Polish Airports vol.2 X

Latest version: v4.5 (2020)

Post Reply
AlekseyK
13-25 posts
13-25 posts
Posts: 22
Joined: Monday 07 Oct 2013, 00:57
Location: Russia

Re: Polish Airports vol.2 X

Post by AlekseyK »

When starting p3d V5, an error POPs up. I updated Polish airports version 4.4
Image
Image
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.2 X

Post by Martin_Starski »

Aleksey, are you sure that you have installed our updated packages of PA vol.1 and PA vol.2, which are compatibile with P3D v5.

SimObjects are solely referenced by a “SimTitle”, which must be unique, otherwise it will result in undefined behaviour when there are duplicates. P3D v4 didn’t care about checking duplicate SimTitles, it has left this responsibility to the add-on developers. Apparently the new P3D v5 checks for duplicates and will issue error messages. That's why we solved such issues in our last updated versions adapted to P3D v5.

If you installed both last versions of PA vol.1 and PA vol.2, you may try to remove all files relating these packages from the SODE folder and reinstall our scenery again. Such error shouldn't take place then.
AlekseyK
13-25 posts
13-25 posts
Posts: 22
Joined: Monday 07 Oct 2013, 00:57
Location: Russia

Re: Polish Airports vol.2 X

Post by AlekseyK »

Thanks. I installed the new version in P3DV5 only PA Vol2 4.4, but I have the Polish airports package vol1 V4.6 installed for P3D V4 and it obviously won't be updated for P3DV5. In order for the error to go away for vol2 I need to buy a new version of Polish airports vol1 V5?
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.2 X

Post by Martin_Starski »

Yes, I suggest upgrading to PA vol1 v5, which is fully compatibile with P3D v5.
d3p3k
5-12 posts
5-12 posts
Posts: 6
Joined: Tuesday 23 Jun 2020, 22:23
Name: Dominik

Re: Polish Airports vol.2 X

Post by d3p3k »

Witam.
Najnowsza wersja 4.4. W p3dv4.5 coś dziwnego dzieje się z pasem w nocy. Świeci jakby był pokryty lodem, dodatkowo nie widać oznaczeń dróg startowych i kołowania. Trzeba się przyglądać żeby je zobaczyć. Dyskwalifikuje to całkowicie lotnisko z latania nocą. Ten sam efekt jest na wszystkich lotniskach PA vol 2. Czy to normalne? Pozdrawiam serdecznie.
You do not have the required permissions to view the files attached to this post.
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.2 X

Post by Martin_Starski »

To wygląda na warstwę z deszczem...

Rozumiem, że próbowaleś reinstalacji z uprawnieniami administratora?

Masz jakieś inne dodatki?

Gdzie umiejscowiona jest paczka PA vol.2 X w bibliotece?

Podeślij mi proszę tez screeny ustawień z symulatora - moze to nas tez do czegoś naprowadzi, bo jak do tej pory nikt nie zglaszał podobnych problemow :roll:

Tak dla całkowitej pewności - pobierz tez sobie pliki Effects do symulatora z tego wątku: http://drzewiecki-design.net/forum/view ... 469#p19908
d3p3k
5-12 posts
5-12 posts
Posts: 6
Joined: Tuesday 23 Jun 2020, 22:23
Name: Dominik

Re: Polish Airports vol.2 X

Post by d3p3k »

Jeżeli chodzi o dodatki to mam ich całkiem sporo. Orbx Base + OpenLC + Vector. Niebo: Active Sky + Asca. Ograniczając się do Polski: PA vol. 1,2,3, Warszawa + lotnisko, KrakówX. Envtex i cienie Tomatoshade. Instalator włączałem z uprawnieniami administratora. Jeżeli chodzi o umiejscowienie, ponieważ to świeża instalacja, lotniska EPZG, EPLL, EPSC. EPRA znajdują się na samej górze. Konstrukcja biblioteki wygląda mniej więcej tak: Scenerie --> Orbx airports and regions --> OpenLC --> Cała reszta --> Vector. W załącznikach ustawienia simka.
You do not have the required permissions to view the files attached to this post.
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.2 X

Post by Martin_Starski »

d3p3k wrote: Wednesday 24 Jun 2020, 09:06 ponieważ to świeża instalacja, lotniska EPZG, EPLL, EPSC
A nad-instalowywales moze na starej wersji?

