Polish Airports vol.1 X
Latest version: v5.1 (2020)
Jeszcze jedno
Czy tylko ja tak mam, że na nie wszystkich stanowiskach pokazanych na mapach (dołączonych do scenerii) da się ,,zalogować"? Mam na myśli to, że nie ma ich w (current location) choose runway/starting position np. stanowisko 40 w Katowicach lub 37 w Gdańsku.
PS co do mojego poprzedniego problemu, to wystarczyło wyłączyć DX10.
PS co do mojego poprzedniego problemu, to wystarczyło wyłączyć DX10.
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
No to juz mogę spać spokojnie.Marek2704 wrote:Pas odśnieżony
Możliwe, że nie da się na "mniej istotnych" lub na tych zajętych przez samoloty statyczne, ale sprawdzę to jeszcze przed publikacją aktualizacji.Jacek13 wrote:Czy tylko ja tak mam, że na nie wszystkich stanowiskach pokazanych na mapach (...) da się ,,zalogować"?
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Hi Stanislaw,DD Stanislaw wrote:Still working on EPLB mesh issue. It seems that we have found the solution and I would appreciate if you could test the file below:
http://rapidshare.com/share/5A0D66CBC25 ... CADDE59A53
Simply put the BGL file into: FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery folder and try to fly to EPLB from another airport. It should work fine now.
Very nice work! Great profissionalism! Thanks a lot.
Regards,
Carlos
Carlos Pimentel
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Our customers, who have this product, will be soon notified by stores about the new version available (v3.3). Changes in the new version (including v3.2 updates):
- Updated charts including ILS approach at EPLB airport
- Updated manual
- Fixed car traffic issues with UTX Europe installed
- Fixed compatibility issues with Electronic Flight Bag by Aivlasoft (ILS directions)
- Fixed compatibility issues with Aerosoft AES (static marshaller removed)
- Added ILS at EPLB Lublin airport
- Added ATIS at EPLB Lublin airport
- Volumetric grass at all airports
- EPLB - enhanced night lighting, fixed AFCAD, twy signs, tower view
- EPLB - mesh problem while arriving from a different airport fixed
- EPKT - new runway under construction visible
- Autogen fixes at all airports
- Compatibility with Prepar3D v2.1 and higher
DEMO has been already updated to v3.3 .
- Updated charts including ILS approach at EPLB airport
- Updated manual
- Fixed car traffic issues with UTX Europe installed
- Fixed compatibility issues with Electronic Flight Bag by Aivlasoft (ILS directions)
- Fixed compatibility issues with Aerosoft AES (static marshaller removed)
- Added ILS at EPLB Lublin airport
- Added ATIS at EPLB Lublin airport
- Volumetric grass at all airports
- EPLB - enhanced night lighting, fixed AFCAD, twy signs, tower view
- EPLB - mesh problem while arriving from a different airport fixed
- EPKT - new runway under construction visible
- Autogen fixes at all airports
- Compatibility with Prepar3D v2.1 and higher
DEMO has been already updated to v3.3 .
-
- 13-25 posts
- Posts: 13
- Joined: Wednesday 20 Jun 2012, 16:57
- Location: £ód¼, Poland
W najnowszym changelogu stoi:DD Stanislaw wrote:Michale, niestety nie jestem w stanie odtworzyć problemu z meshem w EPLB, próbowałem w najróżniejszych ustawieniach. Na Twoim filmie ewidentnie nie działa żaden z dwóch opcji flatten, zastosowanych na lotnisku, gdyż cały teren lotniska, nie tylko pas startowy, jest bardzo pofalowany. Być może przyjdzie Ci do głowy jakiś program, który mógłby mieć wpływ na ten teren - mi na razie żadne rozwiązanie do głowy nie przyszło niestety.
"EPLB - mesh problem while arriving from a different airport fixed"
Proszę o potwierdzenie czy ten fix to rozwiązanie problemów o których pisałem na tym forum czy coś innego
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Dokładnie tak. Można zresztą sobie sprawdzić kilka postów wcześniej sam plik.
DD Stanislaw wrote:http://rapidshare.com/share/7DFB12BF8F4 ... DD4263F5E5
Simply put the BGL file into: FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery folder and try to fly to EPLB from another airport.
Thanks for that. Do I have to uninstall first?DD Stanislaw wrote:Our customers, who have this product, will be soon notified by stores about the new version available (v3.3). Changes in the new version (including v3.2 updates):
- Updated charts including ILS approach at EPLB airport
- Updated manual
- Fixed car traffic issues with UTX Europe installed
- Fixed compatibility issues with Electronic Flight Bag by Aivlasoft (ILS directions)
- Fixed compatibility issues with Aerosoft AES (static marshaller removed)
- Added ILS at EPLB Lublin airport
- Added ATIS at EPLB Lublin airport
- Volumetric grass at all airports
- EPLB - enhanced night lighting, fixed AFCAD, twy signs, tower view
- EPLB - mesh problem while arriving from a different airport fixed
- EPKT - new runway under construction visible
- Autogen fixes at all airports
- Compatibility with Prepar3D v2.1 and higher
DEMO has been already updated to v3.3 .
Regards, Chris
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland