RJAA Tokyo Narita P3D
Latest version: v1.1 (2020)
Re: RJAA Tokyo Narita P3D
Just did a flight into RJAA and performance was great. Visibility was low so I was doing an ILS approach into 34L. I noticed the glide slope seems very high. The ILS had me touching down mid runway and the papi lights were 4 white. Can someone verify the ILS for 34L.
Re: RJAA Tokyo Narita P3D
Wise87 wrote: ↑Sunday 18 Oct 2020, 20:49 Just did a flight into RJAA and performance was great. Visibility was low so I was doing an ILS approach into 34L. I noticed the glide slope seems very high. The ILS had me touching down mid runway and the papi lights were 4 white. Can someone verify the ILS for 34L.
I confirm this.
Re: RJAA Tokyo Narita P3D
First of all, very well done DDesign! Perfect piece of scenery, performance is butter even using 6GB of VRAM.
I confirm what was said before though, glideslope for ILS34L is way too flat near the rwy, I had 3 whites for first half of the final app (B748), and then went all the way to 4 whites. It needs to be corrected.
I confirm what was said before though, glideslope for ILS34L is way too flat near the rwy, I had 3 whites for first half of the final app (B748), and then went all the way to 4 whites. It needs to be corrected.
Re: RJAA Tokyo Narita P3D
I just purchased this scenery, and although the airport itself is nicely done, I'm rather disappointed with how the scenery immediately around the airport blends in with the scenery outside the modeled area. There are very few buildings, the colors are washed out, and there is almost no vegetation, compared to the areas outside the airport vicinity. I flew in to Narita for 8 years, and the areas immediately around the airport did not look like this. The Narita Hilton Hotel, where the crews stayed is modeled well, but again the terrain surrounding it is nothing like it is in the real world. I own several DD products, and haven't seen this issue in any them. I wanted to upload a screen shot, but everything here is in Polish, so I' not sure how to do it.
Also, I'm not sure if this is a scenery issue or not, but I flew the ILS to RWY 34L and the aircraft was several hundred feet higher above the ground than it should have been, even though I was on the glide slope during the entire approach procedure. The VASI lights were all white, which indicates the aircraft is well above the glideslope. This wasn't the case with the old scenery I was using.
Pete Locascio
Also, I'm not sure if this is a scenery issue or not, but I flew the ILS to RWY 34L and the aircraft was several hundred feet higher above the ground than it should have been, even though I was on the glide slope during the entire approach procedure. The VASI lights were all white, which indicates the aircraft is well above the glideslope. This wasn't the case with the old scenery I was using.
Pete Locascio
Re: RJAA Tokyo Narita P3D
Pete Locascio
I hope the lack of scenery details around the airport will come with the release of Tokyo City.
I hope the lack of scenery details around the airport will come with the release of Tokyo City.
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: RJAA Tokyo Narita P3D
Zaiste - my również
Please try the attached file - it's necessary to choose and copy to the scenery folder the file RJAA_ADE.BGL which allign to your installation config, so with static or without static. Let us know if it's working fine now.
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: RJAA Tokyo Narita P3D
Does it look like on our screenshots ( http://www.drzewiecki-design.net/prodRJAA_P3D.htm ) or differently?
Do you have autogen and vegetation on max settings?
-
- 2-4 posts
- Posts: 2
- Joined: Monday 19 Oct 2020, 14:54
- Name: Michael
- Location: London
Re: RJAA Tokyo Narita P3D
So happy this scenery has been launched!!
Just landed at night, and I appear to have no dynamic lighting. Running in p3d 4.5....
What are the files I should check to make sure its all installed correctly, seems to be the only bit not working
Just landed at night, and I appear to have no dynamic lighting. Running in p3d 4.5....
What are the files I should check to make sure its all installed correctly, seems to be the only bit not working
Re: RJAA Tokyo Narita P3D
Two things I would like to add, GSX seems to freeze up with awaiting operqtion to finish(OperatingJetways) when ordering boarding, deboarding or pushback.
The winter scene is really nice but there isn't any snow away from the airport. If you set winter in the sim, the date it choses has no snow in Japan.
Also, I nearly forgot, shouldn't the terminal windows be more dark? (Especially T1) i understand this is no issue if you have shadows on.. but not everyone can afford that.
The winter scene is really nice but there isn't any snow away from the airport. If you set winter in the sim, the date it choses has no snow in Japan.
Also, I nearly forgot, shouldn't the terminal windows be more dark? (Especially T1) i understand this is no issue if you have shadows on.. but not everyone can afford that.
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: RJAA Tokyo Narita P3D
Dynamic lights should be in the following file: RJAA_ApronOBJ
Without it there will be dark at night in all aprons. Do you have it in the scenery folder?
If you load the plane in RJAA to start the flight, is DL there?
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: RJAA Tokyo Narita P3D
I think it may be worth asking FSDT about this behavior.
The point is that P3D generates snow textures in Japan too but if the weather is in the "snow mode". This is the specific of P3D.
Re: RJAA Tokyo Narita P3D
Thanks for fixing.Martin_Starski wrote: ↑Monday 19 Oct 2020, 07:18 Please try the attached file - it's necessary to choose and copy to the scenery folder the file RJAA_ADE.BGL which allign to your installation config, so with static or without static. Let us know if it's working fine now.
I tried it and I found it fix on my environment.
I got pretty nice landing!!
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: RJAA Tokyo Narita P3D
Perfect - thanks for feedback.
-
- 0-1 posts
- Posts: 1
- Joined: Thursday 22 Oct 2020, 15:54
- Name: MichelD
Re: RJAA Tokyo Narita P3D
I'm confused... is the attach RJAA file is to fix the runway 34L problem?
- Martin_Starski
- 200+ posts
- Posts: 3397
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: RJAA Tokyo Narita P3D
Hi, fix is attached to this post: viewtopic.php?p=22392#p22392
It will be included in next updated version too.
It will be included in next updated version too.