UUEE Moscow Sheremetyevo 2015
Latest version: v1.8 (2016)
Good evening,
here are some screenshots:
At day
http://i92.photobucket.com/albums/l2/Ge ... 43fdc4.jpg
at night (FPS significantly higher)
http://i92.photobucket.com/albums/l2/Ge ... ee4a3b.jpg
these are the lines mentioned above - a minor problem IMHO
http://i92.photobucket.com/albums/l2/Ge ... 7fd8c2.jpg
Spotter's paradise
http://i92.photobucket.com/albums/l2/Ge ... 420ce3.jpg
Regards,
Harald
here are some screenshots:
At day
http://i92.photobucket.com/albums/l2/Ge ... 43fdc4.jpg
at night (FPS significantly higher)
http://i92.photobucket.com/albums/l2/Ge ... ee4a3b.jpg
these are the lines mentioned above - a minor problem IMHO
http://i92.photobucket.com/albums/l2/Ge ... 7fd8c2.jpg
Spotter's paradise
http://i92.photobucket.com/albums/l2/Ge ... 420ce3.jpg
Regards,
Harald
Hi Stanislaw!
My problem is that the new scenery after 5-7 minutes of the restart FS9 error message, and if I'm using an older UUEE it will run without problems in the FS.
The operating system is Win7, Nvidia GeForce GTX 465 typ. video card, Intel iCore i7-2600 3,4GHz, 12GM RAM, 1280x1014 / 60Hz.
Pls HELP me!
Of course, genuine full version.
THX, Istvan.
My problem is that the new scenery after 5-7 minutes of the restart FS9 error message, and if I'm using an older UUEE it will run without problems in the FS.
The operating system is Win7, Nvidia GeForce GTX 465 typ. video card, Intel iCore i7-2600 3,4GHz, 12GM RAM, 1280x1014 / 60Hz.
Pls HELP me!
Of course, genuine full version.
THX, Istvan.
- DD Stanislaw
- Administrator
- Posts: 6269
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
bankii wrote:FS9 error message
I've tried the same thing with NVIDIA 3D settings (Quadro K5000M) and the result was an FS9 crash each 5 minutes (no 9.1 update though).DD Stanislaw wrote:FS9's crashes are usually related to no 9.1 update installed or to wrongly assigned graphic settings in your graphic card. Any edge smoothing (AA / Anizo filtering) done by your graphic card instead of your sim, might lead to its crash. The balance is very delicate and it is not related to our scenery in particular. And the VAS memory usage is marginal (obviously it is always nice to have 4-6 GB of RAM onboard).
-
- 26-49 posts
- Posts: 49
- Joined: Sunday 22 Sep 2013, 08:29
- Location: Switzerland
Hi Stan
Unfortunately for me the same. My fs9 crashes every time at UUEE. Don't have this problem with other addons, although my PC is a bit old, other addons are working well.
It crashes also with the lowest version installed(all 4possible boxes activated) and without Ai traffic. But strange, the Fps are ok. Fs9.1 patch is installed.
Regards
Unfortunately for me the same. My fs9 crashes every time at UUEE. Don't have this problem with other addons, although my PC is a bit old, other addons are working well.
It crashes also with the lowest version installed(all 4possible boxes activated) and without Ai traffic. But strange, the Fps are ok. Fs9.1 patch is installed.
Regards
Best Regards
Patrick
Patrick
Hi Stаnislаwbankii wrote:Hi Stanislaw!
My problem is that the new scenery after 5-7 minutes of the restart FS9 error message, and if I'm using an older UUEE it will run without problems in the FS.
The operating system is Win7, Nvidia GeForce GTX 465 typ. video card, Intel iCore i7-2600 3,4GHz, 12GM RAM, 1280x1014 / 60Hz.
Pls HELP me!
Of course, genuine full version.
THX, Istvan.
I hаve sаme problem. 7-10 minutes scenery working. Аfter 10 minutes crаsh. But your scenery EETN is very good working, hаve not problem. Аnd i hаve more scenery from FSDreаm, Cloud9, Аerosofts, аll sceneries is prefect working, but UUEE is working for 7-10 min аnd sim crаsh((((. Mаy be repаir UUEE to light scenery?)))) I hаve а FS9.1 version.
