UUEE Moscow Sheremetyevo X V2
Latest version: v2.3 (2020)
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
For those who use our free DEMO instead of The Pirate Bay : the new v1.1 DEMO is now available. It fixes ground shadows in P3D, apron lights in P3D and taxiway names in all sims.
PS: Installing the DEMO while having the full scenery already installed will result in both being displayed (not very good option) however installing the full version AFTER installing the DEMO will simply disable the DEMO.
PS: Installing the DEMO while having the full scenery already installed will result in both being displayed (not very good option) however installing the full version AFTER installing the DEMO will simply disable the DEMO.
There is not a problem with SODE starting. It starts each time. But it stops when P3D finishes loading. And even on one occassion, Stan, it even worked! I cannot recreate this success however. I did post the appcrash details, by the way, but really that was not specific enough to really help me localize the problem.
Instead I will remove SODE and try the demo version, using the buildings, as you say.
Instead I will remove SODE and try the demo version, using the buildings, as you say.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Now P3D will not load the terrain at all.... gets stuck at 6%, while loading terrain data, after launching the flight.
[ Added: Sun Sep 14, 2014 06:23 ]
Stan, I resolved my unrelated issues with P3D not loading and installed version 1.1 of UUEE -- I have SODE disabled (does not work anyway for me) and I now have static gates at Sheremetievo. Not sure why it worked, but it did.
So, perfect now. Thank you for the update.
[ Added: Sun Sep 14, 2014 06:23 ]
Stan, I resolved my unrelated issues with P3D not loading and installed version 1.1 of UUEE -- I have SODE disabled (does not work anyway for me) and I now have static gates at Sheremetievo. Not sure why it worked, but it did.
So, perfect now. Thank you for the update.
-
- 5-12 posts
- Posts: 9
- Joined: Friday 21 Sep 2012, 19:28
- Location: Eisenstadt
still no jetways in version 1.1
dear stanislaw!
after having completely uninstalled moscow sheremetyevo x version 1.0 and having installed version 1.1 from scratch i still don't have any jetways. "shift+d" obviously does not work either. your advice is greatly appreciated.
best regards
michael
after having completely uninstalled moscow sheremetyevo x version 1.0 and having installed version 1.1 from scratch i still don't have any jetways. "shift+d" obviously does not work either. your advice is greatly appreciated.
best regards
michael
-
- 2-4 posts
- Posts: 3
- Joined: Thursday 16 Jan 2014, 21:31
- Location: Texas
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Which sim do you use? Does the Shift+D window open at all? Are you sure you haven't enabled the AES compatibility option?Michael_LOWW wrote:still don't have any jetways
Which sim do you use? Have you tried both install options with the extra mesh and without it? BTW even GSX installs AFCAD files as far as I know.MacAviator wrote:I have default textures showing through this scenery.
Jet bridge position
Dzien dobry, pan Stanislaw
First of all I want to thank you for the perfect scene.
I have one request for you. I have Majestic Dash 8 Q400, and in UUEE/EETN scenes both not one jet bridge is not docked properly, I mean exactly on first exit door in accordance with the door dimensions. All other scenes with animated jet bridges (in default airports and in payware scenes) have no such problem. I think it's because in another scenes exits dimensions in aircraft.cfg are taken into account. For example part of my dash 8 aircraft.cfg:
[exits]
number_of_exits = 4
exit.0=0.2,-16.50, -5.0, 0.0, 0 //main door
. . .
Parameters explanation is here http://msdn.microsoft.com/en-us/library ... ocId310622
I would be very grateful to you for jetway animation adaptation in accordance with the real exit-door location.
Pozdraviam,
Valery
First of all I want to thank you for the perfect scene.
I have one request for you. I have Majestic Dash 8 Q400, and in UUEE/EETN scenes both not one jet bridge is not docked properly, I mean exactly on first exit door in accordance with the door dimensions. All other scenes with animated jet bridges (in default airports and in payware scenes) have no such problem. I think it's because in another scenes exits dimensions in aircraft.cfg are taken into account. For example part of my dash 8 aircraft.cfg:
[exits]
number_of_exits = 4
exit.0=0.2,-16.50, -5.0, 0.0, 0 //main door
. . .
Parameters explanation is here http://msdn.microsoft.com/en-us/library ... ocId310622
I would be very grateful to you for jetway animation adaptation in accordance with the real exit-door location.
