EPWA Warsaw Chopin MSFS

[Markucha21]

Czy macie już dostęp do dev alpha msfs24? Cały czas martwię się o kompatybilność scenerii w nowym symulatorze. Nie chodzi nawet o to czy będą płatne aktualizacje czy nie ale o to że dostosowanie scenerii będzie skomplikowane i albo będziemy długo czekać na update albo w ogóle zaczną wychodzić wersje V2 bo będzie łatwiej i kolejne 4 lata czekania na Epwa :p.

[Martin_Starski]

To alpha więc może się jeszcze coś zmienić. Szału nie ma, ale tragedii również - poczekajmy co przyniosą kolejne testy.

[Markucha21]

Życzę powodzenia! No i prośba zacznijcie od EPWA dostosowanie

[helge]

Hello,
I enjoy the Warsaw scenery, but I've encountered an issue that others have reported as well. When at the gate and in the cockpit, there's an extremely loud ambient noise. It sounds similar to having an open window, despite all windows being closed. This noise is peculiarly only present in the cockpit view - when switching to external view, the sound disappears completely.
Is there an option to reduce the volume of environmental sounds while at the gate? The current volume level is uncomfortably loud and seems unrealistic.

[Martin_Starski]

Hi, if this sound is bothering you too much, I can suggest that you go to drzewieckidesign-epwa/SimObjects/Landmarks and remove the folder MN_sound_Terminal_Ambient_01

[Tarzan]

Hey guys,

I have this strange buildings on the airport.

Anyone got an idea hav I can remove those?

Regards Luca

[Martin_Starski]

Hi, it would be good to have some more information

Is it a PC or Xbox?
From which store do you have your version?
Do you have a default Bing map enabled?
Have you tried to do some basic steps, meaning:

-> Clear SceneryIndexes Cache - the simulator will rebuild the indexes automatically during the next start.
-> Set the scenery priority
-> Isolation of conflicting add-on

[Tarzan]

Hi, it would be good to have some more information

Is it a PC or Xbox?
From which store do you have your version?
Do you have a default Bing map enabled?
Have you tried to do some basic steps, meaning:

-> Clear SceneryIndexes Cache - the simulator will rebuild the indexes automatically during the next start.
-> Set the scenery priority
-> Isolation of conflicting add-on

Hey, I'm on PC.
- Bought via Contrail
- Yes Bing is enabled
- Your mentioned steps where already done

[Martin_Starski]

Hi, I understand that after all these steps there is no change, right?

Have you tried to isolate this scenery to see if there is no conflicting addon? There is "exclude" to the whole terrain, so there shouldn't be any third-party buildings. We are also not able to replicate your issue.

Can you share the screenshot from a much longer distance to see it better in a bigger area? Maybe we can see something more distinctive.

[Cegla]

Ze swojej strony tylko chciałem potwierdzić rwanie i spadek fps po zainstalowaniu Landmarks. W momencie odinstalowania wszystko wraca do normy.

[Martin_Starski]

Nie znając ustawień grafiki i danych sprzętu, trudno jest się odnieść. Być może Landmarki mogą być jeszcze nieco lepiej zoptymalizowane, ale pojawiały się też opinie i sugestie jak niżej.

Epwa używam z waszą warszawa oczywiście. Do tego mogę poradzić że trzeba uważać na zużycie VRAMu jak jest bliskie maksymalnej to najlepiej zjechać jakość tekstur bo będą przycinki. Między ultra i high ja gołym okiem nie jestem w stanie znaleść różnicy a oszczędność vramu i płynność jest o wiele większa.

[tommydude2002]

Can you somehow show us via screenshot or video what's the issue? Do you mean that when you are on ILS and following the glideslope, you are too high after the pre-threshold area? Do you have the same issue with the other planes?

https://youtu.be/uOmWFUDQNL8 I uploaded a video. You can see theres quite a bit of an elevation difference between navigraph data and the actual runway. Around about 60-70ft

[Martin_Starski]

https://youtu.be/uOmWFUDQNL8 I uploaded a video. You can see theres quite a bit of an elevation difference between navigraph data and the actual runway. Around about 60-70ft

The point is that you are the only one reporting this issue. I also checked videos of some other users and they have no such elevation issue.



Can you confirm that you tried to isolate our scenery to find the conflicting add-on? I mean going to the 'Community' folder and moving all add-ons except the one suspected conflicting one to a temporary folder. You can de-activate individual add-ons or groups of add-ons and then figure out whether the conflict is solved or not. This solution can help to determine whether the issue is with the specific add-on or a combination of a few add-ons.

I assume that such standard steps like rebuilding the sceneryindexes and setting scenery priority have been done.

[tommydude2002]

https://youtu.be/uOmWFUDQNL8 I uploaded a video. You can see theres quite a bit of an elevation difference between navigraph data and the actual runway. Around about 60-70ft

The point is that you are the only one reporting this issue. I also checked videos of some other users and they have no such elevation issue.



Can you confirm that you tried to isolate our scenery to find the conflicting add-on? I mean going to the 'Community' folder and moving all add-ons except the one suspected conflicting one to a temporary folder. You can de-activate individual add-ons or groups of add-ons and then figure out whether the conflict is solved or not. This solution can help to determine whether the issue is with the specific add-on or a combination of a few add-ons.

I assume that such standard steps like rebuilding the sceneryindexes and setting scenery priority have been done.

But you can see on your screenshot that you are below the glideslope and still having 3 white on PAPI. That's exactly the problem I'm referring to here. There's no terrain glitches at the airport or other bumpy runway/taxiway issues. What I meant by elevation issue is that navigraph's ILS data doesn't really seem to match the threshold height of your physical runways. The airport and runways in general might've been 50ft too low compared to published charts.

[tommydude2002]

I'll try to spawn at the runway threshold and use the MSFS HUD to see the actual elevation there later today. I can check those numbers against Navigraph charts. Right now RWY33 is listed at 355ft and RWY11 at 362ft