NY Airports v2 X
Latest version: v2.6 (2020)
-
- 2-4 posts
- Posts: 3
- Joined: Wednesday 18 Jul 2018, 02:09
- Name: Chris
Re: NY Airports v2 X
This is in P3D 4.3.
I didn't have much time to test last night but I was seemingly able to avoid the freezing/CTD in the one preflight I was able run (as compared to the previous night's testing where all 5-6 I tried ended up crashing at some point). This time was with the NYC X "lite" textures installed. Performance was still a little lacking, but I haven't quite found the sweet spot in my settings anyway as this is a new reinstallation of P3D on a new OS (win 10) and a new GPU.
I think I'm most likely overloading the sim. It also wouldn't surprise me if the feelThere E190 is more susceptible to these problems as I would assume it's rather poorly optimized and not fully SDK-compliant as I believe the new 64-bit version is just a straight port from the 32-bit. I'll retry the hi-res textures with something new like the Aerosoft A319 and see if I run into the same issue. One variable at a time!
I haven't tried reinstalling without KJFK activated in the installer, although as I said at the end of my last post, I had tried installing just KJFK and it still installed all 3 airports anyway.
I didn't have much time to test last night but I was seemingly able to avoid the freezing/CTD in the one preflight I was able run (as compared to the previous night's testing where all 5-6 I tried ended up crashing at some point). This time was with the NYC X "lite" textures installed. Performance was still a little lacking, but I haven't quite found the sweet spot in my settings anyway as this is a new reinstallation of P3D on a new OS (win 10) and a new GPU.
I think I'm most likely overloading the sim. It also wouldn't surprise me if the feelThere E190 is more susceptible to these problems as I would assume it's rather poorly optimized and not fully SDK-compliant as I believe the new 64-bit version is just a straight port from the 32-bit. I'll retry the hi-res textures with something new like the Aerosoft A319 and see if I run into the same issue. One variable at a time!
I haven't tried reinstalling without KJFK activated in the installer, although as I said at the end of my last post, I had tried installing just KJFK and it still installed all 3 airports anyway.
-
- 5-12 posts
- Posts: 10
- Joined: Saturday 21 Jul 2018, 19:46
- Name: ViggoEdbom
Hello!
I'm searching your help here because there seems to be a conflict between LGA and default scenery in Prepar3D v4.3. I have a couple of screenshots where the first one is showing default buildings on the airport area and the second one where you can see that half of the parking lot has been replaced with default textures:
I'm searching your help here because there seems to be a conflict between LGA and default scenery in Prepar3D v4.3. I have a couple of screenshots where the first one is showing default buildings on the airport area and the second one where you can see that half of the parking lot has been replaced with default textures:
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hello.
Neither of them worked. You may use http://s1306.photobucket.com/ to upload them (for example).
Neither of them worked. You may use http://s1306.photobucket.com/ to upload them (for example).
-
- 5-12 posts
- Posts: 10
- Joined: Saturday 21 Jul 2018, 19:46
- Name: ViggoEdbom
Re: NY Airports v2 X
Will try it once I get home from my trip to Norway.
-
- 5-12 posts
- Posts: 10
- Joined: Saturday 21 Jul 2018, 19:46
- Name: ViggoEdbom
Re: NY Airports v2 X
I have a couple of screenshots where the first one is showing default buildings on the airport area and the second one where you can see that half of the parking lot has been replaced with default textures:
https://imgur.com/p2VPHkP
https://imgur.com/n31qAaR
https://imgur.com/p2VPHkP
https://imgur.com/n31qAaR
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Please double-check if you use the newest version of both - NY Airports v2 and New York City v2.
-
- 5-12 posts
- Posts: 10
- Joined: Saturday 21 Jul 2018, 19:46
- Name: ViggoEdbom
Re: NY Airports v2 X
I downloaded KLGA-KJFK-KTEB v2 from Simmarket once again,and I also downloaded the DEMO version of New York City v2 and New York Airports v2 where I excluded LGA, JFK and TEB. No improvements. How do I check if I have the latest version of the products?
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi.