Pozdraviam,
Valery
FlightSim Commander and UUEE ILS
Hi,
Just wondering why I can't see UUEE ILS within FSC 9.5. It seems that ILS in the AFCAD file are from Fsx stock. Is it the reason they disepear when running FSDBmanager? No link between stock ils and runways?
The following ILS'es could not be assigned:
UUEE_AD.bgl - IBW - ILS 25L - 55.96586 - 37.37764
UUEE_AD.bgl - IMR - ILS 07L - 55.97943 - 37.45108
UUEE_AD.bgl - IAD - CAT II ILS - 55.96773 - 37.37283
UUEE_AD.bgl - INL - CAT III IL - 55.97713 - 37.45328
Regards,
Skip.
PS: FSC support on hollydays
Just wondering why I can't see UUEE ILS within FSC 9.5. It seems that ILS in the AFCAD file are from Fsx stock. Is it the reason they disepear when running FSDBmanager? No link between stock ils and runways?
The following ILS'es could not be assigned:
UUEE_AD.bgl - IBW - ILS 25L - 55.96586 - 37.37764
UUEE_AD.bgl - IMR - ILS 07L - 55.97943 - 37.45108
UUEE_AD.bgl - IAD - CAT II ILS - 55.96773 - 37.37283
UUEE_AD.bgl - INL - CAT III IL - 55.97713 - 37.45328
Regards,
Skip.
PS: FSC support on hollydays
-
- 5-12 posts
- Posts: 9
- Joined: Friday 21 Sep 2012, 19:28
- Location: Eisenstadt
uuee x still no jetways
hey stanislaw!
i use fsx. the "shift+d" window does not open. i am sure that the aes compatibility option is not enabled.
thank you for your kind advice.
best regards,
michael
i use fsx. the "shift+d" window does not open. i am sure that the aes compatibility option is not enabled.
thank you for your kind advice.
best regards,
michael
-
- 2-4 posts
- Posts: 3
- Joined: Thursday 16 Jan 2014, 21:31
- Location: Texas
I was able to fix the texture problem with a reinstall. I would like to point something out that I think is disappointing, and correct me if I'm wrong, and add a photo to show me why, because it could very well be my settings. I find that some of your sceneries are inconsistent with runway textures, especially runway markings.
Quite a few of the smaller airports look as if the the runway markings are actually painted on the runway. Larger airports, like Moscow, and New York look as if you've overlaid default markings giving them a very bright white that looks unnatural. The entire Moscow airport looks great, but on short final those runway markings not having any texturing, lacking the look as if they are painted there is disappointing. Please tell me that Warsaw will have beautiful runway textures.
Quite a few of the smaller airports look as if the the runway markings are actually painted on the runway. Larger airports, like Moscow, and New York look as if you've overlaid default markings giving them a very bright white that looks unnatural. The entire Moscow airport looks great, but on short final those runway markings not having any texturing, lacking the look as if they are painted there is disappointing. Please tell me that Warsaw will have beautiful runway textures.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Jet bridge position
Hello. There are no data taken into account at all - jetways move to a predefined position. Please read the manual.Valery wrote:another scenes exits dimensions in aircraft.cfg are taken into account
I would rather contact FSC support. We can edit some files if it is required by FSC.skipy wrote:I can't see UUEE ILS within FSC 9.5
This is a rare issue but it happened a few times We are investigating it with another customer. In case you wish to help, please do the following:Michael_LOWW wrote:the "shift+d" window does not open
Please check if the <Path></Path> parameter of <Name>SODE</Name> is correct. To do it you need to open the exe.xml file located in C:\Users\...\AppData\Roaming\Microsoft\FSX . If the path is correct, please check if SODE is in the [Trusted] section in your FSX.cfg (the entry will look similar to D:\FSX\SODE\SimObjectDisplayEngine.exe.unukuirluqzlrnroooozwcizzwlqweztknkwewna=1 ). If there is nothing like this, please add the line above and test it.
Please try putting THIS TEXTURE into FSX\Addon Scenery\UUEE Moscow Sheremetyevo X\Texture .MacAviator wrote:runway markings (...) bright white that looks unnatural
-
- 5-12 posts
- Posts: 9
- Joined: Friday 21 Sep 2012, 19:28
- Location: Eisenstadt
Re: Jet bridge position
dear stanislaw!
both entries in the exe.xml and the fsx.cfg are correct. would you have any other idea?
best regards,
michael
both entries in the exe.xml and the fsx.cfg are correct. would you have any other idea?
best regards,
michael