UUEE Moscow Sheremetyevo 2015
Latest version: v1.8 (2016)
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Thank you very much, I sent an email to the site SimWare. Congratulations on your wonderful achievement.
Thank you
Kind regard
[ Added: Sat Nov 08, 2014 07:33 ]
hello,
Having purchased the 2015 Moscow UUEE FS2004 on the website Simware October 29, malgrés my requests, emails, phone, he does not put version 1.1. online.Comment I do?
Version 1.0 crash my Fs2004 (OOM). I can send you my bill this purchase. The websit Simware is not serious
Thank you for your help
Best regard
Thank you
Kind regard
[ Added: Sat Nov 08, 2014 07:33 ]
hello,
Having purchased the 2015 Moscow UUEE FS2004 on the website Simware October 29, malgrés my requests, emails, phone, he does not put version 1.1. online.Comment I do?
Version 1.0 crash my Fs2004 (OOM). I can send you my bill this purchase. The websit Simware is not serious
Thank you for your help
Best regard
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi Istvan,
I had the same problem. But it's solved after restarting my PC... Now it works fine.
@Stanislaw: It seems, that there are some errors with the taxiway-lines. Some parts are missing and other taxiways have terrible "transitions" - for example the high-speed-taxiways. Will there be a fix available in the future?
What I also want to ask ist, if there will be an update for the AFCAD? At the moment, the coded AFCAD still includes many erros with the aircraft-parking-positions. So the airlines are a bit "spreaded" all over the airport and use the wrong positions.
Thanks a lot!
With kind regards
Felix
I had the same problem. But it's solved after restarting my PC... Now it works fine.
@Stanislaw: It seems, that there are some errors with the taxiway-lines. Some parts are missing and other taxiways have terrible "transitions" - for example the high-speed-taxiways. Will there be a fix available in the future?
What I also want to ask ist, if there will be an update for the AFCAD? At the moment, the coded AFCAD still includes many erros with the aircraft-parking-positions. So the airlines are a bit "spreaded" all over the airport and use the wrong positions.
Thanks a lot!
With kind regards
Felix
Unfortunately, the bridge still does not work. All OK, but not the passenger bridges.Felix wrote:Hi Istvan,
I had the same problem. But it's solved after restarting my PC... Now it works fine.
@Stanislaw: It seems, that there are some errors with the taxiway-lines. Some parts are missing and other taxiways have terrible "transitions" - for example the high-speed-taxiways. Will there be a fix available in the future?
What I also want to ask ist, if there will be an update for the AFCAD? At the moment, the coded AFCAD still includes many erros with the aircraft-parking-positions. So the airlines are a bit "spreaded" all over the airport and use the wrong positions.
Thanks a lot!
With kind regards
Felix
Other airports LHBP, LCLK, etc. EDDM. everything runs fine.
AES v2.37 works perfectly with UUEE2015. I still use DD SVO v1.0.
The problem you've noticed is an afcad issue at terminal F only and linked with aircraft position. Move your aircraft in Slew mode a slightly futher from the terminal and then reset position (press F7 in AES menu). I believe it should work.bankii wrote:Unfortunately, the bridge still does not work. All OK, but not the passenger bridges.
Stan,
I'm a new member and just purchased the new Moscow UUEE scenery for FS9 today (21st NOV).
The work is excellent and every bit as good as the wonderful LHBP product which I also have.
I do have some issues however. Two things, one I have NO MOVING VEHICLE TRAFFIC at all and there is a big texture issue right across the middle of the airport when in WINTER.
I seem unable to attach a picture of the problem on this forum for some reason.
I have Windows XP Pro SP3 and FS2004 with the 9.1 update correctly installed. I purchased the product from Simmarket, downloaded the EXE file and installed it. Before hand, I made sure that no other UUEE scenery or AFCAD files were installed. The scenery installs correctly but I have NO MOVING VEHICLES at all (I have loads of static ones!).
With Winter enabled there is a kind of different texture/partition that cuts through the middle of the airport. I have altered the layering of the scenery and even placed it above everything but the effect is still the same.
I next tried moving the two LD_*.bgl files into there own LC Scenery folder as per a fix suggested here. But the effect remains. I noticed that the same two LD_*.bgl files were also found in the C:\ ..... \Flight Simulator 9\Addon Scenery/Scenery ..... folder as well as inside the new UUEE installation scenery folder. Tried removing them - no change.
Next, I completely removed the new UUEE installation. Looked into ADD/REMOVE PROGRAMS but there was no entry there for this scenery so it clearly does not install into the Registry. Anyway, I removed all trace and then rebooted the PC. I re-downloaded a fresh EXE file from Simmarket and again installed and then rebooted after install.
No change. I still have no moving vehicles and there is still the same very different texture "band" across the middle of the airport.
I will try to find a way of uploading the picture I have taken of the problem. I would appreciate any help you might be.
Thanks for your time,
kind regards,
Lee
I'm a new member and just purchased the new Moscow UUEE scenery for FS9 today (21st NOV).
The work is excellent and every bit as good as the wonderful LHBP product which I also have.
I do have some issues however. Two things, one I have NO MOVING VEHICLE TRAFFIC at all and there is a big texture issue right across the middle of the airport when in WINTER.
I seem unable to attach a picture of the problem on this forum for some reason.
I have Windows XP Pro SP3 and FS2004 with the 9.1 update correctly installed. I purchased the product from Simmarket, downloaded the EXE file and installed it. Before hand, I made sure that no other UUEE scenery or AFCAD files were installed. The scenery installs correctly but I have NO MOVING VEHICLES at all (I have loads of static ones!).
With Winter enabled there is a kind of different texture/partition that cuts through the middle of the airport. I have altered the layering of the scenery and even placed it above everything but the effect is still the same.
I next tried moving the two LD_*.bgl files into there own LC Scenery folder as per a fix suggested here. But the effect remains. I noticed that the same two LD_*.bgl files were also found in the C:\ ..... \Flight Simulator 9\Addon Scenery/Scenery ..... folder as well as inside the new UUEE installation scenery folder. Tried removing them - no change.
Next, I completely removed the new UUEE installation. Looked into ADD/REMOVE PROGRAMS but there was no entry there for this scenery so it clearly does not install into the Registry. Anyway, I removed all trace and then rebooted the PC. I re-downloaded a fresh EXE file from Simmarket and again installed and then rebooted after install.
No change. I still have no moving vehicles and there is still the same very different texture "band" across the middle of the airport.
I will try to find a way of uploading the picture I have taken of the problem. I would appreciate any help you might be.
Thanks for your time,
kind regards,
Lee
Lee James
Senior Captain
Events Manager
British Airways Virtual
Senior Captain
Events Manager
British Airways Virtual
I confirm that issue (see picture posted below).BAW9DV wrote: there is a big texture issue right across the middle of the airport when in WINTER.
https://img-fotki.yandex.ru/get/15529/2 ... c_orig.jpg
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
UUEE for FS9 (just as the XP version) does not include any moving traffic. Why have you thought it does? http://www.drzewiecki-design.net/prodUUEE_2015.htm
Yes, that snow texture is my programming fault but it will switch to a correct texture in a week (December 1st).
Yes, that snow texture is my programming fault but it will switch to a correct texture in a week (December 1st).