Everything seems to look fine on your 2 screenshots. Can you provide some details about what the problem is?
Everything seems to look fine on your 2 screenshots. Can you provide some details about what the problem is?
-
- 5-12 posts
- Posts: 10
- Joined: Saturday 21 Jul 2018, 19:46
- Name: ViggoEdbom
Re: NY Airports v2 X
There are default buildings on the apron area at the terminal- It shouldn't be like that, correct? And there are missing textures on the parking lot.
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
The parking lot textures are part of the NYC package but we will investigate why that autogen is displayed there (it definitely shouldn't).
-
- 5-12 posts
- Posts: 10
- Joined: Saturday 21 Jul 2018, 19:46
- Name: ViggoEdbom
Re: NY Airports v2 X
Appreciated!
Ps. If it is to any help, I have ORBX Global, Vector and OpenLC NA installed into Prepar3D v4.3.
Ps. If it is to any help, I have ORBX Global, Vector and OpenLC NA installed into Prepar3D v4.3.
Re: NY Airports v2 X
I am having an issue with the jetways at EWR aligning with the proper door on the QW757. It should be going to L2, like in all other sceneries, but instead it goes to L1. Any idea how to make it go to the proper door? Thank you.
-
- 2-4 posts
- Posts: 3
- Joined: Tuesday 07 Aug 2018, 19:54
- Name: Danny
Re: NY Airports v2 X
I just bought this package and enabled it upon startup of P3Dv4. All 3 airports (KJFK, KLGA and KTEB) do not have any buildings!
I reinstalled the package as administrator, checked if it's being added in my Scenery Library... At first it didn't but at the second time it did.
Still when I load up the scenery, the ground is all flat! There are only textures, but no buildings or scenery and I only see the jetways!
Please don't let my 22 euros be gone and help me out over here Drzewiecki Design!
I reinstalled the package as administrator, checked if it's being added in my Scenery Library... At first it didn't but at the second time it did.
Still when I load up the scenery, the ground is all flat! There are only textures, but no buildings or scenery and I only see the jetways!
Please don't let my 22 euros be gone and help me out over here Drzewiecki Design!
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi.
Please go into the Scenery Library and remove the dublicated entries of our NY package (one is probably greyed-out and one just a standard entry).
What do you mean by "enabled"?goldenshark wrote: ↑Tuesday 07 Aug 2018, 20:06 I just bought this package and enabled it upon startup of P3Dv4.
Please go into the Scenery Library and remove the dublicated entries of our NY package (one is probably greyed-out and one just a standard entry).
Why do you think they might possibly be gone? Have you had such an experience before?
-
- 2-4 posts
- Posts: 3
- Joined: Tuesday 07 Aug 2018, 19:54
- Name: Danny
Re: NY Airports v2 X
Good morning,
Thanks for your reply.
You know, it's just my opinion but if there is a scenery being published, it is to expect that the scenery actually works after installation, especially when one bought the product.
This issue has been reported several times by other simmers that I've read on several forums.
We simmers are somewhat technical minded to solve these problems but not all simmers do have that knowledge, they just want to have fun in flying their wanted product they've just bought.
I hope you could understand.
Anyway, I managed to get the sceneries to work with ticking the "install static aircraft" during installation which I definately don't want to have because I always fly online.
Is there any way to install the scenery without any problems at all without the static aircraft installed?
Thanks for your reply.
It's known that you will get a prompt message upon startup of P3D to enable the addon "NY Airports" after a fresh installation of those airports, right?What do you mean by "enabled"?
Uhmm yep...Why do you think they might possibly be gone? Have you had such an experience before?
You know, it's just my opinion but if there is a scenery being published, it is to expect that the scenery actually works after installation, especially when one bought the product.
This issue has been reported several times by other simmers that I've read on several forums.
We simmers are somewhat technical minded to solve these problems but not all simmers do have that knowledge, they just want to have fun in flying their wanted product they've just bought.
I hope you could understand.
Anyway, I managed to get the sceneries to work with ticking the "install static aircraft" during installation which I definately don't want to have because I always fly online.
Is there any way to install the scenery without any problems at all without the static aircraft installed?