NY Airports v2 X
Latest version: v2.6 (2020)
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
NY Airports v2 X
NY Airports v2 X for FSX and P3D by Drzewiecki Design
Product description:
NY Airports v2 X: KJFK, KLGA, KTEB → http://www.drzewiecki-design.net/prodNYAirports_X.htm
NY Airports v2 X: KEWR, KLDJ, KCDW → http://www.drzewiecki-design.net/prodNYAirports2_X.htm
English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
The upgrade from v1 to v2 is payware (with a 25% discount). Differencies in comparison to the version 1:
• Much better visuals
- 100% of objects re-exported
- new ground polygons with better textures
- new aerial images
- better detail objects (ground service vehicles, cars, people)
- animated objects
• Performance up to 300% higher than in v1
- Extensive LODs
- Custom shadows only
- Lights done from scratch
- All models re-exported and highly optimized
- All textures compiled to 4096pix sheets
- Ground polygons highly optimized
- New, optional static aircraft
• Updated layouts (aprons, taxiways, markings etc.)
• SODE support for seasonal changes and jetway animations
• New lighting system (as in the latest Polish Airports series) for runways and taxiways, much more performance friendly and realistically looking
• New apron lights - optimized for performance and best visuals (see screenshots below)
• No default library objects to be used - this will boost up the performance too
• Full compatibility with FSX, FSX:SE, P3Dv1, P3Dv2, P3Dv3 and P3Dv4
Additionally:
• "Extracts" will no longer be available - instead customers with "Extracts" (and the full v1 version) will receive a 25% discount for the full version. Please note that customers with "Extracts" will get the discount only for the product where the same airport is included - if you have a KJFK Extract you will get a discount for NY Airports v2 X: KJFK, KLGA, KTEB only.
• The product is distributed in 2 parts - "NY Airports X v2: KJFK, KLGA, KTEB" and "NY Airports X v2: KEWR, KLDJ, KCDW". While working perfectly together and even installing into one folder, each part will still be independent.
• Each airport will be optional with optional features to be controlled via installer (similar to how we did it in Moscow) - thanks to this all airports will use shared textures, perform better and use less VAS.
Product description:
NY Airports v2 X: KJFK, KLGA, KTEB → http://www.drzewiecki-design.net/prodNYAirports_X.htm
NY Airports v2 X: KEWR, KLDJ, KCDW → http://www.drzewiecki-design.net/prodNYAirports2_X.htm
English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
The upgrade from v1 to v2 is payware (with a 25% discount). Differencies in comparison to the version 1:
• Much better visuals
- 100% of objects re-exported
- new ground polygons with better textures
- new aerial images
- better detail objects (ground service vehicles, cars, people)
- animated objects
• Performance up to 300% higher than in v1
- Extensive LODs
- Custom shadows only
- Lights done from scratch
- All models re-exported and highly optimized
- All textures compiled to 4096pix sheets
- Ground polygons highly optimized
- New, optional static aircraft
• Updated layouts (aprons, taxiways, markings etc.)
• SODE support for seasonal changes and jetway animations
• New lighting system (as in the latest Polish Airports series) for runways and taxiways, much more performance friendly and realistically looking
• New apron lights - optimized for performance and best visuals (see screenshots below)
• No default library objects to be used - this will boost up the performance too
• Full compatibility with FSX, FSX:SE, P3Dv1, P3Dv2, P3Dv3 and P3Dv4
Additionally:
• "Extracts" will no longer be available - instead customers with "Extracts" (and the full v1 version) will receive a 25% discount for the full version. Please note that customers with "Extracts" will get the discount only for the product where the same airport is included - if you have a KJFK Extract you will get a discount for NY Airports v2 X: KJFK, KLGA, KTEB only.
• The product is distributed in 2 parts - "NY Airports X v2: KJFK, KLGA, KTEB" and "NY Airports X v2: KEWR, KLDJ, KCDW". While working perfectly together and even installing into one folder, each part will still be independent.
• Each airport will be optional with optional features to be controlled via installer (similar to how we did it in Moscow) - thanks to this all airports will use shared textures, perform better and use less VAS.
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Witam.
Nic mi na ten temat nie wiadomo: http://www.pcaviator.com/store/manufact ... urerid=108 , zresztą NYAv2 jest już tam opublikowane.
Nic mi na ten temat nie wiadomo: http://www.pcaviator.com/store/manufact ... urerid=108 , zresztą NYAv2 jest już tam opublikowane.
Beautiful, thank you.
I'm just to about to order in my preferred shop (Simmarket), but let me ask one question first, please.
For the JFK/LGA/TEB package on simmarket, the update (as mentioned, 25%) is offered for previous orders of
- JFK extract (okay)
- TEB/CDW/LDJ extract (okay)
- FSPS - FSX FIBER ACCELERATOR (aehm... did not expect that)
(See http://secure.simmarket.com/drzewiecki- ... -p3d.phtml )
In particular, the LGA extract (which I have ordered previously on Simmarket) is missing. May I assume that this is an error by Simmarket and it should read "LGA extract" and not "FSX Fiber Accelerator"?
