Polish Airports vol.2 X
Latest version: v4.5 (2020)
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Polish Airports vol.2 X
Aleksey, are you sure that you have installed our updated packages of PA vol.1 and PA vol.2, which are compatibile with P3D v5.
SimObjects are solely referenced by a “SimTitle”, which must be unique, otherwise it will result in undefined behaviour when there are duplicates. P3D v4 didn’t care about checking duplicate SimTitles, it has left this responsibility to the add-on developers. Apparently the new P3D v5 checks for duplicates and will issue error messages. That's why we solved such issues in our last updated versions adapted to P3D v5.
If you installed both last versions of PA vol.1 and PA vol.2, you may try to remove all files relating these packages from the SODE folder and reinstall our scenery again. Such error shouldn't take place then.
SimObjects are solely referenced by a “SimTitle”, which must be unique, otherwise it will result in undefined behaviour when there are duplicates. P3D v4 didn’t care about checking duplicate SimTitles, it has left this responsibility to the add-on developers. Apparently the new P3D v5 checks for duplicates and will issue error messages. That's why we solved such issues in our last updated versions adapted to P3D v5.
If you installed both last versions of PA vol.1 and PA vol.2, you may try to remove all files relating these packages from the SODE folder and reinstall our scenery again. Such error shouldn't take place then.
Re: Polish Airports vol.2 X
Thanks. I installed the new version in P3DV5 only PA Vol2 4.4, but I have the Polish airports package vol1 V4.6 installed for P3D V4 and it obviously won't be updated for P3DV5. In order for the error to go away for vol2 I need to buy a new version of Polish airports vol1 V5?
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Polish Airports vol.2 X
Yes, I suggest upgrading to PA vol1 v5, which is fully compatibile with P3D v5.
Re: Polish Airports vol.2 X
Witam.
Najnowsza wersja 4.4. W p3dv4.5 coś dziwnego dzieje się z pasem w nocy. Świeci jakby był pokryty lodem, dodatkowo nie widać oznaczeń dróg startowych i kołowania. Trzeba się przyglądać żeby je zobaczyć. Dyskwalifikuje to całkowicie lotnisko z latania nocą. Ten sam efekt jest na wszystkich lotniskach PA vol 2. Czy to normalne? Pozdrawiam serdecznie.
Najnowsza wersja 4.4. W p3dv4.5 coś dziwnego dzieje się z pasem w nocy. Świeci jakby był pokryty lodem, dodatkowo nie widać oznaczeń dróg startowych i kołowania. Trzeba się przyglądać żeby je zobaczyć. Dyskwalifikuje to całkowicie lotnisko z latania nocą. Ten sam efekt jest na wszystkich lotniskach PA vol 2. Czy to normalne? Pozdrawiam serdecznie.
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Polish Airports vol.2 X
To wygląda na warstwę z deszczem...
Rozumiem, że próbowaleś reinstalacji z uprawnieniami administratora?
Masz jakieś inne dodatki?
Gdzie umiejscowiona jest paczka PA vol.2 X w bibliotece?
Podeślij mi proszę tez screeny ustawień z symulatora - moze to nas tez do czegoś naprowadzi, bo jak do tej pory nikt nie zglaszał podobnych problemow
Tak dla całkowitej pewności - pobierz tez sobie pliki Effects do symulatora z tego wątku: http://drzewiecki-design.net/forum/view ... 469#p19908
Rozumiem, że próbowaleś reinstalacji z uprawnieniami administratora?
Masz jakieś inne dodatki?
Gdzie umiejscowiona jest paczka PA vol.2 X w bibliotece?
Podeślij mi proszę tez screeny ustawień z symulatora - moze to nas tez do czegoś naprowadzi, bo jak do tej pory nikt nie zglaszał podobnych problemow
Tak dla całkowitej pewności - pobierz tez sobie pliki Effects do symulatora z tego wątku: http://drzewiecki-design.net/forum/view ... 469#p19908
Re: Polish Airports vol.2 X
Jeżeli chodzi o dodatki to mam ich całkiem sporo. Orbx Base + OpenLC + Vector. Niebo: Active Sky + Asca. Ograniczając się do Polski: PA vol. 1,2,3, Warszawa + lotnisko, KrakówX. Envtex i cienie Tomatoshade. Instalator włączałem z uprawnieniami administratora. Jeżeli chodzi o umiejscowienie, ponieważ to świeża instalacja, lotniska EPZG, EPLL, EPSC. EPRA znajdują się na samej górze. Konstrukcja biblioteki wygląda mniej więcej tak: Scenerie --> Orbx airports and regions --> OpenLC --> Cała reszta --> Vector. W załącznikach ustawienia simka.
