EPWA Warsaw Chopin Airport X
Latest version: v1.97 (2020)
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Yes, this is correct. This has multiple big advantages:
1. This looks more realistic in terms of light brightness viewed at angles - runway lights are the brightest when on approach, from the side you almost don't see them.
2. Increase of performance.
3. Can be manually switched on by selecting 112.00MHz on NAV2 at any time of the day and weather.
1. This looks more realistic in terms of light brightness viewed at angles - runway lights are the brightest when on approach, from the side you almost don't see them.
2. Increase of performance.
3. Can be manually switched on by selecting 112.00MHz on NAV2 at any time of the day and weather.
Runway lights
Thank you for this explanation. I really appreciate it. Have a nice landings on this scenery captains and I hope another project will come out soon.
Thank you very much
Thank you very much
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Słusznie, ale "kumaty" pilot zrozumie, co autor miał na myśli he he
Proszę, poprawione: https://www.dropbox.com/s/53ksqiz02zc11 ... S.pdf?dl=1
Proszę, poprawione: https://www.dropbox.com/s/53ksqiz02zc11 ... S.pdf?dl=1
Hi,
I have had Warsaw for a while now, and everything has been working great!
I recently was parked at a gate, and I went into GSX to customize my aircraft, when I was done, I opened the SODE menu again, and it said that there were no objects within a 6.5NM radius.
Now whenever I load up EPWA, SODE gives me the message that there is nothing in the area.
I have reinstalled SODE and EPWA, but just cant get it to work.
Not sure what could be causing and where to look...
Another thing I have noted, I cant tell if I am imagining it, but when you type EPWA on the airport ID within P3D, should the airport name be Warsaw Chopin? If it is, on mine, it comes up with the old name, Okecie.
I am running P3D V3.4 on Windows 10.
Thanks,
Kevin
[ Added: Sun Apr 09, 2017 16:45 ]
Okay, not sure what the issue was, but re-installed again and everything is working fine now again.
I have had Warsaw for a while now, and everything has been working great!
I recently was parked at a gate, and I went into GSX to customize my aircraft, when I was done, I opened the SODE menu again, and it said that there were no objects within a 6.5NM radius.
Now whenever I load up EPWA, SODE gives me the message that there is nothing in the area.
I have reinstalled SODE and EPWA, but just cant get it to work.
Not sure what could be causing and where to look...
Another thing I have noted, I cant tell if I am imagining it, but when you type EPWA on the airport ID within P3D, should the airport name be Warsaw Chopin? If it is, on mine, it comes up with the old name, Okecie.
I am running P3D V3.4 on Windows 10.
Thanks,
Kevin
[ Added: Sun Apr 09, 2017 16:45 ]
Okay, not sure what the issue was, but re-installed again and everything is working fine now again.
Problem z instalacj±
Witam,
Kilka dni temu postanowiłem kupić EPWA X od was. W związku z tym postanowiłem przeinstalować FSX na inny dysk twardy (wcześniej miałem wasze demo EPWA x) i od tego czasu gdy próbuję zainstalować którykolwiek z waszych produktów to próbuje mi się zainstalować w dawnej i nieistniejącej lokalizacji. Dodam, że gdy odinstalowywałem FSX to czyściłem co się dało: Appdata/local/Microsoft - i usuwałem FSX, Appdata/Roaming/Microsoft - i usuwałem FSX folder, ProgramData.... i tak dalej. Po całym procesie czyściłem rejestry w systemie. W dodaj usuń programy znalazłem SODĘ i odinstalowałem.
Mimo tych wszystkich kroków problem nadal występuję, nie jestem w stanie prawidłowo zainstalować waszego dodatku jako że nie ma możliwości zainstalowania go manualnie.
Używam "FSX SE"
Pozdrawiam,
Kilka dni temu postanowiłem kupić EPWA X od was. W związku z tym postanowiłem przeinstalować FSX na inny dysk twardy (wcześniej miałem wasze demo EPWA x) i od tego czasu gdy próbuję zainstalować którykolwiek z waszych produktów to próbuje mi się zainstalować w dawnej i nieistniejącej lokalizacji. Dodam, że gdy odinstalowywałem FSX to czyściłem co się dało: Appdata/local/Microsoft - i usuwałem FSX, Appdata/Roaming/Microsoft - i usuwałem FSX folder, ProgramData.... i tak dalej. Po całym procesie czyściłem rejestry w systemie. W dodaj usuń programy znalazłem SODĘ i odinstalowałem.
Mimo tych wszystkich kroków problem nadal występuję, nie jestem w stanie prawidłowo zainstalować waszego dodatku jako że nie ma możliwości zainstalowania go manualnie.
Używam "FSX SE"
Pozdrawiam,
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Witam.
http://drzewiecki-design.net/forum/viewtopic.php?t=293
Najlepszym rozwiązaniem będzie dodanie do rejestru ścieżki do aktualnej lokalizacji jako do FSX (zwykłego) i następnie instalowanie programów pod zwykły FSX (nie FSX:SE).
Pozdrawiam
http://drzewiecki-design.net/forum/viewtopic.php?t=293
Najlepszym rozwiązaniem będzie dodanie do rejestru ścieżki do aktualnej lokalizacji jako do FSX (zwykłego) i następnie instalowanie programów pod zwykły FSX (nie FSX:SE).
Pozdrawiam
DD Stanislaw wrote:Witam.
http://drzewiecki-design.net/forum/viewtopic.php?t=293
Najlepszym rozwiązaniem będzie dodanie do rejestru ścieżki do aktualnej lokalizacji jako do FSX (zwykłego) i następnie instalowanie programów pod zwykły FSX (nie FSX:SE).
Pozdrawiam
Dziękuję za informacje, właśnie zrobiłem jak było w poradniku i podziałało . Ale pojawił się inny problem który ktoś już tu wyżej wspomniał. Mianowicie gdy próbuję skorzystać z rękawa itp. na okienku wyświetla mi się informacja: "no objects within a 6.5NM radius".
Pozdrawiam.
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Witam,West wrote:[url=http://files.tinypic.pl/i/00907/mu9vu310fl8z_t.jpg]Image[/URL]
Właśnie zainstalowałem PA v2, EETN oraz EPWA. Wszystkie zaktualizowane pod P3D v4.
Niestety ale przy uruchamianiu otrzymuje za każdym razem taki komunikat.
Proszę o pomoc.
Mam ten sam problem po zainstalowaniu PA vol1_X.
Proszê o pomoc
- Martin_Starski
- 200+ posts
- Posts: 3418
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
DD is working on that -> http://drzewiecki-design.net/forum/view ... 0995#10995
Dziêkujê bardzo za odpowied¼.Martin_Starski wrote:DD is working on that -> http://drzewiecki-design.net/forum/view ... 0995#10995