KRNT Renton MSFS

[agent45]

Thank you.

[StaynAlive9365]

Having an issue with long load times (>6 minutes) starting a flight from KRNT. Attached is a few lines from the debug console showing where the slowdown occurs. I'm on the Play Store version (PC) with all the latest updates. If I delete the Add-on, load time is just a few seconds.... I've also deleted and reinstalled many times (it installs to the "Offical" folder) trying different things including deleting the rolling, manual, and NVIDIA shader caches. Any ideas?
I also have your Seattle Landmarks product which seems to load fine. Thanks John

14:42:52 Loading: ‘vfs://drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.BGL{3644B93A-95B2-42F1-E39A-7EB60F766BC0}[x0]’
14:44:29 Loading: ‘vfs://drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.BGL{3644B93A-95B2-42F1-E39A-7EB60F766BC0}[x2]’
14:46:18 Loading: ‘vfs://drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.BGL{B5F7876D-FD38-404A-2D2E-3A3C97381BF0}[x0]’
14:46:23 Loading: ‘vfs://drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_W.BGL{3BB603BD-E7F0-4044-0E45-0E468F34BE78}[x0]’
14:47:39 Loading: ‘vfs://drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.BGL{B5F7876D-FD38-404A-2D2E-3A3C97381BF0}[x1]’

(about 4.5 minutes for these few items, 6 minutes overall)

[Martin_Starski]

Hi, we have never noticed any significant increase in the loading time. Such long loading time was reported once and it was probably somehow connected with the so-called "Addon Linker method". However, we've never been able to replicate such an issue.

[DD Stanislaw]

The information.cfg might help as this might be a memory issue.

[mmatga2me99]

I also noticed a large increase in load times (1-2 minutes longer) when loading in at this airport or in the general area (1WA6) after installing this airport. Did a quick un-install of the airport to make sure it wasn't the Seattle scenery which was significantly faster. Tried loading in down in Oregon and didn't have any issue until I approached the Seattle area at which point I CDT'd. Frames seem to be fine once I am at the airport, but there is something causing a large hit, that I don't see over in the DC area when running both KDCA and the Washington area scenery.

[Martin_Starski]

Can you provide your PC specs and information.cfg file? From which store do you have the installer?

[mmatga2me99]

Can you provide your PC specs and information.cfg file? From which store do you have the installer?

I picked it up on orbx a day ago.

I am unable to locate an information.cfg file in C:\Users\xxxxx\AppData\Roaming\Microsoft Flight Simulator\Packages\Community\drzewieckidesign-krnt

Code: Select all

[b]CPU:[/b] Intel Core i5-13600KF 3.5 GHz 14-Core Processor (BX8071513600KF)
[b]CPU COOLER:[/b] ARCTIC Liquid Freezer II 240 56.3 CFM Liquid CPU Cooler (ACFRE00046A)
[b]MB:[/b] Gigabyte B760 AORUS ELITE AX ATX LGA1700 Motherboard (B760 AORUS ELITE AX)
[b]MEMORY:[/b] G.Skill Ripjaws S5 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory (F5-6000J3040F16GX2-RS5K)
[b]STORAGE:[/b] Western Digital Black SN770 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive (WDS200T3X0E)
[b]STORAGE:[/b] Seagate BarraCuda 750 GB 3.5″ 7200 RPM Internal Hard Drive (ST3750528AS)
[b]STORAGE:[/b] Seagate BarraCuda 750 GB 3.5″ 7200 RPM Internal Hard Drive (ST3750528AS)
[b]GPU:[/b] XFX Speedster MERC 319 Radeon RX 6950 XT 16 GB Video Card (RX-695XATBD9)
[b]CASE:[/b] Corsair 4000D Airflow ATX Mid Tower Case (CC-9011201-WW)
[b]PSU:[/b] Corsair RM850x (2021) 850 W 80+ Gold Certified Fully Modular ATX Power Supply (CP-9020200-NA)

[b]CPU Benchmark:[/b] https://www.userbenchmark.com/UserRun/60416389 [\code]

[Martin_Starski]

Thanks - we need to take a look, because so far we have not been able to replicate such an issue.

[mmatga2me99]

At the point it starts to hang (about 2/3rd of the way) while loading into the airport the CPU ranges between 30-40% GPU is 25-40% and memory stays at about 71%. Once the airport loads in CPU is 18-30% GPU 35-40% and memory drops to 65%. Takes about 2-3 minutes to load in, first load is longer. Without Renton it's about 30 seconds.

[DD Stanislaw]

Do you have it installed on the SSD or on those HDDs?

[Martin_Starski]

We tried to replicate your problem, but we failed. However, we tried with our installer and you have the installer from Orbx.
There is a small chance that something is caused by the Orbx installer, but this is a guess only.
Regarding fps, we can try to provide you with the file excluding animations and sounds - the question is if you have access to the following file to replace it: community/drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.bgl

[mmatga2me99]

I do

[mmatga2me99]

Do you have it installed on the SSD or on those HDDs?

SSD

[Martin_Starski]

You may try to test the file, which removes all animations and sounds - you can download it from the following link: https://www.dropbox.com/s/jczjzfjui010q ... E.BGL?dl=0

You need to replace the same file from the following location: .../community/drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.bgl (please back up the existing file - just in case).

We are looking for your feedback.

[mmatga2me99]

You may try to test the file, which removes all animations and sounds - you can download it from the following link: https://www.dropbox.com/s/jczjzfjui010q ... E.BGL?dl=0

You need to replace the same file from the following location: .../community/drzewieckidesign-krnt/scenery/KRNT Renton MSFS/KRNT_BLDG_E.bgl (please back up the existing file - just in case).

We are looking for your feedback.

Significantly faster. Did 3 separate load in with the first being the longest as expected. Took about 15 seconds from the same point I was getting the 2-3 minutes before, which was the last 25% of the load in.

CPU: 25-53%
Memory: 53% (Improved)
GPU: 15% (Improved)