KDCA Washington National MSFS
Latest version: v1.4 (2023)
Re: KDCA Washington National MSFS
Hi,
Minor item that I noticed while taxiing on my last flight, there was a levitating ground worker (near gate 25/27 perhaps)? Also sorry it looks so washed out, must have caught the sun glare.
Bryan
Minor item that I noticed while taxiing on my last flight, there was a levitating ground worker (near gate 25/27 perhaps)? Also sorry it looks so washed out, must have caught the sun glare.
Bryan
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3422
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: KDCA Washington National MSFS
Hi Bryan, thanks for your report - we will note it and take a look into this before the next update.
- DD Stanislaw
- Administrator
- Posts: 6270
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: KDCA Washington National MSFS
Hi.
Levitating ground workers might be related to deactivated static aircraft. This is expected. If this is not the case, please let us know.
Levitating ground workers might be related to deactivated static aircraft. This is expected. If this is not the case, please let us know.
Re: KDCA Washington National MSFS
I checked and in the Orbx configuration the checkbox is checked for the "toggle to enable or disable static aircraft" item. When it is checked that is where the levitating worker is noticed. I do not see static aircraft regardless if this is checked or not. The next time I am in the sim, I will uncheck this option to see if it has any impact on the levitating person.DD Stanislaw wrote: ↑Thursday 01 Sep 2022, 13:53 Hi.
Levitating ground workers might be related to deactivated static aircraft. This is expected. If this is not the case, please let us know.
Thanks,
Bryan
- Martin_Starski
- 200+ posts
- Posts: 3422
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: KDCA Washington National MSFS
If you are not able to switch the statics on or off, I suggest asking about this feature on the ORBX forum first. This is because ORBX builds their own installers based on our source files and maybe something is wrong there. It would be great if you could ask them directly. If you don't get any help, I will support you then.
Re: KDCA Washington National MSFS
I noticed inoperable jetways around gates 40-50 as well. Not sure if this has been fixed yet just wanted to report it MSFS said that the jetway can't be found.
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3422
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: KDCA Washington National MSFS
What about 41 or 39? Are they inoperate either?
We also observed the issue with some jetways, but to be very honest we are not fully sure why there are two jetways, designed and configured completely in the same way, but one works and the other one doesn't. As soon as we figure it out, it will be solved.
We also observed the issue with some jetways, but to be very honest we are not fully sure why there are two jetways, designed and configured completely in the same way, but one works and the other one doesn't. As soon as we figure it out, it will be solved.
Re: KDCA Washington National MSFS
Any word on this?Awemeter wrote: ↑Monday 22 Aug 2022, 22:56 The sounds seem a bit bugged with the Fenix a320. When I go outside the Fenix flight deck I can barely hear the fans from the jetway but when I go back inside the flight deck the sound is very loud even with all my doors closed. Is it also possible to remove some of the static ground vehicles like the pushback truck or the GPU carts? These vehicles interfere with MSFS/GSX ground services and cause the vehicles to collide with each other.
- Martin_Starski
- 200+ posts
- Posts: 3422
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: KDCA Washington National MSFS
Hi, I'm afraid we have no solution to the sound issue and it might be caused due to the limitations of the sim. Regarding removing the ground vehicles - I need to check if it's possible to deactivate a file placing such objects - from which store do you have this scenery?
Re: KDCA Washington National MSFS
Right now I can't easier find one jetway that operates correctlyMartin_Starski wrote: ↑Wednesday 14 Sep 2022, 17:55 What about 41 or 39? Are they inoperate either?
We also observed the issue with some jetways, but to be very honest we are not fully sure why there are two jetways, designed and configured completely in the same way, but one works and the other one doesn't. As soon as we figure it out, it will be solved.
Re: KDCA Washington National MSFS
I purchased this addon through MSFS store in the sim. I did not see any install options. It just installed.
How can I remove the static aircraft? Please tell me where the file(s) are located and I can remove them manually.
A smaller issue, however I also saw the same problem where some jetways are not working.
Thanks,
John.
How can I remove the static aircraft? Please tell me where the file(s) are located and I can remove them manually.
A smaller issue, however I also saw the same problem where some jetways are not working.
Thanks,
John.
- Martin_Starski
- 200+ posts
- Posts: 3422
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: KDCA Washington National MSFS
Unfortunately it's not possible to remove statics with the version bought from the MSFS store. The naming of files is completely different than in our installer, so we are not able to indicate the respective files.
Regarding jetways - we are not fully sure why there are two jetways, designed and configured completely in the same way, but one works and the other one doesn't. As soon as we have a solution, we will provide the update.
Regarding jetways - we are not fully sure why there are two jetways, designed and configured completely in the same way, but one works and the other one doesn't. As soon as we have a solution, we will provide the update.
Re: KDCA Washington National MSFS
So how then do we remove statics if we have the MSFS store version??
Re: KDCA Washington National MSFS
Hello, regarding the statics, can you provide the names of the files and the size in bytes please.
With that information it may be enough to find the files here. Even if they are named differently.
Thanks.
With that information it may be enough to find the files here. Even if they are named differently.
Thanks.
- Martin_Starski
- 200+ posts
- Posts: 3422
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: KDCA Washington National MSFS
It's not possible then - this installer is not done by us, so you need to raise this question to the MSFS store. The same with file naming - it's totally different than our files, so we are not able to indicate the respective ones.