NY Airports v2 X
Latest version: v2.6 (2020)
Re: NY Airports v2 X
indeed I also have NY cities, and yes I have the last version, I'll see that, thank you for your answer =)
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
I would rather say that this might be from another AFD file installed somewhere and being active.
Re: NY Airports v2 X
Fellows,
I installed the following the other day on my FSX and P3Dv4 on my system:
DRZEWIECKI DESIGN NEW YORK CITY X,
NY Airports v2 X KEWR-KCDW-KLDJ
NY Airports v2 X KJFK-KLGA-KTEB
Washington X
However, when I load one of those airport, my FSX crashes. I was never able to fly to see DRZEWIECKI DESIGN NEW YORK CITY X how it came to be. Is there any issue this scenery has with FSX?
Please any suggestion will be much appreciated
Ernest Magawa
I installed the following the other day on my FSX and P3Dv4 on my system:
DRZEWIECKI DESIGN NEW YORK CITY X,
NY Airports v2 X KEWR-KCDW-KLDJ
NY Airports v2 X KJFK-KLGA-KTEB
Washington X
However, when I load one of those airport, my FSX crashes. I was never able to fly to see DRZEWIECKI DESIGN NEW YORK CITY X how it came to be. Is there any issue this scenery has with FSX?
Please any suggestion will be much appreciated
Ernest Magawa
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
There shouldn't be any problem with our scenery in both FSX and P3D.
According to your description it's hard to say anything more, because we even don't know if there is any message after crash or when does this crash appear. Maybe there is an issue relating to the installation in both FSX and P3D on the same PC, but frankly speaking on the basis of your information we are not able to identify the cause of problem.
According to your description it's hard to say anything more, because we even don't know if there is any message after crash or when does this crash appear. Maybe there is an issue relating to the installation in both FSX and P3D on the same PC, but frankly speaking on the basis of your information we are not able to identify the cause of problem.
Re: NY Airports v2 X
Good morning,
I was not able to find any other traces of this, but I discovered that I have some original P3D taxiways signs still present in your scenery. I am using also ORBX and FTX, but I have no idea where to look to get ride of the original taxiway signs still appearing in the middle of taxiways...
Thanks for your input.
Cyrille
I was not able to find any other traces of this, but I discovered that I have some original P3D taxiways signs still present in your scenery. I am using also ORBX and FTX, but I have no idea where to look to get ride of the original taxiway signs still appearing in the middle of taxiways...
Thanks for your input.
Cyrille
Re: NY Airports v2 X
Here is a picture, it will help to understand may be.
Cyrille
Cyrille
You do not have the required permissions to view the files attached to this post.
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Hi Cyrille! I'm not pretty sure if they are default signs. Is it P3D v4? Which airport from the package are we talking about?
Re: NY Airports v2 X
Hi,
Yes P3DV4 JFK from NY airport V2
Cyrille
Yes P3DV4 JFK from NY airport V2
Cyrille
- DD Stanislaw
- Administrator
- Posts: 6273
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Re: NY Airports v2 X
Cyrille, please let me know which version of the product is this. Is it v1 or v2?
Re: NY Airports v2 X
Hello,
A while ago I've purchased NY v2 scenery and never used it until yesterday due to one reason or another. So I did a flight from CYYZ to KJFK and everything was nice and smooth until I was fully established on the ILS 13L. Roughly about 8 miles out I've got a massive stuttering turning into slideshow with FPS 8 -15. Upon 100 FT AAL the frame rate returned to normal around 30-35. Touching down was smooth as butter. After reading a bit of the thread I see some small amount of users are reporting similar issues and FPS. Any suggestions what the issue could be?
I am running :
CPU: i7-7700K (OC'd to 4.9Ghz)
GPU: Asus GTX 1080
MEM: Corsair 32GB
SSD: 1TB Samsung EVO 970
I do not have any other problems with scenery and FPS is normally smooth.
P3D Settings:
A while ago I've purchased NY v2 scenery and never used it until yesterday due to one reason or another. So I did a flight from CYYZ to KJFK and everything was nice and smooth until I was fully established on the ILS 13L. Roughly about 8 miles out I've got a massive stuttering turning into slideshow with FPS 8 -15. Upon 100 FT AAL the frame rate returned to normal around 30-35. Touching down was smooth as butter. After reading a bit of the thread I see some small amount of users are reporting similar issues and FPS. Any suggestions what the issue could be?