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Polish Airports vol.2 X
A nad-instalowywales moze na starej wersji?
Tam byly pliki z odbiciem wody na mokrym pasie, np. pliki z "rain" w nazwie, np. EPSCv3_Rain.BGL - masz moze takie plik w folderze scenerii?
Mozesz ewentualnie wykonac jeszcze raz czysta instalacje? Czyli skrotowo ujmujac - usunac stosowne plik xml z Documents, usunac stosowny folder paczki z Addon Scenery, wzglednie usunac tez stosowne pliki z SODE, potem odpalic instalator jako admin i ponownie zainstalowac paczke.
Re: Polish Airports vol.2 X
Za każdy razem usuwałem scenerię z p3dv4 addon, addon scenery, wywalałem sode i instalowałem z praw admina. Spróbuje wywalić te pliki odpowiedzialne za deszcz. Zobaczę jaki będzie efekt.
Re: Polish Airports vol.2 X
Super. Po wyłączeniu plików rain.bgl na wszystkich lotniskach efekt zniknął =) Teraz pozostaje mi tylko zabawa ustawieniami graficznymi. Mam włączony HDR co skutkuje tym, że między g. 12-13 prawie zupełnie nie widać oznaczeń pasa. Zlewają się z teksturą betonu tworząc biały pas. Bardzo dziękuję za sugestię. Na ten moment myślę śmiało mogę latać do Zielonej Góry nocą. Dzięki, pozdrawiam:)
You do not have the required permissions to view the files attached to this post.
Re: Polish Airports vol.2 X
Hello,
the ground texture of the Polish airports may match the P3D standard textures or other, at least not the usual ORBX-FTX textures. If using ORBX, the airports are in a square, ugly area that stands out from the rest, see my screenshot of EPLL. Can that be changed? Are the Polish Airports compatible with ORBX FTX? I did not find any information in the installation routine or in the manual.
Thanks for help,
regards
Norbert
the ground texture of the Polish airports may match the P3D standard textures or other, at least not the usual ORBX-FTX textures. If using ORBX, the airports are in a square, ugly area that stands out from the rest, see my screenshot of EPLL. Can that be changed? Are the Polish Airports compatible with ORBX FTX? I did not find any information in the installation routine or in the manual.
Thanks for help,
regards
Norbert
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Polish Airports vol.2 X
This scenery doesn't match ORBX colours indeed.
You may try to disable the bgl files which has the biggest size to remove our photoground. I'm not fully sure if we will be able to easily change something in the next update of this package, but for example in Tokyo Narita scenery we added the option of ORBX Global BASE color range blending.
You may try to disable the bgl files which has the biggest size to remove our photoground. I'm not fully sure if we will be able to easily change something in the next update of this package, but for example in Tokyo Narita scenery we added the option of ORBX Global BASE color range blending.
Re: Polish Airports vol.2 X
Przepraszam, ale nie rozumiem.
Czy PA vol. 1, vol. 2 i vol. 3 działają w P3D v5?
Myślałem, że tylko vol. 1 ma płatny upgrade do P3D V5?
&
Czy PA vol. 1, vol. 2 i vol. 3 działają w P3D v5?
Myślałem, że tylko vol. 1 ma płatny upgrade do P3D V5?
&
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Polish Airports vol.2 X
Świetna wiadomość, dziękuję.
W takim razie muszę zagaić w innym wątku, bo akurat PA vol. 1 w wersji 4.6 nie ma u mnie radio buttona dla P3D V%.
&
W takim razie muszę zagaić w innym wątku, bo akurat PA vol. 1 w wersji 4.6 nie ma u mnie radio buttona dla P3D V%.
&