Thx
For those who have an OOM error with the brand new UUEE 2015 scenery please do the following:
1. Create new folder ('UUEE_2015_LC' for example) with 'scenery' subfolder inside
2. Move two LD_*.bgl files into the 'UUEE_2015_LC\scenery' folder
3. Add UUEE_2015_LC to the FS9 Scenery Library below UUEE 2015 scenery
4. Run FS
The method above works for me.
Stan, I have noticed two minor bugs:
- blurred textures of the hangar near to RWY 07L threshold
- flickering textures of the hangar close to terminals C and B
Btw afcad is terrible but it should be easily fixed on my own.
1. Create new folder ('UUEE_2015_LC' for example) with 'scenery' subfolder inside
2. Move two LD_*.bgl files into the 'UUEE_2015_LC\scenery' folder
3. Add UUEE_2015_LC to the FS9 Scenery Library below UUEE 2015 scenery
4. Run FS
The method above works for me.
Stan, I have noticed two minor bugs:
- blurred textures of the hangar near to RWY 07L threshold
- flickering textures of the hangar close to terminals C and B
Btw afcad is terrible but it should be easily fixed on my own.
-
- 26-49 posts
- Posts: 49
- Joined: Sunday 22 Sep 2013, 08:29
- Location: Switzerland
-
- 26-49 posts
- Posts: 49
- Joined: Sunday 22 Sep 2013, 08:29
- Location: Switzerland
First of all, thank you again Petrovich for the OOM solution. After I did this, I could do a test flight without OOM. Will try to do some several more this evening.
@all
After I arrived, I had flickering ground textures. I loaded my flight att UUEE (the ground textures were ok, took off, did a short trip at around 12'000 ft and landed back after app.20min on RWY 25L. After vacating from the Runway, this is how it looks like:
http://img.webme.com/pic/p/patrickc/afcad.jpg
There is no other AFCAD included.
Regards
Patrick
@all
After I arrived, I had flickering ground textures. I loaded my flight att UUEE (the ground textures were ok, took off, did a short trip at around 12'000 ft and landed back after app.20min on RWY 25L. After vacating from the Runway, this is how it looks like:
http://img.webme.com/pic/p/patrickc/afcad.jpg
There is no other AFCAD included.
Regards
Patrick
Best Regards
Patrick
Patrick
-
- 26-49 posts
- Posts: 49
- Joined: Sunday 22 Sep 2013, 08:29
- Location: Switzerland
All at all a great scenery. It would be nice if you can fix the mentioned issues. An other point I want to ask for is the performance-optimisation. During the approach with my Level D 767 I don't reach the level of 24 frames, most of the time my frames are between 18 and 22. Deactivating the AI-Traffic brings one/two additional frames... But it's also stuttering in the end.
Compared with the MAP Paris CDG it's absolutely confusing. Same conditions (time, settings and LevelD-aircraft), more buidlings, more AI-aircrafts and still frames between 30 and 45...
I can't remember any other scenery whose framerate is as terrible as UUEE.
In my UUEE installation I've removed the static cars and airplanes. But when I deactivate all the details I've enough frames, but then the airport isn't comparable with any other scenery at the moment.
Therefore I want to aks, if there are any further performance-fixes planed or is this issue a mistake caused by myself?
Thank you very much!
Greetings
Felix
Compared with the MAP Paris CDG it's absolutely confusing. Same conditions (time, settings and LevelD-aircraft), more buidlings, more AI-aircrafts and still frames between 30 and 45...
I can't remember any other scenery whose framerate is as terrible as UUEE.
In my UUEE installation I've removed the static cars and airplanes. But when I deactivate all the details I've enough frames, but then the airport isn't comparable with any other scenery at the moment.
Therefore I want to aks, if there are any further performance-fixes planed or is this issue a mistake caused by myself?
Thank you very much!
Greetings
Felix
How to resolve flickering ground textures issue:
1. Download file linked below
https://www.dropbox.com/s/u7aso2qe7mj1b ... t.bgl?dl=0
2. Put it into FS2004/Scenery/World/Scenery
3. Run FS9 and check ground textures
4. Post a short report here
1. Download file linked below
https://www.dropbox.com/s/u7aso2qe7mj1b ... t.bgl?dl=0
2. Put it into FS2004/Scenery/World/Scenery
3. Run FS9 and check ground textures
4. Post a short report here