EPBY Bydgoszcz MSFS

[pawelusix]

Witam, dołączę się do dyskusji na temat niedziałającego ILS w EPBY, gdyż mam ten sam problem. Na początek zaznaczę, że używam MSFS 2024 i AIRAC z Navigraph.
Przeprowadziłem kilka testów i u mnie wygląda to tak:
brak zainstalowanej scenerii - ILS działa
sceneria z Marketplace (nieważne czy streaming czy zainstalowana) - ILS działa
sceneria z Simmarket (instalator v.1.1) - ILS nie działa, na podglądzie mapy po włączeniu NAVAIDS nie widać nadajnika.
Identyczna sytuacja występuje w EPZG.

[Martin_Starski]

Prosba o podmienienie zalaczonych plikow i sprawdzenie czy cokolwiek sie zmienilo.

[pawelusix]

Po podmianie plików ILS działa jak należy. Proszę o podobną łatkę dla EPZG

[tadeon]

Tak na marginesie dodam dla porządku, że u mnie też już działa. Dziękuję wszystkim za rady i wsparcie.

[DD Stanislaw]

Update published

Version: 1.2

Status: submitted to the stores (availability depends on store review / propagation)

Changes:
- Implemented ILS
- Removed duplicate chimney structures
- Removed default parking-area vehicles
- Added a no-static option with all parking stands active
- Adjusted ground markings: reduced brightness and saturation for improved realism

Notes:
- Updates are distributed as full installers only.
- To update, please log in to your account in the respective store and download the latest installer.
- Most stores notify customers automatically when a new version becomes available.
- If the update is not visible yet, please allow some time for the store to refresh.

[Giancarlo]

Hello, I've just bought EPBY x MSFS 2020/24 from Simmarket , but the installer doesn't find the MSFS 2020 that is normally installed in the default folder of my PC, some helps ?
thanks , Giancarlo

[Martin_Starski]

Hi, do you get any error message?

All our installers work the same - they are looking for the file UserCfg.opt in LocalCache:

MS Store:
%localappdata%Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\UserCfg.opt
Steam:
%appdata%\Microsoft Flight Simulator 2024\UserCfg.opt

And if it's not found, they ask for a manual selection of the correct folder and save that info into the registry. There should be no problems unless something is non-standard in your setup/configuration. Please try to temporarily delete the entire UserCfg.opt file (make a backup) and then ran the installer again. The installer will not be able to recognize it and allowe you to manually select the location of the MSFS installation folder. Then the entire installation process can be finalized.

[Giancarlo]

I delete UserCfg.opt file and then ran the installer again, i chose the correct folder for MSFS 2020, but again it says that the path of the simulator folder is unknown and the cycle goes on repeating always the same:

error.jpg

I don't know how solve this problem, since for me the scenery is impossible to install,
some other suggestion?
Thanks
Giancarlo

[Giancarlo]

Finally choosing "C:\Users\g....\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages" as main folder msfs2020 the installer completed the course
But the installer doesn't work correctly, an upgrade is necessary
Thanks anyway
Gioancarlo

[Martin_Starski]

Thanks. Do you have a standard setup/default directories? Can your share your usercfg.opt?

[Giancarlo]

I have a standard default installation, nothing changed, this is the content of the file opt:

