Polish Airports vol.3 X
Latest version: v4.1 (2020)
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Polish Airports vol.3 X
Polish Airports vol.3 X by Drzewiecki Design
More info at/Więcej na: http://www.drzewiecki-design.net/prodPAv3_X.htm
English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
More info at/Więcej na: http://www.drzewiecki-design.net/prodPAv3_X.htm
English and Polish discussion and support in this topic / Dyskusja po polsku i po angielsku w tym temacie.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Bought, downloaded and instaled. Now I'm starting to fly over EPBY. Magnificient, whole city full of buildings and trees, and I don't see any bad influence on FPS. I have both settings "scenery complexity" and "autogen complexity" set as extremely dense. Around EPBY airport and city of Bydgoszcz I have photoscenery (VFRPoland) without autogen and when I approach and fly over PAv3 EPBY scenery area I don't see any FPS slow down, still 35 FPS locked at NVI - that is great.
(platform: i5 2500@4.1 GHz, GTS450 1GB, 8GB ram, Win7/64)
(platform: i5 2500@4.1 GHz, GTS450 1GB, 8GB ram, Win7/64)
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Some Problems with EPWR
Hello,
first off all thanks a lot for another great scenery bundle! Great Stuff!
Unfortunately I have some trouble during the approach into EPWR. First thing I only get a visual approach from FSX ATC. In the default GPS there is one ILS selectable but without any runway designator. Second thing is that after Warsaw Center you get the handover to an unknown approach with frequency 127.22. FSX is unable to get in contact with this approach and there are no possibilities to get in contact again with FSX ATC
Maybe you could have a look on this two isssus
Thx a lot!
Cheers,
Mark
first off all thanks a lot for another great scenery bundle! Great Stuff!
Unfortunately I have some trouble during the approach into EPWR. First thing I only get a visual approach from FSX ATC. In the default GPS there is one ILS selectable but without any runway designator. Second thing is that after Warsaw Center you get the handover to an unknown approach with frequency 127.22. FSX is unable to get in contact with this approach and there are no possibilities to get in contact again with FSX ATC
Maybe you could have a look on this two isssus
Thx a lot!
Cheers,
Mark
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hello Mark.
I have rechecked the approach and in case of my files (should be exactly the same as yours) the ATC give the ILS approach (the same with other airports). Anyway, the ILS frequency is 110.300 MHz so you should be able to use all available navigation aids at the airport. You can also try to contact approach at 127.250 MHz.
I have rechecked the approach and in case of my files (should be exactly the same as yours) the ATC give the ILS approach (the same with other airports). Anyway, the ILS frequency is 110.300 MHz so you should be able to use all available navigation aids at the airport. You can also try to contact approach at 127.250 MHz.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Update from version 1.0 to version 1.2 (FSX/P3D full version only) - 2MB
This file updates our product from version 1.0 to version 1.2. It corrects all known issues with our Polish Airpots vol.3 X product. Works only with the full version.
To get the updated demo, please simply dowload it again and install. Old files will be overwritten.
This file updates our product from version 1.0 to version 1.2. It corrects all known issues with our Polish Airpots vol.3 X product. Works only with the full version.
To get the updated demo, please simply dowload it again and install. Old files will be overwritten.