If so, I'll place my order as soon as this has been fixed.
Thanks for checking,
Markus
I'm just to about to order in my preferred shop (Simmarket), but let me ask one question first, please.
For the JFK/LGA/TEB package on simmarket, the update (as mentioned, 25%) is offered for previous orders of
- JFK extract (okay)
- TEB/CDW/LDJ extract (okay)
- FSPS - FSX FIBER ACCELERATOR (aehm... did not expect that)
(See http://secure.simmarket.com/drzewiecki- ... -p3d.phtml )
In particular, the LGA extract (which I have ordered previously on Simmarket) is missing. May I assume that this is an error by Simmarket and it should read "LGA extract" and not "FSX Fiber Accelerator"?
If so, I'll place my order as soon as this has been fixed.
Thanks for checking,
Markus
CTD is P3D v4
Installed via the installer (did not change anything as far as path, etc..) and P3D was CTD after the initial startup screen, I selected KIAH (was going to fly to KEWR) and P3D would CTD after I selected to load the scenario. Also tried the default scenario and still got the same result. Deleting the NY airports from the addons folder and add-ons.cfg entry inside ProgramData\Lockheed Martin\Prerpar3D v4 cured it.
Even loading the scenery the old way without the addon xml via the scenery.cfg causes a CTD. Must be a file that the sim don't like somewhere within.
I only installed just JFK, EWR and LGA.
Removing the scenery and no more issues with P3D v4. Starts up just fine.
A user on AVSIM said this: Check encoding in addon.xml with Notepad++. Mine was set as UTF-8.
Can you check to see if your product is compliant with this in P3D v4. Thanks
Even loading the scenery the old way without the addon xml via the scenery.cfg causes a CTD. Must be a file that the sim don't like somewhere within.
I only installed just JFK, EWR and LGA.
Removing the scenery and no more issues with P3D v4. Starts up just fine.
A user on AVSIM said this: Check encoding in addon.xml with Notepad++. Mine was set as UTF-8.
Can you check to see if your product is compliant with this in P3D v4. Thanks
Eric
-
- 13-25 posts
- Posts: 16
- Joined: Thursday 13 Jul 2017, 02:07
- Location: USA
Hi,
I installed both packages today, only selected LGA, EWR and JFK but every single airport seemed to install, and all the one folder. This lead to horrible performance. Is there anyway we can get separate folders for each airport? And I am not sure about all the airports installing either
I installed both packages today, only selected LGA, EWR and JFK but every single airport seemed to install, and all the one folder. This lead to horrible performance. Is there anyway we can get separate folders for each airport? And I am not sure about all the airports installing either
Thanks,
Sam Wheeler
Sam Wheeler
How do you delete the demo?
I don't see an uninstaller anywhere. It's greyed out in the scenery library. How do you delete the demo for P3Dv4?
Reinstalled and still same issue. Other users apparently using it with the encoding error in addon.xml without issues. Not me, as soon as I install this product with JFK, LGA and EWR installed P3D closes as soon as I select "Ok" on the startup scenario screen. No matter if I am starting with the default plane and location or anywhere else. As soon as I remove NY Airports v2 P3D goes back to working normally. Right now I am at a loss and cannot use what I paid for.
Eric
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi. Indeed, this has been already reported to the store.ps1flyer wrote:In particular, the LGA extract (which I have ordered previously on Simmarket) is missing. May I assume that this is an error by Simmarket
Contacted via @.B777ER wrote:P3D was CTD
Hi. What do you mean by "seemed"? Are they visible in the sim? The one folder installation is the best for performance as shared textures and shared models can be used limiting VAS.samwheeler wrote:every single airport seemed to install
Just as with any other addon (in P3Dv4): P3Dv4 upper menu → Options → Add-ons. Or simply remove the product's folder from the Addon Scenery folder.regulate wrote:I don't see an uninstaller anywhere.
Yes, exactly.kenthom wrote:Do you simply run the installer a second time and un-check the GA airports to remove them?
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi.
Discounts are given by vendors and a vendor might even choose not to give one (which happens rarely but it does).
http://drzewiecki-design.net/forum/view ... 1197#11197
Discounts are given by vendors and a vendor might even choose not to give one (which happens rarely but it does).
http://drzewiecki-design.net/forum/view ... 1197#11197
- DD Stanislaw
- Administrator
- Posts: 6267
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Chodziło mi o ich australijską mutację: PC Aviator AustraliaDD Stanislaw wrote:Witam.
Nic mi na ten temat nie wiadomo: http://www.pcaviator.com/store/manufact ... urerid=108 , zresztą NYAv2 jest już tam opublikowane.