EPWA Warsaw Chopin Airport 2015

Latest version: v1.2 (2016)

Archive only - support discontinued
Locked
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

sle134 wrote: RAM jest 12 GB
A to RAM jest w porządku (powyżej 6GB i tak symulator nie wykorzystuje)
sle134 wrote: INTEL CORE i7-4500CPU 1,80GHz 2,40Ghz 64 bit
Z tego opisu nadal nie rozumiem, jaka jest prędkość taktowania... Minimum praktyczne (efekty wizualne wersus wydajność) to 3,5 GHz, optymalna to 4,5 GHz.
sle134 wrote: komputer nie jest "starym trupem"
Ale nie mogę wierzyć na słowo - nadal nie znam specyfikacji. Komputer wcale nie musi być stary aby być słabej wydajności.
sle134 wrote: kupiłem produkty w dobrej wierze
Wiara nie ma tu nic do rzeczy - raczej matematyka.
sle134 wrote: przy obu zakupionych przeze mnie produktach nie ma nic napisanego o wymaganiach sprzętowych
Dlatego, że minimalne wymagania sprzętowe są takie same jak dla danych platform (w tym przypadku FS2004). Da się odpalić? Da się. Ale wiadomo, że na wolniejszym sprzęcie będzie wyglądać gorzej a na szybszym - lepiej. Gdyby produkt wcale nie działał, to byłaby zupełnie inna sprawa.
sle134 wrote: Wnioskuje,ze oprócz przesunięcia suwaków nic nie jest w stanie Pan mi pomóc.

A czego by Pan oczekiwał? Mogę na przykład pomóc Panu w wyborze procesora, odpowiedniego do symulatora lotu. Na przykład: http://allegro.pl/intel-i5-2500k-5-0-gh ... 18340.html (wariant tańszy) lub http://allegro.pl/procesor-intel-i7-479 ... 31758.html (wariant droższy). Oczywiście pomiędzy Pana procesorem a tym tańszym są jeszcze setki modeli, które będą szybsze od tego, którego Pan ma.
sle134 wrote:Proszę tylko o informację jakie parametry ma komputer, z którego screeny zostały opublikowane na stronie DD
Nie wiem, po co Panu taka informacja, ale proszę bardzo:

- Ekran 17,3" LED Full HD 1920 x 1080, Non Glare, P370EM
- Procesor: Intel Desktop Core i7-3970X EXTREME 6 x 3.5GHz, 15MB Cache
- Pamięć RAM: 32 GB (4x8) KINGSTON HyperX 1600 MHz DDR3 CL9
- Dysk twardy: 512 GB SSD SAMSUNG SSD840 SATA3 (540 / 520 MB/s), Pro
- Drugi Dysk Twardy: HDD 1TB HGST Travelstar 7K1000, 7200 RPM, 32MB cache
- Trzeci Dysk Twardy: HDD 1TB HGST Travelstar 7K1000, 7200 RPM, 32MB cache
- Karta Graficzna: NVIDIA QUADRO K5000M (N14E-Q5) 4GB GDDR5
sle134 wrote:o publikację informacji na produktach (...) jakie powinny spełniać wymagania sprzętowo aby uniknąć niezadowolenia klientów.
Jak wyżej - minimalne wymaganie sprzętowe są takie same jak wymagania platformy i nasze produkty będą działać. Co do wymagań zalecanych to zależy do inwidualnego sprzętu, są zresztą tysiące informacji i sugestii na ten temat online. Wielokrotnie podawałem również linka do tego tutoriala: http://drzewiecki-design.net/forum/viewtopic.php?t=337
Image
sle134
5-12 posts
5-12 posts
Posts: 6
Joined: Tuesday 13 Oct 2015, 10:21
Location: Dzierżoniów

Post by sle134 »

Dziękuję za informacje.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Gdybym mógł czymś jeszcze pomóc to proszę o info.
Image
edetroit
13-25 posts
13-25 posts
Posts: 13
Joined: Monday 24 Feb 2014, 16:53
Location: London, U.K

Post by edetroit »

A little screenshot. :D

Image
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Love it! :)
Image
John1604
2-4 posts
2-4 posts
Posts: 2
Joined: Friday 06 Jan 2012, 20:45
Location: Rotterdam, Netherlands

Post by John1604 »

Dear Stanislaw,

I did had also a CTD (black screen) with FS9.
I did make a T/O from rwy 29 and half away the runway my system crashed.
I did fly the ifly 738 (latest version) and connected to VATSIM.
I got installed EPWA 2015 and City 2015.

I can tell you that I have a system with approx 860 sceneries installed and my last CTD was more then 2 years ago.

What can be the problem with this scenery ?

Here is my system configuration : Home Cockpit
Regards,
John

My Home Cockpit : www.john1604.nl
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Hello.
I would suggest that:

a) you preccesor clock speed (1st computer) is extremely low in comparison to what is possible for FS9 (around 4,5-5GHz); it can be i7, but it does not matter. If adding 2GB of RAM to your second computer your FS9 would perform much better there I believe...

b) FS9 as well as all later sims (was fixed a lot in P3Dv3) has problems with managing large amount of sceneries thus it is best to have only those airport sceneries active which you use for your flights. In case of 860 installed and active sceneries I would be afraid to launch your sim at all... :mrgreen:

These are just suggestions but the reason may be different - however as for now we have no other clue. We will be searching for them but as for now I can't really help you more...

