NY Airports v2 X
Latest version: v2.6 (2020)
Re: NY Airports v2 X
Martin
Do you have a mesh I use fs global 2020 and 2m mesh p3d setting. I fall through in a PMDG plane in the bridge on the taxiways each time
Do you have a mesh I use fs global 2020 and 2m mesh p3d setting. I fall through in a PMDG plane in the bridge on the taxiways each time
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Bridges are very sensitive to the mesh setting and thus it can be the case. Have you tried to check if there is no issue with inactive FS global? Have you tried max mesh setting?
Re: NY Airports v2 X
Unable 1m mesh causing holes in scenery and spikes in FSDreamteam. I can deactivate the Mesh and try, in P3D v4 I did have problems in the Chicago bridge taxiways over the road but not at JFK. IN P3D v5 I have issues in JFK I have not flown in Chicago yet. I read FlyTampa forums about the new Amsterdam and there are similar scenery terrain mesh issues some people but not all are having.
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
That's the key - something has to make a difference. It would be nice if you could deactive fsglobal / mesh addon and check.
But just for testing purposes - is it possible to check?
Re: NY Airports v2 X
Okay testing time is limited I hoped I could explain in some detail and get an answer. I will in a few days try different methods 1m mesh and no addon mesh and reply.
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Thanks in advance for your support!
Re: NY Airports v2 X
Hello,
After a night flight and landing at dusk, I noticed a HUGE performance hit when my aircraft was close to or under the terminal lights. What is causing this and how can I "turn down" the lights as to avoid such a HUGE performance hit? This is the only scenery that acts likes this...thank you.
Love the scenery otherwise! Own multiple!!
After a night flight and landing at dusk, I noticed a HUGE performance hit when my aircraft was close to or under the terminal lights. What is causing this and how can I "turn down" the lights as to avoid such a HUGE performance hit? This is the only scenery that acts likes this...thank you.
Love the scenery otherwise! Own multiple!!
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Which airport are you talking about?
Are you talking about P3D v4.5 or P3D v5.1?
What do you mean by the "HUGE performance hit"? What are your PC specs and sim settings? Do you mean dynamic lighting?
We need much more details, because otherwise it's hard to say something more - so far many users claim that our scenery is very fps-friendly and they love our night lighting (see customer reviews in Simmarket for instance).
Are you talking about P3D v4.5 or P3D v5.1?
What do you mean by the "HUGE performance hit"? What are your PC specs and sim settings? Do you mean dynamic lighting?
We need much more details, because otherwise it's hard to say something more - so far many users claim that our scenery is very fps-friendly and they love our night lighting (see customer reviews in Simmarket for instance).
Re: NY Airports v2 X
Sorry, should have included that info.
KEWR, P3Dv4.5, fps drop to low single digits. High-end PC with settings on high/ultra high. and I mean dynamic lighting.
KEWR, P3Dv4.5, fps drop to low single digits. High-end PC with settings on high/ultra high. and I mean dynamic lighting.
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
But drop is general to the whole KEWR airport or only in the specific locations? Have you tested it without DL - is there any difference for you? Any other addons in this area? Have you played with your sim settings - is there any difference?
It is still hard to say something "smart" without viewing the actual results (like screenshots or FPS graphs), without knowing your exact sim settings or PC specs. I'm not able to replicate it on my clean install with medium settings - I'm able to reach good FPS. Such significant drop can only be done by failures in the sim configuration or failed 3rd-party content configuration, which can interfere with our scenery.
It is still hard to say something "smart" without viewing the actual results (like screenshots or FPS graphs), without knowing your exact sim settings or PC specs. I'm not able to replicate it on my clean install with medium settings - I'm able to reach good FPS. Such significant drop can only be done by failures in the sim configuration or failed 3rd-party content configuration, which can interfere with our scenery.
-
- 0-1 posts
- Posts: 1
- Joined: Saturday 06 Feb 2021, 01:47
- Name: moneysniper02
Re: NY Airports v2 X
What should I do with this situation? Thanks!! I need help.
You do not have the required permissions to view the files attached to this post.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi. This is the folder our installer is trying to install files to. If the folder name is incorrect (seems like it), please check registry entries for your P3Dv4.
Prepar3Dv4:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lockheed Martin\Prepar3D v4 - key name is "SetupPath"
or
HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v4 - key name is "SetupPath"
or
HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4 - key name is "AppPath"
Prepar3Dv4:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lockheed Martin\Prepar3D v4 - key name is "SetupPath"
or
HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v4 - key name is "SetupPath"
or
HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4 - key name is "AppPath"
-
- 13-25 posts
- Posts: 16
- Joined: Monday 30 Sep 2019, 22:53
- Name: Jerry
- Location: Dallas, Texas
Re: NY Airports v2 X
I just purchased NY AIRPORTS v2 X: KJFK, KLGA, KTEB. I have Imaginesim KLGA but I had to re-install P3Dv4.5 and I couldn't get the Sode jetways to show and I really wanted a current version anyway. I'm having the same problem with DRZEWIECKI's airport. No jetways.
- DD Stanislaw
- Administrator
- Posts: 6271
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi. If there are no jetways it means that SODE is not working correctly. Please try reinstalling SODE.
https://www.dropbox.com/s/0u5jptygmoopv ... t.msi?dl=1
https://www.dropbox.com/s/0u5jptygmoopv ... t.msi?dl=1
- Martin_Starski
- 200+ posts
- Posts: 3423
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Please also check if SODE is registered and if there is a required simconnect - everything is described in the SODE user guide available here: https://sode.12bpilot.ch/?page_id=9