I am running :
CPU: i7-7700K (OC'd to 4.9Ghz)
GPU: Asus GTX 1080
MEM: Corsair 32GB
SSD: 1TB Samsung EVO 970
I do not have any other problems with scenery and FPS is normally smooth.
P3D Settings:
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Which version of P3D are we talking about?
Such fps drop could have been caused because of loading something but it's really hard to say anything more. Maybe SODE jetways, but it's only my presumption
Have you duplicated it during the another approach to 13L or any other runway?
Do you maybe have any other addons for this area?
Such fps drop could have been caused because of loading something but it's really hard to say anything more. Maybe SODE jetways, but it's only my presumption
Have you duplicated it during the another approach to 13L or any other runway?
Do you maybe have any other addons for this area?
Re: NY Airports v2 X
Hi thanks for you reply. Preapr3d 4.4 in use. No other add-ons in the area. I did not have time to re-test the scenario but will try tonight and let you know.
Re: NY Airports v2 X
Ok so I've done some testing and came up with following:
Test 1:
Just an approach 13L to verify the problem can be replicated. And yes, same thing happened as described above. Stuttering (10 - 15 FPS) at about 8 miles out and going smooth 100 FT AAL.
Test 2:
Approach 04R. Slightly better than 13L. Still stuttering at 6-8 miles out but higher FPS (15-22), going smooth at 100 FT AAL.
Test 3:
Disabled DD NYv2 from P3D Scenery, running default KJFK, approach 13L, no stuttering. Nice and smooth landing. FPS (30-35)
Test 4:
Disabled DD NYv2 from P3D Scenery, running default KJFK, approach 04R, no stuttering. Nice and smooth landing. FPS (35-40)
Test 5:
Re-enabled DD NYv2, approach 13L, problem returns exactly as described.
Please note: I have ORBX FTX Global & Open LC NA installed. Regarding SODE, I have latest version 1.6.4 installed. I have no idea why is this happening, but I don't have this problem at other airports atm. From my testing (in my personal case) it appears something is up with NYv2 scenery but I don't know what. I've looked for a scenery configurator to try lowering some settings, but did not find one in the scenery folder. Also have to admit, I own a few more airports from you and they are running nice and smooth. In the current scenario NYv2 is pretty much unusable since it ruins my approach. Any help would be appreciated.
Cheers
Test 1:
Just an approach 13L to verify the problem can be replicated. And yes, same thing happened as described above. Stuttering (10 - 15 FPS) at about 8 miles out and going smooth 100 FT AAL.
Test 2:
Approach 04R. Slightly better than 13L. Still stuttering at 6-8 miles out but higher FPS (15-22), going smooth at 100 FT AAL.
Test 3:
Disabled DD NYv2 from P3D Scenery, running default KJFK, approach 13L, no stuttering. Nice and smooth landing. FPS (30-35)
Test 4:
Disabled DD NYv2 from P3D Scenery, running default KJFK, approach 04R, no stuttering. Nice and smooth landing. FPS (35-40)
Test 5:
Re-enabled DD NYv2, approach 13L, problem returns exactly as described.
Please note: I have ORBX FTX Global & Open LC NA installed. Regarding SODE, I have latest version 1.6.4 installed. I have no idea why is this happening, but I don't have this problem at other airports atm. From my testing (in my personal case) it appears something is up with NYv2 scenery but I don't know what. I've looked for a scenery configurator to try lowering some settings, but did not find one in the scenery folder. Also have to admit, I own a few more airports from you and they are running nice and smooth. In the current scenario NYv2 is pretty much unusable since it ruins my approach. Any help would be appreciated.
Cheers
- Martin_Starski
- 200+ posts
- Posts: 3437
- Joined: Monday 24 Sep 2012, 11:11
- Name: Marcin
- Location: Warszawa
Re: NY Airports v2 X
Just run the installer again and you will be able to configure each airport.
I will try to check if I can replicate this problem in my environment.
Re: NY Airports v2 X
I tried the installer and pretty much just removed the static aircrafts, but it didn't make any difference. I will be checking regularly here to see you test results. I wonder if you can replicate this.Martin_Starski wrote: ↑Friday 22 Mar 2019, 10:45 Just run the installer again and you will be able to configure each airport.
I will try to check if I can replicate this problem in my environment.
Thanks