KMDW Chicago Midway MSFS

[swaluver88]

There is no simple afcad in MSFS. We need to take a look but it sounds weird. Have you tried some basic steps like rebuild sceneryindexes, set priority and/or eliminate potentially conflicting addons?

i have, just seems like its using old taxiway data than what its currently displaying on the sceneries. i can try a few other things when i get home from work.

[Martin_Starski]

I'm afraid it's not possible that twy is going through the grass. It might be caused by a default files.

Can you elaborate and show us clearly what is wrong in our scenery and not follow the Jeppesen charts?

[swaluver88]

okay so here is what the current chart looks like now

mdw.png

but this is how it was, E1 actually connected through to 31R(31C), now it doesnt
here is the old chart

mdw 2.png

if you look at the traffic (which i will double verify as i dont have any other chicago scenery other than v1.2 of MDW from you guys) it seems like its takes that the old E1 which goes all the way through to 31R(31C).

Microsoft Flight Simulator Screenshot 2025.10.07 - 14.20.29.24.png

after i get off of work. ill do a full uninstall and reinstall of MDW v1.2 and see if it happens again for damage control

[alexohenry]

Hi, I just bought this airport and was impressed with the quality. Something that bothers me is the number of static aircraft and disabled gates. I know that I can disable the static aircraft, but it leaves empty and unusable gates. As far as I know you guys did provide a .BGL file for some other airports like KEWR to enable the previously disabled gates. Can you please do the same for this airport and hopefully all other airports because it is annoying to not be able to use the gates especially for airports in Europe where the gates are often assigned by the controller upon arrival but somehow that gate is disabled and unusable in your scenery.

And also can you please update so that RW 31C/13C will now be labeled as 31R/13L. I know these changes are made very recently but would really appreciate the update. Thank you!

[Martin_Starski]

please update so that RW 31C/13C will now be labeled as 31R/13L.

This change was implemented in the last scenery version.



What version do you have and from which store?

but this is how it was, E1 actually connected through to 31R(31C), now it doesnt

You are right but KMDW is still undergoing a very large reconstruction. We did the main corrections but all changes will be made as soon as the reconstruction is completed.

[alexohenry]

please update so that RW 31C/13C will now be labeled as 31R/13L.

This change was implemented in the last scenery version.



What version do you have and from which store?

no it was not and your picture is not even Drzewiwiecki Design's KMDW. Here is mine, purchased on iniManager, version 1.2.0:

[Martin_Starski]

I'm truly sorry - you are right, I shared the wrong file.

Here you go:

[alexohenry]

I'm truly sorry - you are right, I shared the wrong file.

Here you go:

I don't know how you have the runway labeled correctly but I just reinstalled the scenery and deleted the scenery index but it is still 31C-13C.