Seattle Airports X
Latest version: v1.4 (2020)
Re: Seattle Airports X
Hi, thanks but I tried Stan's suggestion and all it did was change the order in the library.. from 3rd to the top. I still have to re-load the library at Seattle to fix it.. other than that it is very nicely done scenery and good fps as well..
One thing though ,I dont know if it make a difference is the addon xml initially has no layer in it like the chicago xml
<SimBase.Document Type="AddOnXml" version="4,0" id="add-on">
<AddOn.Name>Seattle X</AddOn.Name>
<AddOn.Description>Seattle X</AddOn.Description>
<AddOn.Component>
<Category>Scenery</Category>
<Path>D:\Lockheed Martin\Prepar3D v4\Addon Scenery\Seattle X</Path>
<Name>Seattle X</Name>
</AddOn.Component>
</SimBase.Document>
--------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="utf-8"?>
<SimBase.Document Type="AddOnXml" version="4,0" id="add-on">
<AddOn.Name>Chicago X</AddOn.Name>
<AddOn.Description>Chicago X</AddOn.Description>
<AddOn.Component>
<Category>Scenery</Category>
<Path>D:\Lockheed Martin\Prepar3D v4\Addon Scenery\Chicago X</Path>
<Name>Chicago X</Name>
<Layer>232</Layer>
</AddOn.Component>
</SimBase.Document>
This morning I re-installed it by installing Seattle City first and then the Airports ,that why you dont see the 999 layer.. but end result is the same
Terry
One thing though ,I dont know if it make a difference is the addon xml initially has no layer in it like the chicago xml
<SimBase.Document Type="AddOnXml" version="4,0" id="add-on">
<AddOn.Name>Seattle X</AddOn.Name>
<AddOn.Description>Seattle X</AddOn.Description>
<AddOn.Component>
<Category>Scenery</Category>
<Path>D:\Lockheed Martin\Prepar3D v4\Addon Scenery\Seattle X</Path>
<Name>Seattle X</Name>
</AddOn.Component>
</SimBase.Document>
--------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="utf-8"?>
<SimBase.Document Type="AddOnXml" version="4,0" id="add-on">
<AddOn.Name>Chicago X</AddOn.Name>
<AddOn.Description>Chicago X</AddOn.Description>
<AddOn.Component>
<Category>Scenery</Category>
<Path>D:\Lockheed Martin\Prepar3D v4\Addon Scenery\Chicago X</Path>
<Name>Chicago X</Name>
<Layer>232</Layer>
</AddOn.Component>
</SimBase.Document>
This morning I re-installed it by installing Seattle City first and then the Airports ,that why you dont see the 999 layer.. but end result is the same
Terry
Re: Seattle Airports X
Did some more experimenting and by removing the file CVX_SEA_Vector it loads ok now .not sure what that file does, but didn't see anything amiss ,not to say their could be.. lots to see in this scenery
Terry
Terry
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Seattle Airports X
Hi. So the <Layer>***</Layer> is usually added by the sim automatically, but apparently, in some cases, it doesn't work correctly. During our tests Layer 999 solved compatibility issues with TrueEarth (overlapping satellite imagery, doubled buildings in KSEA, wrong mesh data in KSEA).
CVX_SEA_Vector includes all vector data for the whole Seattle area (custom mesh, exclusion zones, traffic lines etc).
CVX_SEA_Vector includes all vector data for the whole Seattle area (custom mesh, exclusion zones, traffic lines etc).
Re: Seattle Airports X
Ok , So what I did was create a folder and named it Seattle city and put the file CVX_SEA_Vector only in it and activated it in the library and I loaded the sim up a couple of times and it works good now without having to refresh the library every time I load the sim
Terry
Terry
-
- 26-49 posts
- Posts: 28
- Joined: Wednesday 22 May 2019, 21:16
- Name: udidwht
- Location: HB-Ca.,Seattle,Fujieda-Japan
Re: Seattle Airports X
Was wondering if the 737 issue I have has been looked at? (from page 56 thread)
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
I have a problem with two sets of Jetways appearing. Can someone help? Here's what I see:
https://imgur.com/a/D0xGSqq
https://imgur.com/a/D0xGSqq
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
It may be caused the other addon. Do you have GSX 2 or FTX NA Pacific Northwest?
For example for those having some missing gates and double jetways and having FTX NA Pacific Northwest, there was a suggestion to disable in ...\NA Pacific Northwest\ORBX\FTX_NA\FTX_NA_PNW05_SCENERY\scenery the below-mentioned files by adding (.off) to the end:
ADE_FTX_PNW_KSEA_Seattle-Tacoma_Intl.BGL
FTX_PNW_objects_KSEA_PLC.bgl
FTX_PNW_objects_KSEA_BCN_PLC.bgl
For example for those having some missing gates and double jetways and having FTX NA Pacific Northwest, there was a suggestion to disable in ...\NA Pacific Northwest\ORBX\FTX_NA\FTX_NA_PNW05_SCENERY\scenery the below-mentioned files by adding (.off) to the end:
ADE_FTX_PNW_KSEA_Seattle-Tacoma_Intl.BGL
FTX_PNW_objects_KSEA_PLC.bgl
FTX_PNW_objects_KSEA_BCN_PLC.bgl
Re: Seattle Airports X
Any word on fixing the taxiway signs in P3D v5? Thank you!
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Seattle Airports X
Does Paine field have the passenger terminal modeled? I can't seem to find the gate numbers for it in the sim.
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Seattle Airports X
For some reason I get two jetways at KSEA. How do I just get one SODE jetway? Thanks. Please see image https://imgur.com/a/1xm5JG5
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Seattle Airports X
There are many possible options: GSX2, doubled files in SODE or some other addons for the same location / region.
For example if you have FTX NA, please go the following location .../NA Pacific Northwest\ORBX\FTX_NA\FTX_NA_PNW05_SCENERY\scenery and disable the following files:
ADE_FTX_PNW_KSEA_Seattle-Tacoma_Intl.BGL
FTX_PNW_objects_KSEA_PLC.bgl
FTX_PNW_objects_KSEA_BCN_PLC.bgl
If you don't have FTX NA, please tell us more about your other addons. If you had any other KSEA in the past, it can be that some old files still remain in your sim. Then it's neccesary to identify them.
For example if you have FTX NA, please go the following location .../NA Pacific Northwest\ORBX\FTX_NA\FTX_NA_PNW05_SCENERY\scenery and disable the following files:
ADE_FTX_PNW_KSEA_Seattle-Tacoma_Intl.BGL
FTX_PNW_objects_KSEA_PLC.bgl
FTX_PNW_objects_KSEA_BCN_PLC.bgl
If you don't have FTX NA, please tell us more about your other addons. If you had any other KSEA in the past, it can be that some old files still remain in your sim. Then it's neccesary to identify them.
Re: Seattle Airports X
The Jetways at KPAE do not appear to work. The GSX menu just says "No Jetways Here". Is there any way to get them to work?