Tam byly pliki z odbiciem wody na mokrym pasie, np. pliki z "rain" w nazwie, np. EPSCv3_Rain.BGL - masz moze takie plik w folderze scenerii?

Mozesz ewentualnie wykonac jeszcze raz czysta instalacje? Czyli skrotowo ujmujac - usunac stosowne plik xml z Documents, usunac stosowny folder paczki z Addon Scenery, wzglednie usunac tez stosowne pliki z SODE, potem odpalic instalator jako admin i ponownie zainstalowac paczke.
d3p3k
5-12 posts
5-12 posts
Posts: 6
Joined: Tuesday 23 Jun 2020, 22:23
Name: Dominik

Re: Polish Airports vol.2 X

Post by d3p3k »

Za każdy razem usuwałem scenerię z p3dv4 addon, addon scenery, wywalałem sode i instalowałem z praw admina. Spróbuje wywalić te pliki odpowiedzialne za deszcz. Zobaczę jaki będzie efekt.
d3p3k
5-12 posts
5-12 posts
Posts: 6
Joined: Tuesday 23 Jun 2020, 22:23
Name: Dominik

Re: Polish Airports vol.2 X

Post by d3p3k »

Super. Po wyłączeniu plików rain.bgl na wszystkich lotniskach efekt zniknął =) Teraz pozostaje mi tylko zabawa ustawieniami graficznymi. Mam włączony HDR co skutkuje tym, że między g. 12-13 prawie zupełnie nie widać oznaczeń pasa. Zlewają się z teksturą betonu tworząc biały pas. Bardzo dziękuję za sugestię. Na ten moment myślę śmiało mogę latać do Zielonej Góry nocą. Dzięki, pozdrawiam:)
You do not have the required permissions to view the files attached to this post.
kranck
2-4 posts
2-4 posts
Posts: 3
Joined: Friday 09 Aug 2019, 16:13
Name: Norbert

Re: Polish Airports vol.2 X

Post by kranck »

Hello,

the ground texture of the Polish airports may match the P3D standard textures or other, at least not the usual ORBX-FTX textures. If using ORBX, the airports are in a square, ugly area that stands out from the rest, see my screenshot of EPLL. Can that be changed? Are the Polish Airports compatible with ORBX FTX? I did not find any information in the installation routine or in the manual.

Thanks for help,
regards

Norbert
You do not have the required permissions to view the files attached to this post.
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: Polish Airports vol.2 X

Post by Martin_Starski »

This scenery doesn't match ORBX colours indeed.

You may try to disable the bgl files which has the biggest size to remove our photoground. I'm not fully sure if we will be able to easily change something in the next update of this package, but for example in Tokyo Narita scenery we added the option of ORBX Global BASE color range blending.
sholay
13-25 posts
13-25 posts
Posts: 15
Joined: Saturday 02 Nov 2019, 17:05
Name: Sholay

Re: Polish Airports vol.2 X

Post by sholay »

Przepraszam, ale nie rozumiem.
Czy PA vol. 1, vol. 2 i vol. 3 działają w P3D v5?
Myślałem, że tylko vol. 1 ma płatny upgrade do P3D V5?

&
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Re: Polish Airports vol.2 X

Post by DD Stanislaw »

Wszystkie nasze produkty działają w P3Dv5.
Image
sholay
13-25 posts
13-25 posts
Posts: 15
Joined: Saturday 02 Nov 2019, 17:05
Name: Sholay

Re: Polish Airports vol.2 X

Post by sholay »

Świetna wiadomość, dziękuję.
W takim razie muszę zagaić w innym wątku, bo akurat PA vol. 1 w wersji 4.6 nie ma u mnie radio buttona dla P3D V%.

&
Post Reply