Chicago Airports X
Latest version: v1.4 (2020)
- DD Stanislaw
- Administrator
- Posts: 6272
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: Chicago Airports X
Hi.
A texture is missing there. Please try reinstalling the DEMO with admin rights.
A texture is missing there. Please try reinstalling the DEMO with admin rights.
Re: Chicago Airports X
Hi, I have read all the posts and unfortunately cannot find a solution. At KMDW I am seeing the FSX default runways/taxiways and ramp. I did have Flytampa's product but have completely removed it. Any suggestions much appreciated.
Regards...
Regards...
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Are you sure that you have the last version 1.1b installed in your sim? Such problem took place in the initial version, but it was fixed. I suggest the following steps:
- remove our scenery
- make sure that there are no other files relating to these airports in your sim
- download the last installer from your shop again
- install it with admin rights
Re: Chicago Airports X
Hi, It tells me it is version 1.1b. I purchased it from pcaviator.com. I always install with admin rights to avoid problems. I have re-installed a number of times and have removed everything Chicago. It's strange as KORD and KPWK are fine. I shall post a screenshot a little later. Thanks for your prompt response.
Re: Chicago Airports X
I have attached a screenshot for you showing the problem. I have double checked the install version and it is 1.1b
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Can you please attach the "information.txt" file located in Addon Scenery\Product name Documents folder? How it look like in your scenery library? Do you have any other addons that may affect this area?
We didn't get any similar reports after releasing last version. Please also put some more screenshots here showing scenery's details and mix of textures. It's still possible that you have a different afcad or other file from the old scenery, which has an influence to our scenery.
We didn't get any similar reports after releasing last version. Please also put some more screenshots here showing scenery's details and mix of textures. It's still possible that you have a different afcad or other file from the old scenery, which has an influence to our scenery.
-
- 2-4 posts
- Posts: 3
- Joined: Sunday 16 Jun 2019, 18:49
- Name: Jacob
Re: Chicago Airports X
Hi, the dropbox link for the quickfix for the ILS28C at KORD is broken for me, and others on this forum as well.
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
As far as I know it should have been solved in v1.1 - which version do you use?
Re: Chicago Airports X
Hi, As per your request please find attached more photos of the ramp and runway areas. I have also pasted the contents of my information file below. I have checked and double checked there are no AFCAD files for KMDW or Midway anywhere or anything close to Chicago. I have checked my Scenery Library and ensured Chicago is on top.
[SYSTEM]
OS=Windows 7
Date=06/16/2019
Time=21:53:26
[PRODUCT]
Product Name=Chicago Airports X
Product Version=v1.1_b
Product path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Addon Scenery\Chicago X
addonXMLpath=%addonXMLpath%
[FLIGHTSIM]
Sim main Folder=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X
Sim Selection=604
CFG file path=C:\Users\Trevor\AppData\Roaming\Microsoft\FSX\fsx.cfg
add-on.cfg folder path=C:\Users\Trevor\AppData\Roaming\Microsoft\FSX
scenery.cfg path=C:\ProgramData\Microsoft\FSX\scenery.cfg
[SODE]
SODE files=C:\ProgramData\12bPilot\SODE
[SYSTEM]
OS=Windows 7
Date=06/16/2019
Time=21:53:26
[PRODUCT]
Product Name=Chicago Airports X
Product Version=v1.1_b
Product path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Addon Scenery\Chicago X
addonXMLpath=%addonXMLpath%
[FLIGHTSIM]
Sim main Folder=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X
Sim Selection=604
CFG file path=C:\Users\Trevor\AppData\Roaming\Microsoft\FSX\fsx.cfg
add-on.cfg folder path=C:\Users\Trevor\AppData\Roaming\Microsoft\FSX
scenery.cfg path=C:\ProgramData\Microsoft\FSX\scenery.cfg
[SODE]
SODE files=C:\ProgramData\12bPilot\SODE
You do not have the required permissions to view the files attached to this post.
Re: Chicago Airports X
I have deleted the "Addon Scenery\Chicago X DEMO" folder and re-installed the DEMO ver 1.3 using admin. I have done this twice. But, no improvements. I still see a hallow of square box around the lights at KORD only.Hi.
A texture is missing there. Please try reinstalling the DEMO with admin rights.
another screen shot at KORD RWY 28C https://ibb.co/Prst312
If you know which texture is missing, could you please identify the name of the missing texture file? I can look it up.
Thanks for your assistance.
-
- 13-25 posts
- Posts: 13
- Joined: Saturday 25 May 2019, 00:49
- Name: mikey
Re: Chicago Airports X
Hi what I did to fix the KMDW ground was I went back to the 1.0 "Chicago airport X" I kept only the KMDW_ground.bgl 5/20/2019 2,943 KB file and put that back in to the folder and I turn OFF the KMDW_ground.bgl to .OFF 5/26/2019 9,786 KB and that worked for me .
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
Ok, so I understand that you don't see our ground at all. It's not a mix of textures interpenetrating each other, right?
On the other hand - can you please confirm tha we are talking about FSX version and during the install process you choosed FSX as your sim.
On the other hand - can you please confirm tha we are talking about FSX version and during the install process you choosed FSX as your sim.
-
- 2-4 posts
- Posts: 3
- Joined: Sunday 16 Jun 2019, 18:49
- Name: Jacob
Re: Chicago Airports X
I use v1.1 in P3D 4.4Martin_Starski wrote: ↑Sunday 16 Jun 2019, 19:19 As far as I know it should have been solved in v1.1 - which version do you use?
Re: Chicago Airports X
Hi, reading Mike Tower's post would that solve my issue. Can you send me the version 1 KMDW ground.bgl so I can test it. I seem to have the same problem not seeing the ground.
Regards
Trevor
Regards
Trevor
- Martin_Starski
- 200+ posts
- Posts: 3429
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: Chicago Airports X
You may download the file from here:
https://drive.google.com/file/d/1h4V6a2 ... sp=sharing
The file should go to: FS\scenery\0302\scenery
Please let me know about the result.