Polish Airports vol.1 X

[Dion]

Here I had the same problem but somehow I managed to fix it myself. I just forgot how I did that, will try to see if I can find that again.

[cpimentel]

Hi Carlos.
I have no idea. It seems like there is mesh problem but I have never seen something like this in this scenery.

.

Hi Stanislaw,

After my previous communication and your reply, I reinstalled the scenery and I went back to do some tests and came to the following conclusions:

1. When I launch FS starting from EPLB, I have no problem.
2. When I launch FS starting from any other Polish airport flying to EPLB, then I find the problems that have been reported.
3. I also checked that EPLB is not listed in the defaults FSX sceneries.

I appreciate that you try to reproduce the same situation flying from a Polish airport (eg EPRZ) to EPLB. I can not imagine that you do not find this problem because I have nothing wrong with all the other Polish sceneries (Vol.1 & Vol.3) except with this EPLB. In my opinion the problem must be with this EPLB. Please check and found a solution.

Regards,
Carlos

[DD Stanislaw]

Yes, thank you for this report. This will definitely be tested.

I also checked that EPLB is not listed in the defaults FSX sceneries.

It should be there under EPLB. Please try to remove the AFX_EPSW.bgl from FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery , as a temporary solution (might not work). We will investigate both issues asap.

[cpimentel]

Yes, thank you for this report. This will definitely be tested.

I also checked that EPLB is not listed in the defaults FSX sceneries.

It should be there under EPLB. Please try to remove the AFX_EPSW.bgl from FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery , as a temporary solution (might not work). We will investigate both issues asap.

Hi Stanislaw,

Unfortunately your tip didn't work

Regards,
Carlos

[mkoterba]

After my previous communication and your reply, I reinstalled the scenery and I went back to do some tests and came to the following conclusions:

1. When I launch FS starting from EPLB, I have no problem.
2. When I launch FS starting from any other Polish airport flying to EPLB, then I find the problems that have been reported.
3. I also checked that EPLB is not listed in the defaults FSX sceneries.

Mam ten sam problem i również zainstalowany Ultimate Terrain X.

[cpimentel]

More printscreens

http://i796.photobucket.com/albums/yy24 ... 5fcaa2.png
http://i796.photobucket.com/albums/yy24 ... addfe7.png

[DD Stanislaw]

Ok, I was able to recreate the problem. It will be fixed in the next update (before Christmas).

[cpimentel]

Ok, I was able to recreate the problem. It will be fixed in the next update (before Christmas).

Good news Stanislaw!!! Merry Christmas!

Carlos

[Jacek13]

Na lotnisku EPKT oświetlenie pasa, dróg kołowania i budynków lotniska włącza się dopiero po dotknięciu kołami pasa. Jedyne ciągle działające oświetlanie to żółto-czerwony pasek położony na trawie, pomiędzy pasem, a płytą lotniska (przepraszam za brak fachowej nazwy). Proszę o pomoc!
Polish Airports vol.1 X 3.2 (ustawiona na najwyższy priorytet)
FSX SP2
DX10 on
Windows 8.1 64bit
4gb ram
Nvidia 8800gt
Amd Athlon x2 5000+ 2.6 (OC to 3.0)
Msi K9n Ultra

[DD Stanislaw]

Witam.
Nigdy nie było takiego raportu, więc trudno określić, co takiego może powodować błąd.

[Jacek13]

Po ustawieniu:
LOD_RADIUS=8.500000
światła nagle zapłonęły!
Przepraszam za problem

[DD Stanislaw]

A, to cieszę się że jest w porządku, i dziękuję za info o problemie.

[DD Stanislaw]

Still working on EPLB mesh issue. It seems that we have found the solution and I would appreciate if you could test the file below:
http://rapidshare.com/share/5A0D66CBC25 ... CADDE59A53
Simply put the BGL file into: FSX\Addon Scenery\Polish Airports vol.1\EPLB_X\Scenery folder and try to fly to EPLB from another airport. It should work fine now.

[Marek2704]

Niestety śniegu przybywa

http://imageshack.com/a/img202/6103/mqtv.jpg

Po zalogowaniu się w Lublinie pas jest czysty, po przylocie z Rzeszowa taki jak widać na powyższym zdjęciu - klęska żywiołowa...

[DD Stanislaw]

Ok, dzięki za info. Jeszcze jedna próba i również byłbym wdzięczny za raport:
http://rapidshare.com/share/7DFB12BF8F4 ... DD4263F5E5