Polish Airports vol.1 X
Latest version: v5.1 (2020)
.DD Stanislaw wrote:Hi Carlos.
I have no idea. It seems like there is mesh problem but I have never seen something like this in this scenery.
Hi Stanislaw,
After my previous communication and your reply, I reinstalled the scenery and I went back to do some tests and came to the following conclusions:
1. When I launch FS starting from EPLB, I have no problem.
2. When I launch FS starting from any other Polish airport flying to EPLB, then I find the problems that have been reported.
3. I also checked that EPLB is not listed in the defaults FSX sceneries.
I appreciate that you try to reproduce the same situation flying from a Polish airport (eg EPRZ) to EPLB. I can not imagine that you do not find this problem because I have nothing wrong with all the other Polish sceneries (Vol.1 & Vol.3) except with this EPLB. In my opinion the problem must be with this EPLB. Please check and found a solution.
Regards,
Carlos
Carlos Pimentel
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Yes, thank you for this report. This will definitely be tested.
It should be there under EPLB. Please try to remove the AFX_EPSW.bgl from FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery , as a temporary solution (might not work). We will investigate both issues asap.cpimentel wrote:I also checked that EPLB is not listed in the defaults FSX sceneries.
Hi Stanislaw,DD Stanislaw wrote:Yes, thank you for this report. This will definitely be tested.It should be there under EPLB. Please try to remove the AFX_EPSW.bgl from FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery , as a temporary solution (might not work). We will investigate both issues asap.cpimentel wrote:I also checked that EPLB is not listed in the defaults FSX sceneries.
Unfortunately your tip didn't work
Regards,
Carlos
Carlos Pimentel
Mam ten sam problem i również zainstalowany Ultimate Terrain X.cpimentel wrote: After my previous communication and your reply, I reinstalled the scenery and I went back to do some tests and came to the following conclusions:
1. When I launch FS starting from EPLB, I have no problem.
2. When I launch FS starting from any other Polish airport flying to EPLB, then I find the problems that have been reported.
3. I also checked that EPLB is not listed in the defaults FSX sceneries.
More printscreens
http://i796.photobucket.com/albums/yy24 ... 5fcaa2.png
http://i796.photobucket.com/albums/yy24 ... addfe7.png
http://i796.photobucket.com/albums/yy24 ... 5fcaa2.png
http://i796.photobucket.com/albums/yy24 ... addfe7.png
Carlos Pimentel
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Mój pierwszy post na forum
Na lotnisku EPKT oświetlenie pasa, dróg kołowania i budynków lotniska włącza się dopiero po dotknięciu kołami pasa. Jedyne ciągle działające oświetlanie to żółto-czerwony pasek położony na trawie, pomiędzy pasem, a płytą lotniska (przepraszam za brak fachowej nazwy). Proszę o pomoc!
Polish Airports vol.1 X 3.2 (ustawiona na najwyższy priorytet)
FSX SP2
DX10 on
Windows 8.1 64bit
4gb ram
Nvidia 8800gt
Amd Athlon x2 5000+ 2.6 (OC to 3.0)
Msi K9n Ultra
Polish Airports vol.1 X 3.2 (ustawiona na najwyższy priorytet)
FSX SP2
DX10 on
Windows 8.1 64bit
4gb ram
Nvidia 8800gt
Amd Athlon x2 5000+ 2.6 (OC to 3.0)
Msi K9n Ultra
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Still working on EPLB mesh issue. It seems that we have found the solution and I would appreciate if you could test the file below:
http://rapidshare.com/share/5A0D66CBC25 ... CADDE59A53
Simply put the BGL file into: FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery folder and try to fly to EPLB from another airport. It should work fine now.
http://rapidshare.com/share/5A0D66CBC25 ... CADDE59A53
Simply put the BGL file into: FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery folder and try to fly to EPLB from another airport. It should work fine now.
Niestety śniegu przybywa
http://imageshack.com/a/img202/6103/mqtv.jpg
Po zalogowaniu się w Lublinie pas jest czysty, po przylocie z Rzeszowa taki jak widać na powyższym zdjęciu - klęska żywiołowa...
http://imageshack.com/a/img202/6103/mqtv.jpg
Po zalogowaniu się w Lublinie pas jest czysty, po przylocie z Rzeszowa taki jak widać na powyższym zdjęciu - klęska żywiołowa...
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Ok, dzięki za info. Jeszcze jedna próba i również byłbym wdzięczny za raport:
http://rapidshare.com/share/7DFB12BF8F4 ... DD4263F5E5
http://rapidshare.com/share/7DFB12BF8F4 ... DD4263F5E5