UUEE Moscow Sheremetyevo X V2
Latest version: v2.3 (2020)
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
SODE error on start of P3D 2.5
Hey,
I bought Moscow Sheremetyevo for P3D today and now I can't even launch my P3D 2.5 simultor anymore. Because when I load up P3D it gives me an error message saying that Simobjects Display Engine stopped working. Then P3D tells me "P3D cannot find the aircraft for the requested flight. The default aircraft will now try to load" Then it tells me that I should reintall P3D.
"Prepar3D cannot find the default aircraft files. Please reinstall Prepar3D"
Any fix for this because I wanna fly, but now I got this error and I really look forward to your Moscow scenery. But can't as it crashes before P3D launched up after I double clicked the Prepar3D 2 shortcut in my start menu.
Thanks
Erik
I bought Moscow Sheremetyevo for P3D today and now I can't even launch my P3D 2.5 simultor anymore. Because when I load up P3D it gives me an error message saying that Simobjects Display Engine stopped working. Then P3D tells me "P3D cannot find the aircraft for the requested flight. The default aircraft will now try to load" Then it tells me that I should reintall P3D.
"Prepar3D cannot find the default aircraft files. Please reinstall Prepar3D"
Any fix for this because I wanna fly, but now I got this error and I really look forward to your Moscow scenery. But can't as it crashes before P3D launched up after I double clicked the Prepar3D 2 shortcut in my start menu.
Thanks
Erik
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hello Erik.
It means that you are loading your sim using a default flight saved with an aircraft not presenting in your aircraft library any more. It has nothing to do with our product. I would reccomend you contacting the P3D support about that or simply searching for a solution on general discussion boards.
It means that you are loading your sim using a default flight saved with an aircraft not presenting in your aircraft library any more. It has nothing to do with our product. I would reccomend you contacting the P3D support about that or simply searching for a solution on general discussion boards.
Hello DD Stanislaw,
Well, the problem is that SODE is not compatible with Prepar3D, because if it was it would work.
/Erik
[edit -SD]
Error message:
Well, the problem is that SODE is not compatible with Prepar3D, because if it was it would work.
/Erik
[edit -SD]
Error message:
Code: Select all
Problem signature:
Problem Event Name: APPCRASH
Application Name: SimObjectDisplayEngine.exe
Application Version: 1.0.4.0
Application Timestamp: 00050000
Fault Module Name: SimObjectDisplayEngine.exe
Fault Module Version: 1.0.4.0
Fault Module Timestamp: 00050000
Exception Code: c0000005
Exception Offset: 0000bff7
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1053
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Well, this is the only way of getting a payware product, right?erikac wrote:I have payed for your scenery
This is the first time a customer is reporting a P3D crash after installing our UUEE product, although both our product and P3D v2.5 are available for quite a long time - so my logical guess is that the problem is related to your particular software setup, not the product itself. Otherwise it would happen to every customer using our UUEE airport under P3D v2.5 , which does not occur.
As for your description I am afraid I am not able to solve the problem, which does not seem to be a standard one.
Hello!
I'm relatively new to this forum, so I suppose I may not be posting this in the correct place, but I just wanted to say great job on the scenery; it looks lovely!
Though I do have one recommendation; would it be possible to see apron lights being visible from 6000'-ish for the next update? I was mostly hoping that could be done since most arrivals to Sheremetyevo seem to overfly the airport then turn onto downwind, and it would be pretty cool to get a visual like this:
Just a suggestion, nothing deal-breaking though; the scenery's wonderful!
I'm relatively new to this forum, so I suppose I may not be posting this in the correct place, but I just wanted to say great job on the scenery; it looks lovely!
Though I do have one recommendation; would it be possible to see apron lights being visible from 6000'-ish for the next update? I was mostly hoping that could be done since most arrivals to Sheremetyevo seem to overfly the airport then turn onto downwind, and it would be pretty cool to get a visual like this:
Just a suggestion, nothing deal-breaking though; the scenery's wonderful!
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
-
- 26-49 posts
- Posts: 49
- Joined: Sunday 22 Sep 2013, 08:29
- Location: Switzerland
Ground flickering
Hi
After I switched over to FSX several month ago, I installed the current version of UUEE.
If I depart out of UUEE, everything is fine. If I fly inbound from another Airport, the ground begins to flickering, just bevor touch down.
-I never had and do not have another Scenery for UUEE activated or installed.
-There is not a second AFCAD for UUEE (checked it wiht a tool).
-I use ORBX Global, Vector and Open LC and I used the Airport Elevation Correction from Vector.
Any suggestions? With this issue, I can not fly in to UUEE.
Kind Regards
Patrick
After I switched over to FSX several month ago, I installed the current version of UUEE.
If I depart out of UUEE, everything is fine. If I fly inbound from another Airport, the ground begins to flickering, just bevor touch down.
-I never had and do not have another Scenery for UUEE activated or installed.
-There is not a second AFCAD for UUEE (checked it wiht a tool).
-I use ORBX Global, Vector and Open LC and I used the Airport Elevation Correction from Vector.
Any suggestions? With this issue, I can not fly in to UUEE.
Kind Regards
Patrick
Best Regards
Patrick
Patrick
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
-
- 26-49 posts
- Posts: 49
- Joined: Sunday 22 Sep 2013, 08:29
- Location: Switzerland
- DD Stanislaw
- Administrator
- Posts: 6260
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
The B terminal has been demolished. Unfortunately you cannot remove just that terminal from our product but you can make it invisible (which is not a perfect solution but... it makes it invisible, which might work as a temporary solution). Here are the files:
UUEE Moscow Sheremetyevo 2015 - removal of B terminal
UUEE Moscow Sheremetyevo X - removal of B terminal
To install the fix simply put 2 texture files into the Texture folder of the product (overwrite older files).
UUEE Moscow Sheremetyevo 2015 - removal of B terminal
UUEE Moscow Sheremetyevo X - removal of B terminal
To install the fix simply put 2 texture files into the Texture folder of the product (overwrite older files).
- phantomflyer
- 5-12 posts
- Posts: 12
- Joined: Tuesday 01 Sep 2015, 12:30
- Location: Australia
SODE quick question
Hello folks,
Firstly - I love all your work! UUEE (and all your other products) is amazing and is faultless in FSX.
I only have one question regarding the SODE key combination. I use SHIFT+MINUS to zoom out of my virtual cockpits and other views (over wings, etc). The small "problem" (inconvenience really) I have is that I would love to be able to change the SODE default key combination to something other than SHIFT+MINUS.
Can you tell me if and how I can edit it? You can be technical here as I am very computer literate.
Thanks in advance,
Bill
Firstly - I love all your work! UUEE (and all your other products) is amazing and is faultless in FSX.
I only have one question regarding the SODE key combination. I use SHIFT+MINUS to zoom out of my virtual cockpits and other views (over wings, etc). The small "problem" (inconvenience really) I have is that I would love to be able to change the SODE default key combination to something other than SHIFT+MINUS.
Can you tell me if and how I can edit it? You can be technical here as I am very computer literate.
Thanks in advance,
Bill
If it works, try not to fix it