That is a nice setup BTW - it reminds me the NASA space shuttle launching facility :)
Image
John1604
2-4 posts
2-4 posts
Posts: 2
Joined: Friday 06 Jan 2012, 20:45
Location: Rotterdam, Netherlands

Post by John1604 »

DD Stanislaw wrote:Hello.
I would suggest that:

a) you preccesor clock speed (1st computer) is extremely low in comparison to what is possible for FS9 (around 4,5-5GHz); it can be i7, but it does not matter. If adding 2GB of RAM to your second computer your FS9 would perform much better there I believe...

b) FS9 as well as all later sims (was fixed a lot in P3Dv3) has problems with managing large amount of sceneries thus it is best to have only those airport sceneries active which you use for your flights. In case of 860 installed and active sceneries I would be afraid to launch your sim at all... :mrgreen:

These are just suggestions but the reason may be different - however as for now we have no other clue. We will be searching for them but as for now I can't really help you more...

That is a nice setup BTW - it reminds me the NASA space shuttle launching facility :)
Dear Stanislaw,

This isn't the answer what I expected from a scenery maker. :(
What I just told before, my system is running smooth, with a average between 20-30 fps.
Also this scenery I got between 15-20 fps.

About my system, I run only FS2004 on system 1 and system 2 is for the sub programs ASE, VatSpy, FSINN and Realtime.
System 3 is for my charts en connecting to FlyUK server.
System 4 is for FSC.

I did also saw before, I got since more then 2 years no CTD and I fly weekly about 5-10 hours.
I work with windows XP SP2 64bit (gaming edition) and fully updated.
All my drivers are the last one.
The startup time from all systems isn't approx 5 min. :) :) :)

Lucky I got a lot of flightsim experience/knowledge and go use some pograms to find the mistake/solution in this scenery,

But please keep remember that I did pay for it and so I expect also some support about it.
Not only with links how to find a solution by my own, because that isn't a good support from your company. :(

Have a nice day......
Regards,
John

My Home Cockpit : www.john1604.nl
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

The support sais: we have no solution to your problem right now but we will investigate it. I can't give you any better anwer as there might be hundrieds of things that lead to CTDs (this is not OOM neither low FPS). I am trying to help but I am not a miracle man.

As a home cockpit building myself I was trying to suggest an inadequate usage of the hardware you have but if you are completely confident everything is fine (with 2,6GHz processors) then I have nothing more to add.
John1604 wrote:I did pay for it
Is there any other way of getting it?
Image
qba27
0-1 posts
0-1 posts
Posts: 1
Joined: Saturday 11 Jul 2015, 21:39
Location: Kutno

Post by qba27 »

Mam problem z GSX. Problem dotyczy wypychania, które kończy się w połowie drogi do taxi M. Problem dotyczy tylko Warszawy. W opcjach wszystko ustawione na default. Próbowałem na Gate 12, 13, 15, 15LR i innych przy terminalu ale wszędzie wypychanie kończy się w połowie bez 'wykręcenia' mimo że stanowiska mają ustawione LEFT, RIGHT lub BOTH w push direction. Najnowsza wersja z simmarketu pobrana. Pamiętam, że na na pierwszych wersjach scenerii nie miałem takiego problemu. Pomaga krótkie odinstalowanie/zainstalowanie scenerii, następnie wszytko jest ok do momentu następnego uruchomienia FS:SE. Pytam tutaj zanim na forum GSX się zarejestruje.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Witam.
Testowałem, nie zauważyłem takiego problemu. W AFCADach nic nie było zmieniane. Myślę, że autorzy GSX prędzej znajdą potencjalne rozwiązanie. Jeśli to coś w naszych plikach to oczywiście poprawimy, ale tak jak mówię, od pierwszej wersji nic w tym zakresie zmieniane nie było.
Image
giry
2-4 posts
2-4 posts
Posts: 3
Joined: Thursday 26 Nov 2015, 20:31
Location: Alassio

Post by giry »

Hallo Stanislaw.
Same problem also for me.
I'm FS9 user...and my Flight Simulator CTD when I try to take a flight from WAW.
At 90% after 5/10 min...in the airport...one time during the flight to KRK .
I don't know why...but It's very strange.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Hello.
Could you please provide me your basic specs - proc speed and ram?
Generally I don't think this is related to the scenery performance itself - rather to one element that is causing issues. Since I cannot reproduce the problem the absolutely best method would be to do http://drzewiecki-design.net/forum/viewtopic.php?t=330 . This will obviously take time since CTD does not happen instantly but as for now I don't see any better solution to this... By the way, did you try same thing with demo version?
Image
giry
2-4 posts
2-4 posts
Posts: 3
Joined: Thursday 26 Nov 2015, 20:31
Location: Alassio

Post by giry »

Hello Stanislaw.
My spec are this:
Processor: ADM Athlon IIX4 620 2.60GHz.
RAM: 4.00 GB
OS: Windows 7 Ultimate
Video: NVIDIA GeForce GTX 650

I just don't have anymore problems with other "Drzewiecki Sceneries" and, in general, with other sceneries.
It's the first time that I've this type of CTD (black screen after 5 min.).

I'll hope to find a solution because actually this scenery it's unavailable.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Post by DD Stanislaw »

Extremely slow processor... Dual Cores are so cheap nowadays, why not upgrading to something faster?
Do you use FS9.1 (the patched version)?
Anyway, I believe the link given above would really be the best solution since it works in 100% cases...
giry wrote:don't have anymore problems with other (...) sceneries
EPWA is an extremely detailed product... None of our other airports are close to what is presented in EPWA.
Image
Locked