NY Airports v2 X
Latest version: v2.6 (2020)
Re: NY Airports v2 X
My JFK airports RW04L and taxiways next to it are very glitchy and they are covered By some ground textures.
I would send a photo but I cant bc the file is too big.
Regards,
Teemu
I would send a photo but I cant bc the file is too big.
Regards,
Teemu
Re: NY Airports v2 X
Hello all,
I am having an issue in the New York Area with momentary freezes. This happens when I have NYv2 active and not active. When flying over or into NY area, it will freeze for couple seconds to minute or two then unfreeze and do that on a cycle until out of the area or landed. If you have any ideas why this might be that would be awesome!
Jason
I am having an issue in the New York Area with momentary freezes. This happens when I have NYv2 active and not active. When flying over or into NY area, it will freeze for couple seconds to minute or two then unfreeze and do that on a cycle until out of the area or landed. If you have any ideas why this might be that would be awesome!
Jason
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Ok, next question.... Anyway that the taxiways for A & B can be linked together? Giving me off taxi instructions due to this I think.
http://prntscr.com/j8y3ez
Thanks - just noticed when I flew KJFK to KMIA this evening!
http://prntscr.com/j8y3ez
Thanks - just noticed when I flew KJFK to KMIA this evening!
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi.
They are linked with runway links (supported by default AI but not visible on your screenshot).
Taxiways links flatten terrain - it would not be possible to make taxiway bridges using taxiway links.
They are linked with runway links (supported by default AI but not visible on your screenshot).
Taxiways links flatten terrain - it would not be possible to make taxiway bridges using taxiway links.
Re: NY Airports v2 X
Stanislaw,
I have downloaded updated files for several of your sceneries. Do I just install them over the old versions, or do I need to uninstall the old ones first?
Thanks -
Jorgen
I have downloaded updated files for several of your sceneries. Do I just install them over the old versions, or do I need to uninstall the old ones first?
Thanks -
Jorgen
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi.
In all our newer products (specifically those supporting 218+ Install Procedure: http://drzewiecki-design.net/forum/view ... ?f=3&t=412 ) you do not need to remove previous versions. For other products it is better to at least remove the product's folder from the Addon Scenery folder.
In all our newer products (specifically those supporting 218+ Install Procedure: http://drzewiecki-design.net/forum/view ... ?f=3&t=412 ) you do not need to remove previous versions. For other products it is better to at least remove the product's folder from the Addon Scenery folder.
-
- 2-4 posts
- Posts: 2
- Joined: Sunday 29 Apr 2018, 05:19
Re: NY Airports v2 X
Hi guys!
First of all, thank you for providing Demo Versions! That's really great!
Anyway, I'm thinking of buying the New York Airports. Especially for JFK I am looking for a good version to replace the FSDT version.
I installed the demo version of JFK (and only JFK) to try it out. All I am asking, who already bought DD NY Airports v2 say the fps are great, there is no real difference between Default and the DD airports.
Nevertheless, I have fps-problems, already with the Demo Version.
With the FSDT-Version i'm getting around 35-40 fps in the PMDG 777. With default, around 40-50 fps.
With the DD-Version, only 20-25 fps. To be honest, thats a bit to low for me and it doesn't match the other statements about the fps in DD JFK.
There are no other JFK-versions installed, no LGA, no EWR, no double AFCADs. Just DD JFK.
Default:
DD-JFK:
Do you have an idea what's wrong there? Is the performance with the full version of JFK better?
I have normally no fps-problems, even in AS EGLL I'm getting more than 30 fps on approach with the PMDG.
My system:
I7-7820X at 4,3 GHz, GTX980, 16 GB DDR4-RAM, 3x 512 GB SSD, ASUS ROG STRIX X299-E Gaming, Windows 10 Pro x64 (english version)
Sim: Prepar3Dv4.2
Thank you very much in advance!
Kind regards
Matthias
First of all, thank you for providing Demo Versions! That's really great!
Anyway, I'm thinking of buying the New York Airports. Especially for JFK I am looking for a good version to replace the FSDT version.
I installed the demo version of JFK (and only JFK) to try it out. All I am asking, who already bought DD NY Airports v2 say the fps are great, there is no real difference between Default and the DD airports.
Nevertheless, I have fps-problems, already with the Demo Version.
With the FSDT-Version i'm getting around 35-40 fps in the PMDG 777. With default, around 40-50 fps.
With the DD-Version, only 20-25 fps. To be honest, thats a bit to low for me and it doesn't match the other statements about the fps in DD JFK.
There are no other JFK-versions installed, no LGA, no EWR, no double AFCADs. Just DD JFK.
Default:
DD-JFK:
Do you have an idea what's wrong there? Is the performance with the full version of JFK better?
I have normally no fps-problems, even in AS EGLL I'm getting more than 30 fps on approach with the PMDG.
My system:
I7-7820X at 4,3 GHz, GTX980, 16 GB DDR4-RAM, 3x 512 GB SSD, ASUS ROG STRIX X299-E Gaming, Windows 10 Pro x64 (english version)
Sim: Prepar3Dv4.2
Thank you very much in advance!
Kind regards
Matthias
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi.
DEMOs are really not a good idea to judge FPS impact. They are much simplier but on the other hand a lot of files are not present which may slow down the sim since it is looking for f/e missing textures.
Generally our customers are reporting a significant improvement over the other developer's version and definitely our version is more up-to-date than all other available, but obviously I am not able to guarantee what amount of FPS you are going to get on your system. This might give you a general idea though: https://www.youtube.com/results?search_ ... i+new+york
DEMOs are really not a good idea to judge FPS impact. They are much simplier but on the other hand a lot of files are not present which may slow down the sim since it is looking for f/e missing textures.
Generally our customers are reporting a significant improvement over the other developer's version and definitely our version is more up-to-date than all other available, but obviously I am not able to guarantee what amount of FPS you are going to get on your system. This might give you a general idea though: https://www.youtube.com/results?search_ ... i+new+york
-
- 2-4 posts
- Posts: 2
- Joined: Sunday 29 Apr 2018, 05:19
Re: NY Airports v2 X
Hm, ok, thank you!
Then I guess I'll just buy it and give it a try...
Then I guess I'll just buy it and give it a try...
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
-
- 13-25 posts
- Posts: 16
- Joined: Thursday 13 Jul 2017, 02:07
- Location: USA
Re: NY Airports v2 X
Hi there,
I just found some issues with EWR in terms of the AFCAD. Most of the C gates spawn you onto the wrong gate. (ex. I choose C73 but went to C72 which is across the terminal.) I have also had issues with other gates at C1 (C70-99) Please fix this.
I just found some issues with EWR in terms of the AFCAD. Most of the C gates spawn you onto the wrong gate. (ex. I choose C73 but went to C72 which is across the terminal.) I have also had issues with other gates at C1 (C70-99) Please fix this.
Thanks,
Sam Wheeler
Sam Wheeler
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Hi there, I have just purchased this product from Just Flight, and all I get are the files, but no installer. please advise.