Seattle Airports X
Latest version: v1.4 (2020)
-
- 2-4 posts
- Posts: 3
- Joined: Thursday 07 Mar 2019, 11:53
- Name: Lars
Re: Seattle Airports X
Hi,
approaching runway 16C at KSEA I noticed that the ILS (ISZI 111.7) is not there, it doesn't work. The ILS of the opposing runway 34C (ITUC 111.7) however works.
I have Orbx PNW, Vector, OLC NA and Global installed and have removed all Orbx files from the corresponding DD Seattle X airports. Checking KSEA's AFCAD with ADE reveals that all ILS beams are present in the file. Why not in the sim?
I opened a topic in the Orbx forum, but apparently it has nothing to do with Orbx. There have been known compatibility issues with Taxi2Gate's version of the airport, but none with DD's. I have no airport installed there for KSEA other than the default one.
Cheers
Lars
approaching runway 16C at KSEA I noticed that the ILS (ISZI 111.7) is not there, it doesn't work. The ILS of the opposing runway 34C (ITUC 111.7) however works.
I have Orbx PNW, Vector, OLC NA and Global installed and have removed all Orbx files from the corresponding DD Seattle X airports. Checking KSEA's AFCAD with ADE reveals that all ILS beams are present in the file. Why not in the sim?
I opened a topic in the Orbx forum, but apparently it has nothing to do with Orbx. There have been known compatibility issues with Taxi2Gate's version of the airport, but none with DD's. I have no airport installed there for KSEA other than the default one.
Cheers
Lars
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
Maybe duplicated AFCADs or conflict with other addon?DD Stanislaw wrote: Hi!
All instrument approaches are present in the AFD file.
Is DD scenery on the top of library?
What sim are you using? Maybe I'm wrong but KSEA didn't have a center runway in the simulator's default scenery, but only two runways, left and right. So there might be a conflict somwhere here but it's only my presumption.
-
- 2-4 posts
- Posts: 3
- Joined: Thursday 07 Mar 2019, 11:53
- Name: Lars
Re: Seattle Airports X
No. The ILS is absent, no matter if Orbx PNW is active or not.Maybe duplicated AFCADs or conflict with other addon?
Yes.Is DD scenery on the top of library?
P3D v4.4What sim are you using?
The default KSEA one has only two runways, but 16C is one of them. They are labelled 16L and 16C, judging by an inspection with ADE.Maybe I'm wrong but KSEA didn't have a center runway in the simulator's default scenery, but only two runways, left and right. So there might be a conflict somwhere here but it's only my presumption.
-
- 2-4 posts
- Posts: 3
- Joined: Thursday 07 Mar 2019, 11:53
- Name: Lars
Re: Seattle Airports X
I guess your quietness on this matter means that you don't have a solution either.
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
Lars, what can I say you more - I showed you that ILS 16C is the part of our scenery.
In order to prove it to you, below you may see the screenshot from my sim (sorry for a poor quality) showing the approach via ILS to rwy 16C, which is working without any problems.
hostingi zdjęć
It has to be something very specific to your config / sim / addons. You wrote that you tried our scenery with inactive ORBX FTX PNW, but somewhere I read that in case of the T2G scenery some users had the similar problem and it was related to the compatibility issues with ORBX FTX PNW. Some compatibility issues probably may be solved via this thread: https://orbxsystems.com/forum/topic/105 ... ity-guide/
One user solved the problem after doing the step 8 mentioned there. Maybe you may try it again - otherwise I cannot find any good reason why ILS 16C is not working in your case.
In order to prove it to you, below you may see the screenshot from my sim (sorry for a poor quality) showing the approach via ILS to rwy 16C, which is working without any problems.
hostingi zdjęć
It has to be something very specific to your config / sim / addons. You wrote that you tried our scenery with inactive ORBX FTX PNW, but somewhere I read that in case of the T2G scenery some users had the similar problem and it was related to the compatibility issues with ORBX FTX PNW. Some compatibility issues probably may be solved via this thread: https://orbxsystems.com/forum/topic/105 ... ity-guide/
One user solved the problem after doing the step 8 mentioned there. Maybe you may try it again - otherwise I cannot find any good reason why ILS 16C is not working in your case.
