NY Airports v2 X

Latest version: v2.6 (2020)

Post Reply
B744F
13-25 posts
13-25 posts
Posts: 19
Joined: Tuesday 30 Jun 2020, 02:28
Name: David

Re: NY Airports v2 X

Post by B744F »

Martin

Do you have a mesh I use fs global 2020 and 2m mesh p3d setting. I fall through in a PMDG plane in the bridge on the taxiways each time
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: NY Airports v2 X

Post by Martin_Starski »

Bridges are very sensitive to the mesh setting and thus it can be the case. Have you tried to check if there is no issue with inactive FS global? Have you tried max mesh setting?
B744F
13-25 posts
13-25 posts
Posts: 19
Joined: Tuesday 30 Jun 2020, 02:28
Name: David

Re: NY Airports v2 X

Post by B744F »

Unable 1m mesh causing holes in scenery and spikes in FSDreamteam. I can deactivate the Mesh and try, in P3D v4 I did have problems in the Chicago bridge taxiways over the road but not at JFK. IN P3D v5 I have issues in JFK I have not flown in Chicago yet. I read FlyTampa forums about the new Amsterdam and there are similar scenery terrain mesh issues some people but not all are having.
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: NY Airports v2 X

Post by Martin_Starski »

B744F wrote: Wednesday 13 Jan 2021, 02:09 but not all are having.
That's the key - something has to make a difference. It would be nice if you could deactive fsglobal / mesh addon and check.
B744F wrote: Wednesday 13 Jan 2021, 02:09 Unable 1m mesh causing holes
But just for testing purposes - is it possible to check?
B744F
13-25 posts
13-25 posts
Posts: 19
Joined: Tuesday 30 Jun 2020, 02:28
Name: David

Re: NY Airports v2 X

Post by B744F »

Okay testing time is limited I hoped I could explain in some detail and get an answer. I will in a few days try different methods 1m mesh and no addon mesh and reply.
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: NY Airports v2 X

Post by Martin_Starski »

Thanks in advance for your support!
DirtyF16
5-12 posts
5-12 posts
Posts: 9
Joined: Saturday 16 Jan 2021, 15:37
Name: Danny

Re: NY Airports v2 X

Post by DirtyF16 »

Hello,

After a night flight and landing at dusk, I noticed a HUGE performance hit when my aircraft was close to or under the terminal lights. What is causing this and how can I "turn down" the lights as to avoid such a HUGE performance hit? This is the only scenery that acts likes this...thank you.

Love the scenery otherwise! Own multiple!!
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: NY Airports v2 X

Post by Martin_Starski »

Which airport are you talking about?
Are you talking about P3D v4.5 or P3D v5.1?
What do you mean by the "HUGE performance hit"? What are your PC specs and sim settings? Do you mean dynamic lighting?
We need much more details, because otherwise it's hard to say something more - so far many users claim that our scenery is very fps-friendly and they love our night lighting (see customer reviews in Simmarket for instance).
DirtyF16
5-12 posts
5-12 posts
Posts: 9
Joined: Saturday 16 Jan 2021, 15:37
Name: Danny

Re: NY Airports v2 X

Post by DirtyF16 »

Sorry, should have included that info.

KEWR, P3Dv4.5, fps drop to low single digits. High-end PC with settings on high/ultra high. and I mean dynamic lighting.
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: NY Airports v2 X

Post by Martin_Starski »

But drop is general to the whole KEWR airport or only in the specific locations? Have you tested it without DL - is there any difference for you? Any other addons in this area? Have you played with your sim settings - is there any difference?

It is still hard to say something "smart" without viewing the actual results (like screenshots or FPS graphs), without knowing your exact sim settings or PC specs. I'm not able to replicate it on my clean install with medium settings - I'm able to reach good FPS. Such significant drop can only be done by failures in the sim configuration or failed 3rd-party content configuration, which can interfere with our scenery.
moneysniper02
0-1 posts
0-1 posts
Posts: 1
Joined: Saturday 06 Feb 2021, 01:47
Name: moneysniper02

Re: NY Airports v2 X

Post by moneysniper02 »

What should I do with this situation? Thanks!! I need help.
You do not have the required permissions to view the files attached to this post.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Re: NY Airports v2 X

Post by DD Stanislaw »

Hi. This is the folder our installer is trying to install files to. If the folder name is incorrect (seems like it), please check registry entries for your P3Dv4.

Prepar3Dv4:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lockheed Martin\Prepar3D v4 - key name is "SetupPath"
or
HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v4 - key name is "SetupPath"
or
HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4 - key name is "AppPath"
Image
Jerrymc3
13-25 posts
13-25 posts
Posts: 16
Joined: Monday 30 Sep 2019, 22:53
Name: Jerry
Location: Dallas, Texas

Re: NY Airports v2 X

Post by Jerrymc3 »

I just purchased NY AIRPORTS v2 X: KJFK, KLGA, KTEB. I have Imaginesim KLGA but I had to re-install P3Dv4.5 and I couldn't get the Sode jetways to show and I really wanted a current version anyway. I'm having the same problem with DRZEWIECKI's airport. No jetways.
User avatar
DD Stanislaw
Administrator
Administrator
Posts: 6260
Joined: Monday 15 May 2006, 10:07
Name: Stanisław
Location: Warsaw, Poland

Re: NY Airports v2 X

Post by DD Stanislaw »

Hi. If there are no jetways it means that SODE is not working correctly. Please try reinstalling SODE.
https://www.dropbox.com/s/0u5jptygmoopv ... t.msi?dl=1
Image
User avatar
Martin_Starski
200+ posts
200+ posts
Posts: 3365
Joined: Monday 24 Sep 2012, 11:11
Name: Marcin
Location: Warszawa

Re: NY Airports v2 X

Post by Martin_Starski »

Please also check if SODE is registered and if there is a required simconnect - everything is described in the SODE user guide available here: https://sode.12bpilot.ch/?page_id=9
Post Reply