UUEE Moscow Sheremetyevo X V2
Latest version: v2.3 (2020)
Hi,
simmarket informed me today of the update and I downloaded and installed v1.6. Before that I removed the prior installed version v1.3 from the disks.
I just tested at Gate 36 and the jetway animation is working ok.
Some minor comments on the scenery and the usage of SODE from my side:
1. I choose to install the 'lite' textures but the fsx.cfg was still modified to 'TEXTURE_MAX_LOAD=4096' and there was no backup made before modifying,
2. the docking position of the jetway is pre-compiled and fixed. SODE would be able to move a jetway to the exact position of the exit door,
3. testing at gate 36 I found that the taxiline on the ground, the VDGS and the position of the docked jetway are in a mismatch. I tested with an Wilco/feelthere Embraer 190.
Thanks for your scenery and the free update.
Regards
Hans
simmarket informed me today of the update and I downloaded and installed v1.6. Before that I removed the prior installed version v1.3 from the disks.
I just tested at Gate 36 and the jetway animation is working ok.
Some minor comments on the scenery and the usage of SODE from my side:
1. I choose to install the 'lite' textures but the fsx.cfg was still modified to 'TEXTURE_MAX_LOAD=4096' and there was no backup made before modifying,
2. the docking position of the jetway is pre-compiled and fixed. SODE would be able to move a jetway to the exact position of the exit door,
3. testing at gate 36 I found that the taxiline on the ground, the VDGS and the position of the docked jetway are in a mismatch. I tested with an Wilco/feelthere Embraer 190.
Thanks for your scenery and the free update.
Regards
Hans
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
I confirm.HansW wrote:1. I choose to install the 'lite' textures but the fsx.cfg was still modified to 'TEXTURE_MAX_LOAD=4096' and there was no backup made before modifying
Only after remaking all the jetways from scratch which we had no resources for right now.HansW wrote:SODE would be able to move a jetway to the exact position of the exit door
As soon as SODE provides a native VGDS functionality it will be possible to have all those things precisely matched!HansW wrote:VDGS and the position of the docked jetway are in a mismatch. I tested with an Wilco/feelthere Embraer 190.
Missing jetway connector at gate E34
Hello, just did an update of UUEE to v1.6 in FSX SP2 this morning. Installed it without static aircraft and AES support. I noticed the jetway connecter of gate E34 is missing:
Can this please be fixed?
Can this please be fixed?
Thanks for the free upgrade
You mention a third runway. Where is it? Or have I misunderstood?
Edit: I know what's wrong. I made the mistake of buying from Aerosoft. They have changed their user centre info to read V1.6, but the version you download is V1.4
Can you ask them to provide the updated version please?
You mention a third runway. Where is it? Or have I misunderstood?
Edit: I know what's wrong. I made the mistake of buying from Aerosoft. They have changed their user centre info to read V1.6, but the version you download is V1.4
Can you ask them to provide the updated version please?
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
UUEE v1.6 with AES:
1. Remove the old version of the scenery from the sim
2. Run AESHelp to set that there is no UUEE scenery installed
3. Install the new version of the scenery
4. Run AESHelp to activate the UUEE support again.
1. Удалить из сима старую версию сцены;
2. запустить AESHelp, чтобы в ней отметилось, что сценария нет;
3. поставить новую версию сцены;
4. запустить AESHelp, чтобы AES для сцены снова активировался.
1. Remove the old version of the scenery from the sim
2. Run AESHelp to set that there is no UUEE scenery installed
3. Install the new version of the scenery
4. Run AESHelp to activate the UUEE support again.
1. Удалить из сима старую версию сцены;
2. запустить AESHelp, чтобы в ней отметилось, что сценария нет;
3. поставить новую версию сцены;
4. запустить AESHelp, чтобы AES для сцены снова активировался.
Thanks to Simrussia for the hint.
Hello!
Got an elevation problem with the last version.
https://i.gyazo.com/d16afec03008a2082d7 ... 5d49ec.jpg
https://i.gyazo.com/2c865daf9ccbb52dbd6 ... 8f571a.jpg
I use FSX SP2 dx10 with ORBX FTXG+Open LC+Vector+FS GLOBAL 2010. Previous version was OK.
Got an elevation problem with the last version.
https://i.gyazo.com/d16afec03008a2082d7 ... 5d49ec.jpg
https://i.gyazo.com/2c865daf9ccbb52dbd6 ... 8f571a.jpg
I use FSX SP2 dx10 with ORBX FTXG+Open LC+Vector+FS GLOBAL 2010. Previous version was OK.
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Tried this workaround twice, before posting here. Didn't help for me. After the second installation of scenery(step 9) UUEE_ALT.bgl appears again and is dated 09.08.2014.DD Stanislaw wrote:I think it is the same issue as here: http://forum.simrussia.com/index.php?/t ... ent=121491
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
I have reinstalled simulator from scratch, and the issue is still there. Also one strange moment, i've noticed. After the workaround mentioned above i tryed to. Remove alt_uuee.bgl then deactivated and activated the scenery. Then scene loaded correctly for one time. And then old problems again. Also i got some similar issues when tryed to deactivate vector lc, then for only one time scene loaded correctly.DD Stanislaw wrote:Did you fully remove the older version of the scenery? There were some older mesh files that are not used now.