EPKK Kraków Balice X v3
Latest version: v3.2 (2020)
-
- 5-12 posts
- Posts: 12
- Joined: Saturday 19 Jan 2019, 14:19
- Name: Mike
Re: EPKK Kraków Balice X v2
Any news about that issue?
Mike
Mike
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: EPKK Kraków Balice X v2
We had a similar issue in our latest vol.1 update it we managed to fix it so I believe fixing that one in EPKK would also be possible.
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: EPKK Kraków Balice X v2
Hi, can you check this fix please?
Please unzip the attached file and copy it to: C:\ProgramData\12bPilot\SODE\SimObjects\DrzewieckiDesign_EPKK_v2 (replace the existing ones)
Please unzip the attached file and copy it to: C:\ProgramData\12bPilot\SODE\SimObjects\DrzewieckiDesign_EPKK_v2 (replace the existing ones)
You do not have the required permissions to view the files attached to this post.
-
- 5-12 posts
- Posts: 12
- Joined: Saturday 19 Jan 2019, 14:19
- Name: Mike
Re: EPKK Kraków Balice X v2
Hi Martin,
works better. In my opinion it is a little bit to close to the door.
Tested with PMDG B737-900 -700 and FSL A320.
Mike
works better. In my opinion it is a little bit to close to the door.
Tested with PMDG B737-900 -700 and FSL A320.
Mike
You do not have the required permissions to view the files attached to this post.
-
- 5-12 posts
- Posts: 12
- Joined: Saturday 19 Jan 2019, 14:19
- Name: Mike
Re: EPKK Kraków Balice X v2
part 2
You do not have the required permissions to view the files attached to this post.
-
- 2-4 posts
- Posts: 2
- Joined: Tuesday 03 Sep 2019, 13:32
- Name: Grzesiek
Re: EPKK Kraków Balice X v2
Witam.Mam oto taki problem na scenerii EPKK V2 . Nie ma oświetlenia na lotnisku a konkretnie na podejściu i pasie startowym. Wygląda jak by się bardzo słabo świeciło. FSX SE. Posiadam inne scenerie EPWA,oraz wszystkie PoA v1,2,3 i tam wszystko jest ok. Przesyłam załącznik.
You do not have the required permissions to view the files attached to this post.
-
- 2-4 posts
- Posts: 2
- Joined: Tuesday 03 Sep 2019, 13:32
- Name: Grzesiek
Re: EPKK Kraków Balice X v2
Problem nieaktualny. Reinstalacja SODE pomogła. A swoją drogą ciekawe czemu na innych lotniskach bez SODE jest oświetlenie a na EPKK nie.
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: EPKK Kraków Balice X v2
Witam.
W EPKK oświetlenie zrobione jest inną techniką i sterowane przez SODE. Dzięki temu działa ono m.in. w oparciu o warunki pogodowe (opady/widzialność). Na dany moment działa chyba tak w całej serii PA.
W EPKK oświetlenie zrobione jest inną techniką i sterowane przez SODE. Dzięki temu działa ono m.in. w oparciu o warunki pogodowe (opady/widzialność). Na dany moment działa chyba tak w całej serii PA.
Re: EPKK Kraków Balice X v2
hey, at every DDs airport scenery i cant see terminals and other builidings, just jetbridges. I tried reinstalling. Im using p3d v4 and i have all polish airports bought. In scenery library i have only one time saved every airport and its "locked" (?) i cant delete it.
Greetings,
Oskar
Greetings,
Oskar
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: EPKK Kraków Balice X v2
In case if missing buildings please go to the Scenery Library and if you find any entries related to Kraków, please manually remove them.
Due to some unknown reasons sometimes the scenery is added via both XML file and in Scenery Library. In P3D v4 there should be only the one by XML and no entry in the Scenery library.
To uninstall the scenery in P3Dv4 you need to remove the scenery folder including “add-on.xml” from My Documents\Prepar3D v4 Add-ons and remove the scenery folder from Addon Scenery folder located in main P3D folder.
Due to some unknown reasons sometimes the scenery is added via both XML file and in Scenery Library. In P3D v4 there should be only the one by XML and no entry in the Scenery library.
To uninstall the scenery in P3Dv4 you need to remove the scenery folder including “add-on.xml” from My Documents\Prepar3D v4 Add-ons and remove the scenery folder from Addon Scenery folder located in main P3D folder.
Re: EPKK Kraków Balice X v2
hye, thank you for fast reply.
I made it and its doesn`t worked... i tried to uninstall and delete this folder from my documents and install this again and the same result as earlier.
Don`t know what to do now...
I made it and its doesn`t worked... i tried to uninstall and delete this folder from my documents and install this again and the same result as earlier.
Don`t know what to do now...
Re: EPKK Kraków Balice X v2
I noticed now that in installer i have checked something like "custom global environment map" and when i unchecked it next time its check again (idk if you know what i mean)
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: EPKK Kraków Balice X v2
This option has nothing to do with your problem.
There are 2 ways to achieve this result:
1. Wrong or no entry in the Add-ons section
2. Dublicated entries for the scenery (f/e one in scenery.cfg and one in Add-ons).
Can you send the screenshot which shows the current status of EPKK in your sim and how it looks like in your scenery library?
You may double check if you have checked the correct scenery.cfg as there are few of them.
Can you please also provide me with the following files:
...\MyDocuments\Prepar3D v4 Add-ons\[name of the product]\information.cfg
...\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-on.cfg
As far as I remember, once our user reported that the similar problem had nothing to do with the scenery but with p3d configuration files. And he decided to follow the 'last resort' option and run the 'Delete Generated Files' script in the P3D root folder and then restored his original scenery.cfg (always do the backup of files) which fixed the problem. But be careful with this option - it's not something that I recommend and you are doing this is on your risk.
There are 2 ways to achieve this result:
1. Wrong or no entry in the Add-ons section
2. Dublicated entries for the scenery (f/e one in scenery.cfg and one in Add-ons).
Can you send the screenshot which shows the current status of EPKK in your sim and how it looks like in your scenery library?
You may double check if you have checked the correct scenery.cfg as there are few of them.
Can you please also provide me with the following files:
...\MyDocuments\Prepar3D v4 Add-ons\[name of the product]\information.cfg
...\AppData\Roaming\Lockheed Martin\Prepar3D v4\add-on.cfg
As far as I remember, once our user reported that the similar problem had nothing to do with the scenery but with p3d configuration files. And he decided to follow the 'last resort' option and run the 'Delete Generated Files' script in the P3D root folder and then restored his original scenery.cfg (always do the backup of files) which fixed the problem. But be careful with this option - it's not something that I recommend and you are doing this is on your risk.
Re: EPKK Kraków Balice X v2
https://prnt.sc/pcf3b8
https://prnt.sc/pcez30
https://prnt.sc/pcezh4
I hope there is all things that you need.
https://prnt.sc/pcez30
https://prnt.sc/pcezh4
I hope there is all things that you need.
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: EPKK Kraków Balice X v2
Honestly speaking based on the given information I'm not able to identify what causes the problem in your case. According to our knowledge it should be caused by double entries.
You didn't inform me if you have tried to remove the scenery and reinstall it with admin rights. Have you tried? After removing it have you seen a default one?
Can you show your whole scenery library?
You didn't inform me if you have tried to remove the scenery and reinstall it with admin rights. Have you tried? After removing it have you seen a default one?
Can you show your whole scenery library?