Code: Select all

Version 66
{Video
	Adapter "NVIDIA GeForce GTX 1060 6GB"
	Monitor 0
	Windowed 1
	FullscreenBorderless 1
	WindowActive 0
	Resolution 1920 1080
	FullScreenResolution 1920 1080
	PosX 0
	PosY 29
	AntiAliasing TAA
	DLSSMode AUTO
	DLSSG 0
	Reflex OFF
	FSRMode BALANCED
	PrimaryScaling 1.000000
	SecondaryScaling 1.000000
	SharpenAmount 1.000000
	ReprojectionMode 0
	WorldScalePercentVR 100
	AntiAliasingVR TAA
	DLSSModeVR AUTO
	DLSSGVR 0
	ReflexVR OFF
	FSRModeVR PERFORMANCE
	PrimaryScalingVR 0.800000
	SecondaryScalingVR 1.000000
	SharpenAmountVR 1.000000
	VSync 0
	HDR10 0
	Raytracing 0
	PreferD3D12 0
	IntelMessageBoxDisplayed 0
	CurrentGPUDriverVersion 560.94.0
	DoNotShowGpuDriverRequirementPopup 1
}
{Graphics
	Version 1.1.0
	Preset Custom
	{Texture
		MaxAnisotropy 8
		Quality 1
	}
	{SuperSampling
		SuperSampling 2
	}
	{Terrain
		LoDFactor 1.000000
	}
	{OffscreenTerrainPreCaching
		Enabled 1
		Quality 2
	}
	{ObjectsLoD
		LoDFactor 1.000000
	}
	{Shadows
		MaxSliceCount 4
		Size 1536
		DLightContributionCullingThresholdS0 0.100000
		DLightContributionCullingThresholdS1 0.100000
		DLightContributionCullingThresholdS2 0.100000
		DLightContributionCullingThresholdS3 0.100000
		OmniContributionCullingThreshold 0.020000
	}
	{HeightFieldShadows
		Enabled 1
		Size 512
	}
	{SSRaytracedShadows
		Enabled 1
		Quality 2
	}
	{Water
		FFTSize 512
	}
	{VolumetricClouds
		Enabled 1
		Quality 2
	}
	{VolumetricLights
		Enabled 1
		Quality 2
	}
	{ReflectionProbe
		Size 192
	}
	{SSR
		Enabled 1
		HalfRes 0
		Quality 2
	}
	{WindShield
		Quality 2
	}
	{SSAO
		Enabled 1
		Quality 2
	}
	{Bloom
		Enabled 0
	}
	{DOF
		Enabled 1
		Quality 2
	}
	{MotionBlur
		Enabled 0
		Quality 0
	}
	{Buildings
		Enabled 1
		Quality 2
	}
	{VegetationLarge
		Enabled 1
		Quality 2
	}
	{VegetationSmall
		Enabled 1
		Quality 2
	}
	{TextureSynthesis
		Quality 2
	}
	{PostProcess
		Enabled 1
		EyeAdaptation 1
		ColorGrading 1
		Sharpen 1
		Fringe 1
		LensDistortion 0
		Dirt 1
		LensFlare 0
		FilmGrain 1
		Vignette 1
		LensBlurMultiplier 1.000000
		FringeMultiplier 1.000000
	}
	{VectorDataTessellation
		Enabled 1
		Quality 2
	}
}
{GraphicsVR
	Version 1.1.0
	Preset VRDefault
	{Texture
		MaxAnisotropy 4
		Quality 1
	}
	{SuperSampling
		SuperSampling 0
	}
	{Terrain
		LoDFactor 1.000000
	}
	{OffscreenTerrainPreCaching
		Enabled 1
		Quality 0
	}
	{ObjectsLoD
		LoDFactor 1.000000
	}
	{Shadows
		MaxSliceCount 4
		Size 768
		DLightContributionCullingThresholdS0 0.100000
		DLightContributionCullingThresholdS1 0.100000
		DLightContributionCullingThresholdS2 0.100000
		DLightContributionCullingThresholdS3 0.100000
		OmniContributionCullingThreshold 0.050000
	}
	{HeightFieldShadows
		Enabled 1
		Size 256
	}
	{SSRaytracedShadows
		Enabled 0
		Quality 0
	}
	{Water
		FFTSize 128
	}
	{VolumetricClouds
		Enabled 1
		Quality 1
	}
	{VolumetricLights
		Enabled 1
		Quality 1
	}
	{ReflectionProbe
		Size 128
	}
	{SSR
		Enabled 0
		HalfRes 0
		Quality 0
	}
	{WindShield
		Quality 1
	}
	{SSAO
		Enabled 0
		Quality 0
	}
	{Bloom
		Enabled 1
	}
	{DOF
		Enabled 0
		Quality 0
	}
	{MotionBlur
		Enabled 0
		Quality 0
	}
	{Buildings
		Enabled 1
		Quality 1
	}
	{VegetationLarge
		Enabled 1
		Quality 1
	}
	{VegetationSmall
		Enabled 0
		Quality 0
	}
	{TextureSynthesis
		Quality 0
	}
	{PostProcess
		Enabled 1
		EyeAdaptation 1
		ColorGrading 1
		Sharpen 1
		Fringe 0
		LensDistortion 0
		Dirt 0
		LensFlare 0
		FilmGrain 0
		Vignette 0
		LensBlurMultiplier 1.000000
		FringeMultiplier 1.000000
	}
	{VectorDataTessellation
		Enabled 1
		Quality 1
	}
}
InstalledPackagesPath "C:\Users\gianc\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages"
[\code]

[DD Stanislaw]

Hi Giancarlo,

Thank you for the detailed explanation and for posting your UserCfg.opt content — that helps.

First of all, nothing is wrong with your simulator installation and there is no installer update required.

What happened in your case is the following:

• The installer could not automatically detect the MSFS installation path.
• This can occasionally happen depending on how Windows registry entries are stored or updated.
• The installer then correctly switched to manual folder selection mode.

This is expected behavior and is part of the installer’s fallback mechanism.

When you manually selected:

C:\Users\gianc\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages

that was the correct folder, as confirmed by your InstalledPackagesPath entry in UserCfg.opt.

Once selected:

• The installer stores this path in an additional registry key.
• Future installers will read from that key.
• You should not need to manually select the folder again.

So the cycle you experienced was simply the installer asking for confirmation of the correct Packages folder. After that one-time selection, everything works as designed.

There is nothing to update or fix in the installer — it behaved correctly.

If you encounter any further issues with the scenery itself, please let us know.

[Przemek]

Witam.

Chciałem dopytać o jedną rzecz, ponieważ nigdzie jej nie znalazłem, a po testach scenerii w MSFS 2024 zauważyłem, że linie aiming point na pasie są lekko przesunięte w prawo. Sceneria i symulator posiadają aktualne wersje. Czy powodem może być domyślna sceneria? Teoretycznie nie powinna się "nakładać" z Waszą, ale wolę się upewnić gdzie może leżeć problem. Dziękuję.

[DD Stanislaw]

Witam.

Linie nie powinny być przesunięte; w ocenie sytuacji bardzo pomógłby screenshot z widocznym problemem.

[Przemek]

Proszę, wrzucam zdjęcie.