-
- 2-4 posts
- Posts: 2
- Joined: Tuesday 19 Mar 2019, 19:17
- Name: Graeme
Re: Seattle Airports X
For UTX USA users with elevation issues at KPAE, rather than deactivate UTX or the whole of the 'exclusions for default scenery' folder, you can deactivate just two files inside that folder. Keeping the main UTX 'exclusions' folder active in scenery library will prevent issues in other parts of the USA.
This is for P3Dv4, but I expect install location is same in FSX
To disable the two files, navigate to
main sim folder/scenery/UtExcl/scenery
Locate the two files
HPU1514U.BGL
int1514U.BGL
Rename from .bgl to .off, or remove them to a backup location.
Restart sim and you should not have the runway trenches at KPAE.
I do not have ORBX in the area, so not sure if that also creates issue to be solved.
This is for P3Dv4, but I expect install location is same in FSX
To disable the two files, navigate to
main sim folder/scenery/UtExcl/scenery
Locate the two files
HPU1514U.BGL
int1514U.BGL
Rename from .bgl to .off, or remove them to a backup location.
Restart sim and you should not have the runway trenches at KPAE.
I do not have ORBX in the area, so not sure if that also creates issue to be solved.
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
-
- 2-4 posts
- Posts: 2
- Joined: Tuesday 19 Mar 2019, 19:17
- Name: Graeme
Re: Seattle Airports X
Welcome.
The level of detail at KPAE is insane.
I disabled static aircraft at first, but there is so little AI traffic using the airport that I re-enabled, and understood what it is about. Weird mix of livery and bare metal waiting for final test flights.
Pretty location too.
You should make your dreamlifter model AI-able. Be great to see it shuttling about with a simple flightplan.
The level of detail at KPAE is insane.
I disabled static aircraft at first, but there is so little AI traffic using the airport that I re-enabled, and understood what it is about. Weird mix of livery and bare metal waiting for final test flights.
Pretty location too.
You should make your dreamlifter model AI-able. Be great to see it shuttling about with a simple flightplan.
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
Good day, thank you for the great products. I am having an issue with KSEA, the gates show but not the airport.
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
Have you tried to reinstall the scenery with admin rights - if not, please try it.
It's also possible that for this scenery you have double entries in the Scenery Library (probably one will be greyed-out and one available to remove) - there should be only one, so please check this.
It's also possible that for this scenery you have double entries in the Scenery Library (probably one will be greyed-out and one available to remove) - there should be only one, so please check this.
Re: Seattle Airports X
Just purchased Seattle airports when i try to download it tells me setup can not create the following folder \addon scenery\Seattle X\Documents. Can someone please help. THX
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
Hi! Honestly speaking I need some more clarification, because from your post it's not easy to determine where the problem is.
What is the path for this installation process?
Have you started our installer with admin rights?
In which sim are you trying to install our scenery?
I understand that you downloaded our installer and started the setup, right? From which store have you downloaded it?
Can you show this error via screenshot? (you may use this to show it: https://imgbb.com)
What is the path for this installation process?
Have you started our installer with admin rights?
In which sim are you trying to install our scenery?
Re: Seattle Airports X
Is there a step by step process for installing Seattle Airports and Seattle City. After reading 37 pages of elevation issues it's almost seems pointless for me to trying and reinstall my scenery and city. I have Orbx installed but I don't use PNW. Just looking for a straight forward guide if I'm using both Seattle products and Orbx North America LC and Vectors.
Re: Seattle Airports X
I yesterday installed SA X. Very good fps at night and during the day, about 40 fps with graphics rather high. Only at DUSK framerate drops to about 10 fps, no matter the graphic sliders to low. Strange.
I5-9600K RTX 2080 16 GB DDR4
I5-9600K RTX 2080 16 GB DDR4