others the aspects controlled by the EDP were missing and showed on the log as errors including windsocks etc.

I was able to rectify the other scenery errors once I understood what to amend in the xml file but understand your data is stored in a sdx file. Reading this forum I downloaded the replacement sdx file and installed. At that point the above error related to the EDP disappeared but was replaced by the Jetway errors I previously mentioned and the Polish scenery with jetways just showed a red X where the jetway should be.

I reinstalled as you described but before adding the replacement sdx file checked the scenery. At this point the EDP errors show up again in the SODE log but I have my jetways back. When I replaced the sdx file the errors disappeared and so did the jetways.

Question: If I leave it as it is with the original sdx file so as to retain the jetways do I loose anything in the scenery or is there actually nothing that is controlled by the EDP? If there is then any advice how to regain the jetways with the replacement sdx in place?

User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 1417
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.1 X

Post by Martin_Starski » Saturday 30 May 2020, 16:46

As we mentioned before - new version of SODE implemented the changes, which do not ensure backward compatibility.
jimr wrote:
Saturday 30 May 2020, 13:52
Question: If I leave it as it is
There can be a problem with automatic activation of taxi / runway lights, but the solution is to run the installer again and set option "Airport lights always on"

jimr
2-4 posts
2-4 posts
Posts: 4
Joined: Thursday 28 May 2020, 18:41
Name: James

Re: Polish Airports vol.1 X

Post by jimr » Sunday 31 May 2020, 07:27

Understood.
Thanks

Post Reply